Carbide Burs 1/8" Standard



  B-1 Carbide Bur - Standard Flute by Foredom

B-1 Carbide Bur - Standard Flute by Foredom

B-1 Carbide Bur - Standard Flute by ForedomCarbide bur with standard flutes in ball shape has a 1/8" head dia. and 1/8" head length, 1/8" shank, max speed: 100,000 rpm. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions. Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm
Model : 1 Manufacturer : Foredom
  B-2 Carbide Bur - Standard Flute by Foredom

B-2 Carbide Bur - Standard Flute by Foredom

B-2 Carbide Bur - Standard Flute by Foredom Carbide bur with standard flutes in ball shape has a 1/4" head dia. and 1/4" head length, 1/8" shank, max speed: 35,000rpm. Available in Standard or Cross Cut flute - see details. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions. Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm
Model : 2 Manufacturer : Foredom
  C0-1 Carbide Bur - Standard Flute by Foredom

C0-1 Carbide Bur - Standard Flute by Foredom

C0-1 Carbide Bur - Standard Flute by ForedomCarbide bur with standard flutes in cone shape has a 1/8" head dia. and 11/32" head length, 1/8" shank, max speed: 100,000rpm. Available in Standard or Cross Cut flute - see details. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions. Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm
Model : C0-1 Manufacturer : Foredom
  C0-2 Carbide Bur - Standard Flute by Foredom

C0-2 Carbide Bur - Standard Flute by Foredom

C0-2 Carbide Bur - Standard Flute by Foredom Carbide bur with standard flutes in cone shape has a 1/8" head dia. and 5/8" head length, 1/8" shank, max speed: 100,000rpm. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions. Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm
Model : C0-2 Manufacturer : Foredom
  C0-3 Carbide Bur - Standard Flute by Foredom

C0-3 Carbide Bur - Standard Flute by Foredom

C0-3C Carbide Bur - Cross Cut Flute by Foredom Carbide bur with standard flutes in cone shape has a 1/4" head dia. and 1/2" head length, 1/8" shank, max speed: 35,000rpm. Available in Standard or Cross Cut flute - see details. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions. Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm
Model : C0-3 Manufacturer : Foredom
  CP-1 Carbide Bur - Standard Flute by Foredom

CP-1 Carbide Bur - Standard Flute by Foredom

CP-1 Carbide Bur - Standard Flute by ForedomCarbide bur with standard flutes in cylinder square shape has a 3/32" head dia. and 7/16" head length, 1/8" shank, max speed: 100,000rpm. Available in Standard or Cross Cut flute - see details. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions. Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm
Model : CP-1 Manufacturer : Foredom
  CP-2 Carbide Bur - Standard Flute by Foredom

CP-2 Carbide Bur - Standard Flute by Foredom

CP-2 Carbide Bur - Standard Flute by ForedomCarbide bur with standard flutes in cylinder square shape has a 1/8" head dia. and 9/16" head length, 1/8" shank, max speed: 100,000rpm. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions. Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm
Model : CP2 Manufacturer : Foredom
  CP-3 Carbide Bur - Stardard Flute by Foredom

CP-3 Carbide Bur - Stardard Flute by Foredom

CP-3 Carbide Bur - Stardard Flute by ForedomCarbide bur with standard flutes in cylinder square shape has a 1/4" head dia. and 1/2" head length, 1/8" shank, max speed: 35,000rpm. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions. Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm
Model : CP-3 Manufacturer : Foredom
  CR-1 Carbide Bur - Standard Flute by Foredom

CR-1 Carbide Bur - Standard Flute by Foredom

CR-1 Carbide Bur - Standard Flute by ForedomCarbide bur with standard flutes in cylinder radius shape has a 3/32" head dia. and 7/16" head length, 1/8" shank, max speed: 100,000rpm. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions. Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm
Model : CR-1 Manufacturer : Foredom
  CR-2 Carbide Bur - Standard Flute by Foredom

CR-2 Carbide Bur - Standard Flute by Foredom

CR-2 Carbide Bur - Standard Flute by Foredom Carbide bur with standard flutes in cylinder radius shape has a 1/8" head dia. and 9/16" head length, 1/8" shank, max speed: 100,000rpm. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions. Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm
Model : CR-2 Manufacturer : Foredom
  CR-3 Carbide Bur - Standard Flute by Foredom

