TX Series 1/3HP



  Foredom TX Hang-Up Motor with EMX-1 Dial Control, 115 Volt

Retail Price: $340.00
You save: $34.00  (10%)
Our Price: $306.00

Foredom TX Hang-Up Motor with EMX-1 Dial Control, 115 Volt

Foredom M.TX Hang-Up Motor with C.EMX-1 Dial Control, 115 Volt. Hang-up motor with key tip shaft and protective sheath plus dial control in plastic housing. Here our high torque/low speed flex shaft model, the M.TX hang-up style motor, is teamed up with the C.EMX-1 table top dial speed control in plastic housing. M.TX Motor Description: Series TX motors are Foredom s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. The M.TX hang-up model is also available in prepackaged kits K.TX300 and K.5400. Two year warranty on 1/3 HP Series TX Motors and Controls. M.TX motors are available ONLY in 115 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.EMX-1 Speed Control Description: The C.EMX-1 looks the same as our standard table top control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.EMX-1 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EMX-1 also has a replaceable fuse that protects the electronics during power surges and work overloads. 5" long, 5-3 4" wide, 2-5 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.TX-EMX Manufacturer : Foredom
  Foredom TX Hang-Up Motor with SXR-1 Foot Control, 115 Volt

Retail Price: $340.00
You save: $34.00  (10%)
Our Price: $306.00

Foredom TX Hang-Up Motor with SXR-1 Foot Control, 115 Volt

Foredom M.TX Hang-Up Motor with C.SXR-1 Foot Control, 115 Volt. Hang-up motor with key tip shaft and protective sheath plus foot operated control in metal housing. Here our higher torque flex shaft model, the M.TX hang-up style motor, is teamed up with the C.SXR-1 foot operated speed control in metal housing. M.TX Motor Description: Series TX motors are Foredom s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. The M.TX hang-up model is also available in prepackaged kits K.TX300 and K.5400. Two year warranty on 1/3 HP Series TX Motors and Controls. M.TX motors are available ONLY in 115 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.SXR-1 Speed Control Description: This foot operated speed control comes in a metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.TXR-1. The ergonomics allow precise and reliable speed control with your foot. The C.SXR-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a special plug that fits the motor's shielded plug.For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. 6-3/4" long, 4" wide, 2-3/8" high, ship wt-6 lbs./2.7 kg.It is interchangeable with Foredom's C.TXR-1 and C.EMX-1 controls. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.TX-SXR Manufacturer : Foredom
  Foredom TX Hang-Up Motor with TXR-1 Foot Control, 115 Volt

Retail Price: $310.00
You save: $31.00  (10%)
Our Price: $279.00

Foredom TX Hang-Up Motor with TXR-1 Foot Control, 115 Volt

Foredom M.TX Hang-Up Motor with C.TXR-1 Foot Control, 115 Volt. Hang-up motor with key tip shaft and protective sheath plus foot operated control in plastic housing. Here our higher torque flex shaft model, the M.TX hang-up style motor, is teamed up with the C.TXR-1 foot operated speed control in plastic housing. M.TX Motor Description: Series TX motors are Foredom s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. The M.TX hang-up model is also available in prepackaged kits K.TX300 and K.5400. Two year warranty on 1/3 HP Series TX Motors and Controls. M.TX motors are available ONLY in 115 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.TXR-1 Speed Control Description: This foot operated speed control is made of heavy duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. It is interchangeable with Foredom's C.SXR-1 and C.EMX-1 controls. 7" long, 4-1 2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.TX-TXR Manufacturer : Foredom
  Foredom TXB Bench Motor with EMX-1 Dial Control, 115 Volt

Retail Price: $370.00
You save: $37.00  (10%)
Our Price: $333.00

Foredom TXB Bench Motor with EMX-1 Dial Control, 115 Volt

Foredom M.TXB Bench Motor with C.EMX-1 Dial Control, 115 Volt. Bench motor with key tip shaft and protective sheath plus dial control in plastic housing. Here a bench style version of Foredom's 1/3 HP Series TX motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.EM-1 table top dial speed control in plastic housing. M.TXB Motor Description: Series TX motors are Foredom s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on 1/3 HP Series TX Motors and Controls. M.TXB motors are available ONLY in 115 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.EMX-1 Speed Control Description: The C.EMX-1 looks the same as our standard table top control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series TX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.EMX-1 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EMX-1 also has a replaceable fuse that protects the electronics during power surges and work overloads. 5" long, 5-3 4" wide, 2-5 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.TXB-EM Manufacturer : Foredom
  Foredom TXB Bench Motor with SXR-1 Foot Control, 115 Volt

