Motor Units



  Foredom LX Hang-Up Motor with EMX-1 Dial Control, 115 Volt

Retail Price: $315.00
You save: $31.50  (10%)
Our Price: $283.50

Foredom LX Hang-Up Motor with EMX-1 Dial Control, 115 Volt

Foredom M.LX Hang-Up Motor with C.EMX-1 Dial Control, 115 Volt. Hang-up motor with key tip shaft and protective sheath plus dial control in plastic housing. Here our high torque/low speed flex shaft model, the M.LX hang-up style motor, is teamed up with the C.EMX-1 table top dial speed control in plastic housing. M.LX Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LX Motors and Controls. M.LX motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.EMX-1 Speed Control Description: The C.EMX-1 looks the same as our standard table top control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.EMX-1 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EMX-1 also has a replaceable fuse that protects the electronics during power surges and work overloads. For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors5" long, 5-3 4" wide, 2-5 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.LX-EMX Manufacturer : Foredom
  Foredom LX Hang-Up Motor with SXR-1 Foot Control, 115 Volt

Retail Price: $315.00
You save: $31.50  (10%)
Our Price: $283.50

Foredom LX Hang-Up Motor with SXR-1 Foot Control, 115 Volt

Foredom M.LX Hang-Up Motor with C.SXR-1 Foot Control, 115 Volt. Hang-up motor with key tip shaft and protective sheath plus foot operated control in metal housing. Here our high torque/low speed flex shaft model, the M.LX hang-up style motor, is teamed up with the C.SXR-1 foot operated speed control in metal housing. M.LX Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LX Motors and Controls. M.LX motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.SXR-1 Speed Control Description: This foot operated speed control comes in a metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.TXR-1. The ergonomics allow precise and reliable speed control with your foot. The C.SXR-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a special plug that fits the motor's shielded plug.For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. It is interchangeable with Foredom's C.TXR-1 and C.EMX-1 controls.6-3/4" long, 4" wide, 2-3/8" high, ship wt-6 lbs./2.7 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.LX-SXR Manufacturer : Foredom
  Foredom LX Hang-Up Motor with TXR-1 Foot Control, 115 Volt

Retail Price: $285.00
You save: $28.50  (10%)
Our Price: $256.50

Foredom LX Hang-Up Motor with TXR-1 Foot Control, 115 Volt

Foredom M.LX Hang-Up Motor with C.TXR-1 Foot Control, 115 Volt. Hang-up motor with key tip shaft and protective sheath plus foot control in plastic housing. Here our high torque/low speed flex shaft model, the M.LX hang-up style motor, is teamed up with the C.TXR-1 foot operated speed control in plastic housing. M.LX Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LX Motors and Controls. M.LX motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.TXR-1 Speed Control Description: This foot operated speed control is made of heavy duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. It is interchangeable with Foredom's C.SXR-1 and C.EMX-1 controls. 7" long, 4-1 2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.LX-TXR Manufacturer : Foredom
  Foredom LXB Bench Motor with EMX-1 Dial Control, 115 Volt

Retail Price: $345.00
You save: $34.50  (10%)
Our Price: $310.50

Foredom LXB Bench Motor with EMX-1 Dial Control, 115 Volt

Foredom M.LXB Bench Motor with C.EMX-1 Dial Control, 115 Volt. Bench motor with key tip shaft and protective sheath plus dial control in plastic housing. Here a bench style version of Foredom's High Torque/Low Speed Series LX motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.EM-1 table top dial speed control in plastic housing. M.LXB Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LXB Motors and Controls. M.LXB motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.EMX-1 Speed Control Description: The C.EMX-1 looks the same as our standard table top control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.EMX-1 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EMX-1 also has a replaceable fuse that protects the electronics during power surges and work overloads. 5" long, 5-3 4" wide, 2-5 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.LXB-EMX Manufacturer : Foredom
  Foredom LXB Bench Motor with SXR-1 Foot Control, 115 Volt

