SR Series 1/6 HP



  Foredom SR Hang-Up Motor with EM-1 Dial Speed Control, 115 Volt

Retail Price: $274.00
You save: $27.40  (10%)
Our Price: $246.60

Foredom SR Hang-Up Motor with EM-1 Dial Speed Control, 115 Volt

Foredom M.SR Hang-Up Motor with C.EM-1 Dial Speed Control, 115 Volt. Hang-up motor with key tip shaft and protective sheath plus dial control in plastic housing. Here our most popular flex shaft model, the M.SR hang-up style motor, is teamed up with the C.EM-1 table top dial speed control in plastic housing. M.SR Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SR combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. It comes equipped with a motor bale for hanging, and our standard 39" long key-tip inner shaft and outer sheath for connecting to any of Foredom s 20+ interchangeable, quick disconnect handpieces. C.EM-1 Speed Control Description: The C.EM-1 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit. The C.EM-1 also has a replaceable fuse that protects the electronics during power surges and work overloads. 5" long, 5-3 4" wide, 2-5 8" high, ship wt- 2 lbs./1 kg. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls. M.SR motors are available in both 115 Volt and 230 Volt. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.SR-EM Manufacturer : Foredom
  Foredom SR Hang-Up Motor with FCT-1 Foot Control, 115 Volt

Retail Price: $240.00
You save: $24.00  (10%)
Our Price: $216.00

Foredom SR Hang-Up Motor with FCT-1 Foot Control, 115 Volt

Hang-up motor with key tip shaft and protective sheath plus foot control in plastic housing.  Here our most popular flex shaft model, the M.SR hang-up style motor, is teamed up with the C.FCT-1 foot operated speed control in plastic housing. CSA listed. M.SR Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SR combines the most important features our customers expect–power, reversibility, reliability, and versatility– all into one motor. It comes equipped with a motor bale for hanging, and our standard 39" long key-tip inner shaft and outer sheath for connecting to any of Foredom’s 20+ interchangeable, quick disconnect handpieces. C.FCT-1 Speed Control Description:  The reliable C.FCT-1 is Foredom’s most popular speed control. It features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. It provides smooth control throughout the entire speed range. CSA listed. 7" long, 4-1⁄2" wide, 2-3⁄8" high,  ship wt– 2 lbs./1 kg. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls.  M.SR motors are available in both 115 Volt and 230 Volt. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.  Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.SR-FCT Manufacturer : Foredom
  Foredom SR Hang-Up Motor with SCT-1 Foot Control, 115 Volt

Retail Price: $274.00
You save: $27.40  (10%)
Our Price: $246.60

Foredom SR Hang-Up Motor with SCT-1 Foot Control, 115 Volt

Foredom M.SR Hang-Up Motor with C.SCT-1 Foot Control, 115 Volt. Hang-up motor with key tip shaft and protective sheath plus foot control in metal housing. Here our most popular flex shaft model, the M.SR hang-up style motor, is teamed up with the C.SCT-1 foot operated speed control in metal housing. CSA listed. M.SR Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SR combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and outer sheath for connecting to any of Foredom s 20+ interchangeable, quick disconnect handpieces. C.SCT-1 Speed Control Description: The C.SCT-1 offers the same electronics and smooth control as the C.FCT-1 but in a much heavier, cast iron housing. The added weight eliminates any unexpected movement of the control along the floor. The bottom surface of the speed control is covered with non-skid material. CSA listed. 6-3 4" long, 4" wide, 2-3 8" high, ship wt- 6 lbs./2.7 kg. Motor Details: The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls. M.SR motors are available in both 115 Volt and 230 Volt. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.SR-SCT Manufacturer : Foredom
  Foredom SRB Bench Motor with EM-1 Dial Control, 115 Volt

Retail Price: $304.00
You save: $30.40  (10%)
Our Price: $273.60

Foredom SRB Bench Motor with EM-1 Dial Control, 115 Volt

Foredom M.SRB Bench Motor with C.EM-1 Dial Control, 115 Volt. Bench motor with key tip shaft and protective sheath plus dial control in plastic housing. Here a bench style version of Foredom's 1/6 HP Series SR motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.EM-1 table top dial speed control in plastic housing. M.SRB Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SRB combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. It comes equipped with our standard 39" long key tip inner shaft and outer sheath for connecting to any of Foredom s 20+ interchangeable, quick disconnect handpieces. C.EM-1 Speed Control Description: This table top speed control is constructed of heavy duty plastic with durable solid state electronics. It has a dial control for precise speed settings, as well as good repeatability of previous settings. For use with 115 Volt Series SR, SRB, SRH and SRBH motors. 5" long, 5-3/4" wide, 2-5/8" high, ship wt-2 lbs./1 kg. It is interchangeable with Foredom's C.FCT-1 and C.SCT-1 controls. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls. M.SRB motors are available in both 115 Volt and 230 Volt. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.SRB-EM-1 Manufacturer : Foredom
  Foredom SRB Bench Motor with FCT-1 Foot Control, 115 Volt