Retail Price: $370.00
You save: $37.00  (10%)
Our Price: $333.00

Foredom TXB Bench Motor with SXR-1 Foot Control, 115 Volt

Foredom M.TXB Bench Motor with C.SXR-1 Foot Control, 115 Volt. Bench motor with key tip shaft and protective sheath plus foot operated control in metal housing. Here a bench style version of Foredom's 1/3 HP Series TX motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.TXR-1 foot operated speed control in plastic housing. M.TXB Motor Description: Series TX motors are Foredom s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on 1/3 HP Series TX Motors and Controls. M.TXB motors are available ONLY in 115 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.SXR-1-1 Speed Control Description: This foot operated speed control comes in a metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.TXR-1. The ergonomics allow precise and reliable speed control with your foot. The C.SXR-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a special plug that fits the motor's shielded plug.For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. 6-3/4" long, 4" wide, 2-3/8" high, ship wt-6 lbs./2.7 kg.It is interchangeable with Foredom's C.TXR-1 and C.EMX-1 controls. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.TXB-SXR Manufacturer : Foredom
  Foredom TXB Bench Motor with TXR-1 Foot Control, 115 Volt

Retail Price: $340.00
You save: $34.00  (10%)
Our Price: $306.00

Foredom TXB Bench Motor with TXR-1 Foot Control, 115 Volt

Foredom M.TXB Bench Motor with C.TXR-1 Foot Control, 115 Volt. Bench motor with key tip shaft and protective sheath plus foot operated control in plastic housing. Here a bench style version of Foredom's 1/3 HP Series TX motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.TXR-1 foot operated speed control in plastic housing. M.TXB Motor Description: Series TX motors are Foredom s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on 1/3 HP Series TX Motors and Controls. M.TXB motors are available ONLY in 115 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.TXR-1 Speed Control Description: This foot operated speed control is made of heavy duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. It is interchangeable with Foredom's C.SXR-1 and C.EMX-1 controls. 7" long, 4-1 2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.TXB-TXR Manufacturer : Foredom
  Foredom TXM Bench Motor with Built-in Dial Control, 115 Volt

Retail Price: $345.00
You save: $34.50  (10%)
Our Price: $310.50

Foredom TXM Bench Motor with Built-in Dial Control, 115 Volt

Foredom M.TXM Bench Motor with Built-in Dial Control, 115 Volt. Bench motor with built-in dial speed control in cast iron base. Here a bench style version of Foredom's 1/3 HP Series TX motor has an integrated dial speed control built into its cast-iron base for manual speed adjustment and easy placement anywhere on the workbench. M.TXM Motor Description: Series TX motors are Foredom s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. No other flex shaft gives you greater control of the cutting tool, drill, or bur under any load. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on 1/3 HP Series TX Motors and Controls. M.TXM motors are available ONLY in 115 Volt. Built-in Speed Control Description: The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.TXM Manufacturer : Foredom
  Foredom TXBH Bench Motor with Heavy Duty Shafting and EMX-1 Dial Control, 115 Volt

Retail Price: $395.00
You save: $39.50  (10%)
Our Price: $355.50

Foredom TXBH Bench Motor with Heavy Duty Shafting and EMX-1 Dial Control, 115 Volt

Foredom M.TXBH Bench Motor with Heavy Duty Shafting and C.EMX-1 Dial Control, 115 Volt. Bench motor with heavy duty square drive shaft and protective sheath plus dial control in plastic housing. Here a bench style version of Foredom's higher torque flex shaft Series TXH motor comes mounted in a cast-iron base and equipped with a longer square drive shaft and heavy duty protective sheath. Bench style motors are designed for easy placement anywhere on the workbench. It is teamed up with the C.EMX-1 table top dial operated speed control in plastic housing. M.TXBH Motor Description: This heavy duty model has exactly the same motor specifications as the M.TXB. Series TXB motors are Foredom s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. Heavy duty flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones.This model comes equipped with a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's three square drive handpieces- the H.25H, H.30H and H.44HT. Two year warranty on 1/3 HP Series TXBH Motors and Controls. M.TXBH motors are available ONLY in 115 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.EMX-1 Speed Control Description: The C.EMX-1 looks the same as our standard table top control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series TX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.EMX-1 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit. The C.EMX-1 also has a replaceable fuse that protects the electronics during power surges and work overloads. 5" long, 5-3 4" wide, 2-5 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's three square drive handpieces - the H.25H, H.30H and H.44HT.
Model : M.TXBH-EMX Manufacturer : Foredom
  Foredom TXBH Bench Motor with Heavy Duty Shafting and SXR-1 Foot Control, 115 Volt