Retail Price: $345.00
You save: $34.50  (10%)
Our Price: $310.50

Foredom LXB Bench Motor with SXR-1 Foot Control, 115 Volt

Foredom M.LXB Bench Motor with C.SXR-1 Foot Control, 115 Volt. Bench motor with key tip shaft and protective sheath plus foot operated control in metal housing. Here a bench style version of Foredom's High Torque/Low Speed Series LX motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.EM-1 table top dial speed control in plastic housing. M.LXB Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LXB Motors and Controls. M.LXB motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.SXR-1 Speed Control Description: This foot operated speed control comes in a metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.TXR-1. The ergonomics allow precise and reliable speed control with your foot. The C.SXR-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a special plug that fits the motor's shielded plug.For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. 6-3/4" long, 4" wide, 2-3/8" high, ship wt-6 lbs./2.7 kg.It is interchangeable with Foredom's C.TXR-1 and C.EMX-1 controls. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.LXB-SXR Manufacturer : Foredom
  Foredom LXB Bench Motor with TXR-1 Foot Control, 115 Volt

Retail Price: $315.00
You save: $31.50  (10%)
Our Price: $283.50

Foredom LXB Bench Motor with TXR-1 Foot Control, 115 Volt

Foredom M.LXB Bench Motor with C.TXR-1 Foot Control, 115 Volt. Bench motor with key tip shaft and protective sheath plus foot control in plastic housing. Here a bench style version of Foredom's High Torque/Low Speed Series LX motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.EM-1 table top dial speed control in plastic housing. M.LXB Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LXB Motors and Controls. M.LXB motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.TXR-1 Speed Control Description: This foot operated speed control is made of heavy duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. It is interchangeable with Foredom's C.SXR-1 and C.EMX-1 controls. 7" long, 4-1 2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.LXB-TXR Manufacturer : Foredom
  Foredom LXM Bench Motor with Built-in Dial Control, 115 Volt

Retail Price: $320.00
You save: $32.00  (10%)
Our Price: $288.00

Foredom LXM Bench Motor with Built-in Dial Control, 115 Volt

Foredom M.LXM Bench Motor with Built-in Dial Control, 115 Volt. Bench motor with built-in dial speed control in cast iron base. Here a bench style version of Foredom's Low Speed/High Torque Series LX motor has an integrated dial speed control built into its cast-iron base for manual speed adjustment and easy placement anywhere on the workbench. M.LXM Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LXM Motors and Controls.M.LXM motors are available in 115 Volt and 230 Volt. Built-in Speed Control Description: The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.LXM Manufacturer : Foredom
  Foredom SR Hang-Up Motor with EM-1 Dial Speed Control, 115 Volt

Retail Price: $274.00
You save: $27.40  (10%)
Our Price: $246.60

Foredom SR Hang-Up Motor with EM-1 Dial Speed Control, 115 Volt

Foredom M.SR Hang-Up Motor with C.EM-1 Dial Speed Control, 115 Volt. Hang-up motor with key tip shaft and protective sheath plus dial control in plastic housing. Here our most popular flex shaft model, the M.SR hang-up style motor, is teamed up with the C.EM-1 table top dial speed control in plastic housing. M.SR Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SR combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. It comes equipped with a motor bale for hanging, and our standard 39" long key-tip inner shaft and outer sheath for connecting to any of Foredom s 20+ interchangeable, quick disconnect handpieces. C.EM-1 Speed Control Description: The C.EM-1 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit. The C.EM-1 also has a replaceable fuse that protects the electronics during power surges and work overloads. 5" long, 5-3 4" wide, 2-5 8" high, ship wt- 2 lbs./1 kg. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls. M.SR motors are available in both 115 Volt and 230 Volt. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.SR-EM Manufacturer : Foredom
  Foredom SR Hang-Up Motor with FCT-1 Foot Control, 115 Volt