CR-3 Carbide Bur - Standard Flute by Foredom

CR-3C Carbide Bur - Cross Cut Flute by Foredom Carbide bur with standard flutes in cylinder radius shape has a 1/4" head dia. and 1/2" head length, 1/8" shank, max speed: 35,000rpm. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions. Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm
Model : CR-3 Manufacturer : Foredom
  F-1 Carbide Bur - Standard Flute by Foredom

F-1 Carbide Bur - Standard Flute by Foredom

F-1 Carbide Bur - Standard Flute by Foredom Carbide bur with standard flutes in tree point shape has a 1/8" head dia. and 1/4" head length, 1/8" shank, max speed: 100,000rpm. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions. Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm
Model : F-1 Manufacturer : Foredom
  IC-1 Carbide Bur - Standard Flute by Foredom

IC-1 Carbide Bur - Standard Flute by Foredom

IC-1 Carbide Bur - Standard Flute by ForedomCarbide bur with standard flutes in inverted cone shape has a 1/8" head dia. and 3/16" head length, 1/8" shank, max speed: 100,000rpm. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions.   Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm    
Model : IC-1 Manufacturer : Foredom
  IC-2 Carbide Bur - Standard Flute by Foredom

IC-2 Carbide Bur - Standard Flute by Foredom

IC-2 Carbide Bur - Standard Flute by Foredom Carbide bur with standard flutes in an inverted cone shape has a 1/4" head dia. and 1/4" head length, 1/8" shank, max speed: 35,000rpm. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions. � Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm � �
Model : IC-2 Manufacturer : Foredom
  OV-1 Carbide Bur - Standard Flute by Foredom

OV-1 Carbide Bur - Standard Flute by Foredom

OV-1 Carbide Bur - Standard Flute by ForedomCarbide bur with standard flutes in oval shape has a 1/8" head dia. and 7/32" head length, 1/8" shank, max speed: 100,000rpm. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions. Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm
Model : OV-1 Manufacturer : Foredom
  OV-2 Carbide Bur - Standard Flute by Foredom

OV-2 Carbide Bur - Standard Flute by Foredom

OV-2 Carbide Bur - Standard Flute by ForedomCarbide bur with standard flutes in oval shape has a 1/4" head dia. and 3/8" head length, 1/8" shank, max speed: 35,000rpm. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions. Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm
Model : OV-2 Manufacturer : Foredom
  T-1 Carbide Bur - Standard Flute by Foredom

T-1 Carbide Bur - Standard Flute by Foredom

T-1 Carbide Bur - Standard Flute by ForedomCarbide bur with standard flutes in taper shape has a 1/8" head dia. and 3/8" head length, 1/8" shank, max speed: 100,000rpm. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions. Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm
Model : T-1 Manufacturer : Foredom
  TP-1 Carbide Bur - Standard Flute by Foredom

TP-1 Carbide Bur - Standard Flute by Foredom

TP-1 Carbide Bur - Standard Flute by ForedomCarbide bur with standard flutes in tree point shape has a 1/8" head dia. and 1/4" head length, 1/8" shank, max speed: 100,000rpm. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions. Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm
Model : TP-1 Manufacturer : Foredom
  TP-2 Carbide Bur - Standard Flute by Foredom

TP-2 Carbide Bur - Standard Flute by Foredom

TP-2 Carbide Bur - Standard Flute by ForedomCarbide bur with standard flutes in tree point shape has a 1/8" head dia. and 3/8" head length, 1/8" shank, max speed: 100,000rpm. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions. Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm
Model : TP-2 Manufacturer : Foredom
  TP-3 Carbide Bur - Standard Flute by Foredom

TP-3 Carbide Bur - Standard Flute by Foredom

TP-3 Carbide Bur - Standard Flute by ForedomCarbide bur with standard flutes in tree point shape has a 1/4" head dia. and 1/2" head length, 1/8" shank, max speed: 35,000rpm. Carbide burs with standard and cross cut flutes are used for easy material removal and leave a smooth finish. These burs are ideal for use on hard wood and most metals including stainless steel, steel alloys, cast iron, etc. Foredom Carbide Burs are available in both Standard and Cross Cut versions. Cross cut flutes produce finer chips and leave a smoother finish but are not as aggressive as standard flutes. Max speed rating for 1/8" diameter carbides is 100,000 rpm Max speed rating for 1/4" diameter carbides is 35,000 rpm
Model : TP-3 Manufacturer : Foredom