Retail Price: $395.00
You save: $39.50  (10%)
Our Price: $355.50

Foredom TXBH Bench Motor with Heavy Duty Shafting and SXR-1 Foot Control, 115 Volt

Foredom M.TXBH Bench Motor with Heavy Duty Shafting and C.SXR-1 Foot Control, 115 Volt. Bench motor with heavy duty square drive shaft and protective sheath plus foot control in metal housing. Here a bench style version of Foredom's higher torque flex shaft Series TXH motor comes mounted in a cast-iron base and equipped with a longer square drive shaft and heavy duty protective sheath. Bench style motors are designed for easy placement anywhere on the workbench. It is teamed up with the C.SXR-1 foot operated speed control in metal housing. M.TXBH Motor Description: This heavy duty model has exactly the same motor specifications as the M.TXB. Series TXB motors are Foredom s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. Heavy duty flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones.This model comes equipped with a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's three square drive handpieces- the H.25H, H.30H and H.44HT. Two year warranty on 1/3 HP Series TXBH Motors and Controls. M.TXBH motors are available ONLY in 115 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.SXR-1-1 Speed Control Description: This foot operated speed control comes in a metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.TXR-1. The ergonomics allow precise and reliable speed control with your foot. The C.SXR-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a special plug that fits the motor's shielded plug.For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. 6-3/4" long, 4" wide, 2-3/8" high, ship wt-6 lbs./2.7 kg.It is interchangeable with Foredom's C.TXR-1 and C.EMX-1 controls. Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's three square drive handpieces - the H.25H, H.30H and H.44HT.
Model : M.TXBH-SXR Manufacturer : Foredom
  Foredom TXBH Bench Motor with Heavy Duty Shafting and TXR-1 Foot Control, 115 Volt

Retail Price: $365.00
You save: $36.50  (10%)
Our Price: $328.50

Foredom TXBH Bench Motor with Heavy Duty Shafting and TXR-1 Foot Control, 115 Volt

Foredom M.TXBH Bench Motor with Heavy Duty Shafting and C.TXR-1 Foot Control, 115 Volt. Bench motor with heavy duty square drive shaft and protective sheath plus foot control in plastic housing. Here a bench style version of Foredom's higher torque flex shaft Series TXH motor comes mounted in a cast-iron base and equipped with a longer square drive shaft and heavy duty protective sheath. Bench style motors are designed for easy placement anywhere on the workbench. It is teamed up with the C.TXR-1 foot operated speed control in plastic housing. M.TXBH Motor Description: This heavy duty model has exactly the same motor specifications as the M.TXB. Series TXB motors are Foredom s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. Heavy duty flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones.This model comes equipped with a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's three square drive handpieces- the H.25H, H.30H and H.44HT. Two year warranty on 1/3 HP Series TXBH Motors and Controls. M.TXBH motors are available ONLY in 115 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.TXR-1 Speed Control Description: This foot operated speed control is made of heavy duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. It is interchangeable with Foredom's C.SXR-1 and C.EMX-1 controls. 7" long, 4-1 2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's three square drive handpieces - the H.25H, H.30H and H.44HT.
Model : M.TXBH-TXR Manufacturer : Foredom
  Foredom TXH Hang-Up Motor with Heavy Duty Shafting and EMX-1 Table Top Control, 115 Volt

Retail Price: $365.00
You save: $36.50  (10%)
Our Price: $328.50

Foredom TXH Hang-Up Motor with Heavy Duty Shafting and EMX-1 Table Top Control, 115 Volt

Foredom M.TXH Hang-Up Motor with Heavy Duty Shafting and C.EMX-1 Table Top Control, 115 Volt. Hang-up motor with heavy duty square drive shaft and protective sheath plus dial control in plastic housing.
Model : M.TXH-EMX Manufacturer : Foredom
  Foredom TXH Hang-Up Motor with Heavy Duty Shafting and SXR-1 Foot Control, 115 Volt

Retail Price: $365.00
You save: $36.50  (10%)
Our Price: $328.50

Foredom TXH Hang-Up Motor with Heavy Duty Shafting and SXR-1 Foot Control, 115 Volt