Retail Price: $240.00
You save: $24.00  (10%)
Our Price: $216.00

Foredom SR Hang-Up Motor with FCT-1 Foot Control, 115 Volt

Hang-up motor with key tip shaft and protective sheath plus foot control in plastic housing.  Here our most popular flex shaft model, the M.SR hang-up style motor, is teamed up with the C.FCT-1 foot operated speed control in plastic housing. CSA listed. M.SR Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SR combines the most important features our customers expect–power, reversibility, reliability, and versatility– all into one motor. It comes equipped with a motor bale for hanging, and our standard 39" long key-tip inner shaft and outer sheath for connecting to any of Foredom’s 20+ interchangeable, quick disconnect handpieces. C.FCT-1 Speed Control Description:  The reliable C.FCT-1 is Foredom’s most popular speed control. It features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. It provides smooth control throughout the entire speed range. CSA listed. 7" long, 4-1⁄2" wide, 2-3⁄8" high,  ship wt– 2 lbs./1 kg. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls.  M.SR motors are available in both 115 Volt and 230 Volt. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.  Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.SR-FCT Manufacturer : Foredom
  Foredom SR Hang-Up Motor with SCT-1 Foot Control, 115 Volt

Retail Price: $274.00
You save: $27.40  (10%)
Our Price: $246.60

Foredom SR Hang-Up Motor with SCT-1 Foot Control, 115 Volt

Foredom M.SR Hang-Up Motor with C.SCT-1 Foot Control, 115 Volt. Hang-up motor with key tip shaft and protective sheath plus foot control in metal housing. Here our most popular flex shaft model, the M.SR hang-up style motor, is teamed up with the C.SCT-1 foot operated speed control in metal housing. CSA listed. M.SR Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SR combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and outer sheath for connecting to any of Foredom s 20+ interchangeable, quick disconnect handpieces. C.SCT-1 Speed Control Description: The C.SCT-1 offers the same electronics and smooth control as the C.FCT-1 but in a much heavier, cast iron housing. The added weight eliminates any unexpected movement of the control along the floor. The bottom surface of the speed control is covered with non-skid material. CSA listed. 6-3 4" long, 4" wide, 2-3 8" high, ship wt- 6 lbs./2.7 kg. Motor Details: The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls. M.SR motors are available in both 115 Volt and 230 Volt. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.SR-SCT Manufacturer : Foredom
  Foredom SRB Bench Motor with EM-1 Dial Control, 115 Volt

Retail Price: $304.00
You save: $30.40  (10%)
Our Price: $273.60

Foredom SRB Bench Motor with EM-1 Dial Control, 115 Volt

Foredom M.SRB Bench Motor with C.EM-1 Dial Control, 115 Volt. Bench motor with key tip shaft and protective sheath plus dial control in plastic housing. Here a bench style version of Foredom's 1/6 HP Series SR motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.EM-1 table top dial speed control in plastic housing. M.SRB Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SRB combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. It comes equipped with our standard 39" long key tip inner shaft and outer sheath for connecting to any of Foredom s 20+ interchangeable, quick disconnect handpieces. C.EM-1 Speed Control Description: This table top speed control is constructed of heavy duty plastic with durable solid state electronics. It has a dial control for precise speed settings, as well as good repeatability of previous settings. For use with 115 Volt Series SR, SRB, SRH and SRBH motors. 5" long, 5-3/4" wide, 2-5/8" high, ship wt-2 lbs./1 kg. It is interchangeable with Foredom's C.FCT-1 and C.SCT-1 controls. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls. M.SRB motors are available in both 115 Volt and 230 Volt. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.SRB-EM-1 Manufacturer : Foredom
  Foredom SRB Bench Motor with FCT-1 Foot Control, 115 Volt

Retail Price: $270.00
You save: $27.00  (10%)
Our Price: $243.00

Foredom SRB Bench Motor with FCT-1 Foot Control, 115 Volt

Foredom M.SRB Bench Motor with C.FCT-1 Foot Control, 115 Volt. Bench motor with key tip shaft and protective sheath plus foot control in plastic housing.
Model : M.SRB-FCT Manufacturer : Foredom
  Foredom SRB Bench Motor with SCT-1 Foot Control, 115 Volt