Retail Price: $270.00
You save: $27.00  (10%)
Our Price: $243.00

Foredom SRB Bench Motor with FCT-1 Foot Control, 115 Volt

Foredom M.SRB Bench Motor with C.FCT-1 Foot Control, 115 Volt. Bench motor with key tip shaft and protective sheath plus foot control in plastic housing.
Model : M.SRB-FCT Manufacturer : Foredom
  Foredom SRB Bench Motor with SCT-1 Foot Control, 115 Volt

Retail Price: $304.00
You save: $30.40  (10%)
Our Price: $273.60

Foredom SRB Bench Motor with SCT-1 Foot Control, 115 Volt

Foredom M.SRB Bench Motor with C.SCT-1 Foot Control, 115 Volt. Bench motor with key tip shaft and protective sheath plus foot control in metal housing. Here a bench style version of Foredom's 1/6 HP Series SR motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.SCT-1 foot operated speed control in metal housing. CSA listed. M.SRB Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. It comes equipped with an inner shaft, outer sheath, and motor bale (for hanging up). The M.SRB combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. It comes equipped with our standard 39" long key tip inner shaft and outer sheath for connecting to any of Foredom s 20+ interchangeable, quick disconnect handpieces. C.SCT-1 Speed Control Description: The C.SCT-1 offers the same electronics and smooth control as the C.FCT-1 but in a much heavier, cast iron housing. The added weight eliminates any unexpected movement of the control along the floor. The bottom surface of the speed control is covered with non-skid material. CSA listed. 6-3 4" long, 4" wide, 2-3 8" high, ship wt- 6 lbs./2.7 kg. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls. M.SRB motors are available in both 115 Volt and 230 Volt. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.SRB-SCT Manufacturer : Foredom
  Foredom SRM Bench Motor with Built-in Dial Control, 115 Volt

Retail Price: $279.00
You save: $27.90  (10%)
Our Price: $251.10

Foredom SRM Bench Motor with Built-in Dial Control, 115 Volt

Foredom M.SRM Bench Motor with Built-in Dial Control, 115 Volt. Bench motor with built-in dial speed control in cast iron base. Here a bench style version of Foredom's 1/6 HP Series SR motor has an integrated dial speed control built into its cast-iron base for manual speed adjustment and easy placement anywhere on the workbench. M.SRM Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SRM combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. It comes equipped with our standard 39" long key tip inner shaft and outer sheath for connecting to any of Foredom s 20+ interchangeable, quick disconnect handpieces. Built-in Speed Control Description: The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls. M.SRM motors are available in both 115 Volt and 230 Volt. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.SRM Manufacturer : Foredom
  Foredom SRBH Bench Motor with Heavy Duty Shaft & Sheath and FCT-1 Foot Control, 115 Volt

Retail Price: $295.00
You save: $29.50  (10%)
Our Price: $265.50

Foredom SRBH Bench Motor with Heavy Duty Shaft & Sheath and FCT-1 Foot Control, 115 Volt

Foredom M.SRBH Bench Motor with Heavy Duty Shaft Sheath and C.FCT-1 Foot Control, 115 Volt. Bench motor with heavy duty square drive shaft and protective sheath plus foot control in plastic housing. Here a bench style version of Foredom's 1/6 HP Series SRH motor comes mounted in a cast-iron base and equipped with a longer square drive shaft and heavy duty protective sheath. Bench style motors are designed for easy placement anywhere on the workbench. It is teamed up with the C.FCT-1 foot operated speed control in plastic housing. CSA listed. M.SRBH Motor Description: This heavy duty model has exactly the same motor specifications as the M.SRB. Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. It combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. This model comes equipped with a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's four square drive handpieces- the H.25H, H.30H, H.44HT and new H.28H. Heavy duty flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones. C.FCT-1 Speed Control Description: The reliable C.FCT-1 is Foredom s most popular speed control. It features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. It provides smooth control throughout the entire speed range. CSA listed. 7" long, 4-1 2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg. Motor Details:The 1/6 hp, ball bearing Series SRBH has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SRBH Motors and Controls. M.SRBH motors are available in both 115 Volt and 230 Volt. Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's three square drive handpieces - the H.25H, H.30, H.44HT and H.28H.
Model : M.SRBH-FCT Manufacturer : Foredom
  Foredom SRBH Bench Motor with Heavy Duty Shafting and EM-1 Dial Control, 115 Volt