Foredom M.TXH Hang-Up Motor with Heavy Duty Shafting and C.SXR-1 Foot Control, 115 Volt. Hang-up motor with heavy duty square drive shaft and protective sheath plus foot control in metal housing. Here our higher torque flex shaft model, the M.TX hang-up style motor, is equipped with a longer square drive shaft and heavy duty protective sheath. It is teamed up with the C.SXR-1 foot operated speed control in metal housing. M.TXH Motor Description: This heavy duty model has exactly the same motor specifications as the M.TX. Series TX motors are Foredom s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. Heavy duty flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones.This model comes equipped with a motor bale for hanging, and a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's three square drive handpieces- the H.25H, H.30H and H.44HT. The M.TXH hang-up model is also available in prepackaged kit K.TXH440. Two year warranty on 1/3 HP Series TXH Motors and Controls. M.TXH motors are available ONLY in 115 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.SXR-1-1 Speed Control Description: This foot operated speed control comes in a metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.TXR-1. The ergonomics allow precise and reliable speed control with your foot. The C.SXR-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a special plug that fits the motor's shielded plug.For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. 6-3/4" long, 4" wide, 2-3/8" high, ship wt-6 lbs./2.7 kg.It is interchangeable with Foredom's C.TXR-1 and C.EMX-1 controls. Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's three square drive handpieces - the H.25H, H.30H and H.44HT. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.TXH-SXR Manufacturer : Foredom
  Foredom TXH Hang-Up Motor with Heavy Duty Shafting and TXR-1 Foot Control, 115 Volt

Retail Price: $335.00
You save: $33.50  (10%)
Our Price: $301.50

Foredom TXH Hang-Up Motor with Heavy Duty Shafting and TXR-1 Foot Control, 115 Volt

Foredom M.TXH Hang-Up Motor with Heavy Duty Shafting and C.TXR-1 Foot Control, 115 Volt. Hang-up motor with heavy duty square drive shaft and protective sheath plus foot control in plastic housing. Here our higher torque flex shaft model, the M.TX hang-up style motor, is equipped with a longer square drive shaft and heavy duty protective sheath. It is teamed up with the C.TXR-1 foot operated speed control in plastic housing. M.TXH Motor Description: This heavy duty model has exactly the same motor specifications as the M.TX. Series TX motors are Foredom s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. Heavy duty flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones.This model comes equipped with a motor bale for hanging, and a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's three square drive handpieces- the H.25H, H.30H and H.44HT. The M.TXH hang-up model is also available in prepackaged kit K.TXH440. Two year warranty on 1/3 HP Series TXH Motors and Controls. M.TXH motors are available ONLY in 115 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.TXR-1 Speed Control Description: This foot operated speed control is made of heavy duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. It is interchangeable with Foredom's C.SXR-1 and C.EMX-1 controls. 7" long, 4-1 2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's three square drive handpieces - the H.25H, H.30H and H.44HT. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.TXH-TXR Manufacturer : Foredom
  Foredom TXMH Bench Motor with Heavy Duty Shafting and Built-in Dial Control, 115 Volt

Retail Price: $370.00
You save: $37.00  (10%)
Our Price: $333.00

Foredom TXMH Bench Motor with Heavy Duty Shafting and Built-in Dial Control, 115 Volt

Foredom M.TXMH Bench Motor with Heavy Duty Shafting and Built-in Dial Control, 115 Volt. Bench motor with heavy duty square drive shaft and protective sheath and built-in dial control in cast iron base. Here a bench style version of higher torque flex shaft Series TXH motor has an integrated dial speed control built into its cast-iron base for manual speed adjustment and easy placement anywhere on the workbench. It comes equipped with a longer square drive shaft and heavy duty protective sheath. M.TXMH Motor Description: This heavy duty model has exactly the same motor specifications as the M.TXM. Series TXM motors are Foredom s most powerful flex shaft machines with 1/3HP. They have permanent magnet DC motors that feature the latest in flex shaft technology. These ball bearing models utilize advanced rare earth magnets (in place of the wound fields in our universal type Series SR motors) that deliver more torque at the low end and throughout the entire speed range of 500 to 15,000 RPM. Heavy duty flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones.This model comes equipped with a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's three square drive handpieces- the H.25H, H.30H and H.44HT. Two year warranty on 1/3 HP Series TXMH Motors and Controls. M.TXMH motors are available ONLY in 115 Volt. Built-in Speed Control Description: The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.TXMH Manufacturer : Foredom