Retail Price: $304.00
You save: $30.40  (10%)
Our Price: $273.60

Foredom SRB Bench Motor with SCT-1 Foot Control, 115 Volt

Foredom M.SRB Bench Motor with C.SCT-1 Foot Control, 115 Volt. Bench motor with key tip shaft and protective sheath plus foot control in metal housing. Here a bench style version of Foredom's 1/6 HP Series SR motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.SCT-1 foot operated speed control in metal housing. CSA listed. M.SRB Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. It comes equipped with an inner shaft, outer sheath, and motor bale (for hanging up). The M.SRB combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. It comes equipped with our standard 39" long key tip inner shaft and outer sheath for connecting to any of Foredom s 20+ interchangeable, quick disconnect handpieces. C.SCT-1 Speed Control Description: The C.SCT-1 offers the same electronics and smooth control as the C.FCT-1 but in a much heavier, cast iron housing. The added weight eliminates any unexpected movement of the control along the floor. The bottom surface of the speed control is covered with non-skid material. CSA listed. 6-3 4" long, 4" wide, 2-3 8" high, ship wt- 6 lbs./2.7 kg. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls. M.SRB motors are available in both 115 Volt and 230 Volt. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.SRB-SCT Manufacturer : Foredom
  Foredom SRM Bench Motor with Built-in Dial Control, 115 Volt

Retail Price: $279.00
You save: $27.90  (10%)
Our Price: $251.10

Foredom SRM Bench Motor with Built-in Dial Control, 115 Volt

Foredom M.SRM Bench Motor with Built-in Dial Control, 115 Volt. Bench motor with built-in dial speed control in cast iron base. Here a bench style version of Foredom's 1/6 HP Series SR motor has an integrated dial speed control built into its cast-iron base for manual speed adjustment and easy placement anywhere on the workbench. M.SRM Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SRM combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. It comes equipped with our standard 39" long key tip inner shaft and outer sheath for connecting to any of Foredom s 20+ interchangeable, quick disconnect handpieces. Built-in Speed Control Description: The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls. M.SRM motors are available in both 115 Volt and 230 Volt. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.SRM Manufacturer : Foredom
  Foredom TX Hang-Up Motor with EMX-1 Dial Control, 115 Volt

Retail Price: $340.00
You save: $34.00  (10%)
Our Price: $306.00

Foredom TX Hang-Up Motor with EMX-1 Dial Control, 115 Volt

Foredom M.TX Hang-Up Motor with C.EMX-1 Dial Control, 115 Volt. Hang-up motor with key tip shaft and protective sheath plus dial control in plastic housing. Here our high torque/low speed flex shaft model, the M.TX hang-up style motor, is teamed up with the C.EMX-1 table top dial speed control in plastic housing. M.TX Motor Description: Series TX motors are Foredom s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. The M.TX hang-up model is also available in prepackaged kits K.TX300 and K.5400. Two year warranty on 1/3 HP Series TX Motors and Controls. M.TX motors are available ONLY in 115 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.EMX-1 Speed Control Description: The C.EMX-1 looks the same as our standard table top control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.EMX-1 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EMX-1 also has a replaceable fuse that protects the electronics during power surges and work overloads. 5" long, 5-3 4" wide, 2-5 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.TX-EMX Manufacturer : Foredom
  Foredom TX Hang-Up Motor with SXR-1 Foot Control, 115 Volt

Retail Price: $340.00
You save: $34.00  (10%)
Our Price: $306.00

Foredom TX Hang-Up Motor with SXR-1 Foot Control, 115 Volt

Foredom M.TX Hang-Up Motor with C.SXR-1 Foot Control, 115 Volt. Hang-up motor with key tip shaft and protective sheath plus foot operated control in metal housing. Here our higher torque flex shaft model, the M.TX hang-up style motor, is teamed up with the C.SXR-1 foot operated speed control in metal housing. M.TX Motor Description: Series TX motors are Foredom s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. The M.TX hang-up model is also available in prepackaged kits K.TX300 and K.5400. Two year warranty on 1/3 HP Series TX Motors and Controls. M.TX motors are available ONLY in 115 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.SXR-1 Speed Control Description: This foot operated speed control comes in a metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.TXR-1. The ergonomics allow precise and reliable speed control with your foot. The C.SXR-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a special plug that fits the motor's shielded plug.For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. 6-3/4" long, 4" wide, 2-3/8" high, ship wt-6 lbs./2.7 kg.It is interchangeable with Foredom's C.TXR-1 and C.EMX-1 controls. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.TX-SXR Manufacturer : Foredom
  Foredom TX Hang-Up Motor with TXR-1 Foot Control, 115 Volt