Retail Price: $329.00
You save: $32.90  (10%)
Our Price: $296.10

Foredom SRBH Bench Motor with Heavy Duty Shafting and EM-1 Dial Control, 115 Volt

Foredom M.SRBH Bench Motor with Heavy Duty Shafting and C.EM-1 Dial Control, 115 Volt. Bench motor with heavy duty square drive shaft and protective sheath plus dial control in plastic housing. Here a bench style version of Foredom's 1/6 HP Series SRH motor comes mounted in a cast-iron base and equipped with a longer square drive shaft and heavy duty protective sheath. Bench style motors are designed for easy placement anywhere on the workbench. It is teamed up with the C.EM-1 table top dial speed control in plastic housing. M.SRBH Motor Description: This heavy duty model has exactly the same motor specifications as the M.SRB. Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. It combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. This model comes equipped with a motor bale for hanging, and a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's four square drive handpieces- the H.25H, H.30H, H.44HT and new H.28H. Heavy duty flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones. C.EM-1 Speed Control Description: The C.EM-1 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EM-1 also has a replaceable fuse that protects the electronics during power surges and work overloads. 5" long, 5-3 4" wide, 2-5 8" high, ship wt- 2 lbs./1 kg. Motor Details:The 1/6 hp, ball bearing Series SRBH has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SRBH Motors and Controls. M.SRBH motors are available in both 115 Volt and 230 Volt.Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's four square drive handpieces - the H.25H, H.30H, H.44HT and H.28H.
Model : M.SRBH-EM Manufacturer : Foredom
  Foredom SRBH Bench Motor with Heavy Duty Shafting and SCT-1 Foot Control, 115 Volt

Retail Price: $329.00
You save: $32.90  (10%)
Our Price: $296.10

Foredom SRBH Bench Motor with Heavy Duty Shafting and SCT-1 Foot Control, 115 Volt

M.SRBH Bench Motor with Heavy Duty Shafting and C.SCT-1 Foot Control, 115 Volt. Bench motor with heavy duty square drive shaft and protective sheath plus foot control in metal housing. Here a bench style version of Foredom's 1/6 HP Series SRH motor comes mounted in a cast-iron base and equipped with a longer square drive shaft and heavy duty protective sheath. Bench style motors are designed for easy placement anywhere on the workbench. It is teamed up with the C.SCT-1 foot operated speed control in metal housing. CSA listed.M.SRBH Motor Description: This heavy duty model has exactly the same motor specifications as the M.SRB. Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. It combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. This model comes equipped with a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's four square drive handpieces- the H.25H, H.30H, H.44HT and new H.28H. Heavy duty flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones. C.SCT-1 Speed Control Description: The C.SCT-1 offers the same electronics and smooth control as the C.FCT-1 but in a much heavier, cast iron housing. The added weight eliminates any unexpected movement of the control along the floor. The bottom surface of the speed control is covered with non-skid material. CSA listed. 6-3 4" long, 4" wide, 2-3 8" high, ship wt- 6 lbs./2.7 kg. Motor Details:The 1/6 hp, ball bearing Series SRBH has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SRBH Motors and Controls. M.SRBH motors are available in both 115 Volt and 230 Volt.Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's four square drive handpieces - the H.25H, H.30H, H.44HT and H.28H.
Model : M.SRBH-SCT Manufacturer : Foredom
  Foredom SRH Hang-Up Motor with Heavy Duty Shafting and EM-1 Dial Control, 115 Volt

Retail Price: $299.00
You save: $29.90  (10%)
Our Price: $269.10

Foredom SRH Hang-Up Motor with Heavy Duty Shafting and EM-1 Dial Control, 115 Volt

Foredom M.SRH Hang-Up Motor with Heavy Duty Shafting and C.EM-1 Dial Control, 115 Volt. Hang-up motor with heavy duty square drive shaft and protective sheath plus dial control in plastic housing. Here Foredom's most popular flex shaft motor comes equipped with a longer square drive shaft and heavy duty protective sheath. It is teamed up with the C.EM-1 table top dial speed control in plastic housing. M.SRH Motor Description: This heavy duty model has exactly the same motor specifications as the M.SR. Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. It combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. This model comes equipped with a motor bale for hanging, and a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's four square drive handpieces- the H.25H, H.30H, H.44HT and new H.28H. Heavy duty flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones. C.EM-1 Speed Control Description: The C.EM-1 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EM-1 also has a replaceable fuse that protects the electronics during power surges and work overloads. 5" long, 5-3 4" wide, 2-5 8" high, ship wt- 2 lbs./1 kg. Motor Details:The 1/6 hp, ball bearing Series SRH has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SRH Motors and Controls. M.SRH motors are available in both 115 Volt and 230 Volt. Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's four square drive handpieces - the H.25H, H.30H, H.44HT and H.28H. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.SRH-EM Manufacturer : Foredom
  Foredom SRH Hang-Up Motor with Heavy Duty Shafting and FCT-1 Foot Control, 115 Volt

Retail Price: $265.00
You save: $26.50  (10%)
Our Price: $238.50

Foredom SRH Hang-Up Motor with Heavy Duty Shafting and FCT-1 Foot Control, 115 Volt

Hang-up motor with heavy duty square drive shaft and protective sheath plus foot control in plastic housing.  Here our most popular flex shaft model, the M.SR hang-up style motor, is equipped with a longer square drive shaft and heavy duty protective sheath. It is teamed up with the C.FCT-1 foot operated speed control in plastic housing. CSA listed. M.SRH Motor Description: This heavy duty model has exactly the same motor specifications as the M.SR. Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. It combines the most important features our customers expect–power, reversibility, reliability, and versatility– all into one motor. This model comes equipped with a motor bale for hanging, and a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's four square drive handpieces- the H.25H, H.30H, H.44HT and new H.28H. Heavy duty flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones. C.FCT-1 Speed Control Description:  The reliable C.FCT-1 is Foredom’s most popular speed control. It features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. It provides smooth control throughout the entire speed range. CSA listed. 7" long, 4-1⁄2" wide, 2-3⁄8" high,  ship wt– 2 lbs./1 kg. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls.  M.SRH motors are available in both 115 Volt and 230 Volt. Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's four square drive handpieces - the H.25H, H.30H, H.44HT and H.28H. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.SRH-FCT Manufacturer : Foredom
  Foredom SRH Hang-Up Motor with Heavy Duty Shafting and SCT-1 Foot Control, 115 Volt

Retail Price: $299.00
You save: $29.90  (10%)
Our Price: $269.10

Foredom SRH Hang-Up Motor with Heavy Duty Shafting and SCT-1 Foot Control, 115 Volt

Foredom M.SRH Hang-Up Motor with Heavy Duty Shafting and C.SCT-1 Foot Control, 115 Volt. Hang-up motor with heavy duty square drive shaft and protective sheath plus foot control in metal housing. Here our most popular flex shaft model, the M.SR hang-up style motor, is equipped with a longer square drive shaft and heavy duty protective sheath. It is teamed up with the C.SCT-1 foot operated speed control in heavy duty cast iron housing. CSA listed. M.SRH Motor Description: This heavy duty model has exactly the same motor specifications as the M.SR. Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. It combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. This model comes equipped with a motor bale for hanging, and a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's four square drive handpieces- the H.25H, H.30H, H.44HT and new H.28H. Heavy duty flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones. C.SCT-1 Speed Control Description: The C.SCT-1 offers the same electronics and smooth control as the C.FCT-1 but in a much heavier, cast iron housing. The added weight eliminates any unexpected movement of the control along the floor. The bottom surface of the speed control is covered with non-skid material. CSA listed. 6-3 4" long, 4" wide, 2-3 8" high, ship wt- 6 lbs./2.7 kg. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls. M.SRH motors are available in both 115 Volt and 230 Volt. Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's four square drive handpieces - the H.25H, H.30H, H.44HT and H.28H. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.SRH-SCT Manufacturer : Foredom
  Foredom SRMH Bench Motor with Heavy Duty Shafting and Built-in Dial Control, 115 Volt

Retail Price: $304.00
You save: $30.40  (10%)
Our Price: $273.60

Foredom SRMH Bench Motor with Heavy Duty Shafting and Built-in Dial Control, 115 Volt

Foredom M.SRMH Bench Motor with Heavy Duty Shafting and Built-in Dial Control, 115 Volt. Bench motor with heavy duty square drive shaft and protective sheath and built-in dial control in cast iron base. Here a bench style version of Foredom's 1/6 HP M.SR motor has an integrated dial speed control mounted in a cast-iron base for manual speed adjustment and easy placement anywhere on the workbench. It also comes equipped with a longer square drive shaft and heavy duty protective sheath. M.SRMH Motor Description: This heavy duty model has exactly the same motor specifications as the M.SR. Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. It combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. This model comes equipped with a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's four square drive handpieces- the H.25H, H.30H, H.44HT and new H.28H. Heavy duty flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones. Built-in Speed Control Description: The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SRMH Motors and Controls. M.SRMH motors are available in both 115 Volt and 230 Volt.Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's four square drive handpieces - the H.25H, H.30H, H.44HT and H.28H. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.SRMH Manufacturer : Foredom