Retail Price: $310.00
You save: $31.00  (10%)
Our Price: $279.00

Foredom TX Hang-Up Motor with TXR-1 Foot Control, 115 Volt

Foredom M.TX Hang-Up Motor with C.TXR-1 Foot Control, 115 Volt. Hang-up motor with key tip shaft and protective sheath plus foot operated control in plastic housing. Here our higher torque flex shaft model, the M.TX hang-up style motor, is teamed up with the C.TXR-1 foot operated speed control in plastic housing. M.TX Motor Description: Series TX motors are Foredom s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. The M.TX hang-up model is also available in prepackaged kits K.TX300 and K.5400. Two year warranty on 1/3 HP Series TX Motors and Controls. M.TX motors are available ONLY in 115 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.TXR-1 Speed Control Description: This foot operated speed control is made of heavy duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. It is interchangeable with Foredom's C.SXR-1 and C.EMX-1 controls. 7" long, 4-1 2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.TX-TXR Manufacturer : Foredom
  Foredom TXB Bench Motor with EMX-1 Dial Control, 115 Volt

Retail Price: $370.00
You save: $37.00  (10%)
Our Price: $333.00

Foredom TXB Bench Motor with EMX-1 Dial Control, 115 Volt

Foredom M.TXB Bench Motor with C.EMX-1 Dial Control, 115 Volt. Bench motor with key tip shaft and protective sheath plus dial control in plastic housing. Here a bench style version of Foredom's 1/3 HP Series TX motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.EM-1 table top dial speed control in plastic housing. M.TXB Motor Description: Series TX motors are Foredom s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on 1/3 HP Series TX Motors and Controls. M.TXB motors are available ONLY in 115 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.EMX-1 Speed Control Description: The C.EMX-1 looks the same as our standard table top control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series TX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.EMX-1 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EMX-1 also has a replaceable fuse that protects the electronics during power surges and work overloads. 5" long, 5-3 4" wide, 2-5 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.TXB-EM Manufacturer : Foredom
  Foredom TXB Bench Motor with SXR-1 Foot Control, 115 Volt

Retail Price: $370.00
You save: $37.00  (10%)
Our Price: $333.00

Foredom TXB Bench Motor with SXR-1 Foot Control, 115 Volt

Foredom M.TXB Bench Motor with C.SXR-1 Foot Control, 115 Volt. Bench motor with key tip shaft and protective sheath plus foot operated control in metal housing. Here a bench style version of Foredom's 1/3 HP Series TX motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.TXR-1 foot operated speed control in plastic housing. M.TXB Motor Description: Series TX motors are Foredom s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on 1/3 HP Series TX Motors and Controls. M.TXB motors are available ONLY in 115 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.SXR-1-1 Speed Control Description: This foot operated speed control comes in a metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.TXR-1. The ergonomics allow precise and reliable speed control with your foot. The C.SXR-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a special plug that fits the motor's shielded plug.For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. 6-3/4" long, 4" wide, 2-3/8" high, ship wt-6 lbs./2.7 kg.It is interchangeable with Foredom's C.TXR-1 and C.EMX-1 controls. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.TXB-SXR Manufacturer : Foredom
  Foredom TXB Bench Motor with TXR-1 Foot Control, 115 Volt

Retail Price: $340.00
You save: $34.00  (10%)
Our Price: $306.00

Foredom TXB Bench Motor with TXR-1 Foot Control, 115 Volt

Foredom M.TXB Bench Motor with C.TXR-1 Foot Control, 115 Volt. Bench motor with key tip shaft and protective sheath plus foot operated control in plastic housing. Here a bench style version of Foredom's 1/3 HP Series TX motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.TXR-1 foot operated speed control in plastic housing. M.TXB Motor Description: Series TX motors are Foredom s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on 1/3 HP Series TX Motors and Controls. M.TXB motors are available ONLY in 115 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.TXR-1 Speed Control Description: This foot operated speed control is made of heavy duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. It is interchangeable with Foredom's C.SXR-1 and C.EMX-1 controls. 7" long, 4-1 2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.TXB-TXR Manufacturer : Foredom