International Models-230V



  Foredom LX Hang-Up Motor with EMX-2 Dial Control, 230 Volt

Retail Price: $315.00
You save: $31.50  (10%)
Our Price: $283.50

Foredom LX Hang-Up Motor with EMX-2 Dial Control, 230 Volt

Foredom M.LX Hang-Up Motor with C.EMX-2 Dial Control, 230 Volt. Hang-up motor with key tip shaft and protective sheath plus dial control in plastic housing. Here our high torque/low speed flex shaft model, the M.LX hang-up style motor, is teamed up with the C.EMX-2 table top dial speed control in plastic housing. This is a 230 Volt motor-control combination. M.LX Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LX Motors and Controls. M.LX motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors in 230 volt require the use of a TXR-2, SXR-2, or EMX-2 speed control. Damage will result if the motor is connected to any other speed control. C.EMX-2 Speed Control Description: The C.EMX-2 looks the same as our standard table top control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.EMX-2 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EMX-2 also has a replaceable fuse that protects the electronics during power surges and work overloads. For use with 230 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors5" long, 5-3 4" wide, 2-5 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.LX-EMX-2CP Manufacturer : Foredom
  Foredom LX Hang-Up Motor with SXR-2 Foot Control, 230 Volt

Retail Price: $315.00
You save: $31.50  (10%)
Our Price: $283.50

Foredom LX Hang-Up Motor with SXR-2 Foot Control, 230 Volt

Foredom M.LX Hang-Up Motor with C.SXR-2 Foot Control, 230 Volt. Hang-up motor with key tip shaft and protective sheath plus foot control in metal housing. Here our high torque/low speed flex shaft model, the M.LX hang-up style motor, is teamed up with the C.SXR-2 foot operated speed control in metal housing. This is a 230 Volt motor-control combination. M.LX Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LX Motors and Controls. M.LX motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors in 230 volt require the use of a TXR-2, SXR-2, or EMX-2 speed control. Damage will result if the motor is connected to any other speed control. C.SXR-2 Speed Control Description: This foot operated speed control comes in a metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.TX2. The ergonomics allow precise and reliable speed control with your foot. The C.SXR-2 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a special plug that fits the motor's shielded plug.For use with 230 Volt M.LX, M.LXB, M.LXH and M.LXBH motors. 6-3/4" long, 4" wide, 2-3/8" high, ship wt-6 lbs./2.7 kg.It is interchangeable with Foredom's C.TXR-2 and C.EMX-2 controls. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.LX-SXR-2CP Manufacturer : Foredom
  Foredom LX Hang-Up Motor with TXR-2 Foot Control, 230 Volt

Retail Price: $285.00
You save: $28.50  (10%)
Our Price: $256.50

Foredom LX Hang-Up Motor with TXR-2 Foot Control, 230 Volt

Foredom M.LX Hang-Up Motor with C.TXR-2 Foot Control, 230 Volt. Hang-up motor with key tip shaft and protective sheath plus foot control in plastic housing. Here our high torque/low speed flex shaft model, the M.LX hang-up style motor, is teamed up with the C.TXR-2 foot operated speed control in plastic housing. This is a 230 Volt motor-control combination. M.LX Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LX Motors and Controls. M.LX motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors in 230 volt require the use of a TXR-2, SXR-2, or EMX-2 speed control. Damage will result if the motor is connected to any other speed control. C.TXR-2 Speed Control Description: The C.TXR-2 looks the same as our standard speed control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.TXR-2 is made of heavy-duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot. For use with 230 Volt M.LX, M.LXB, M.LXH and M.LXBH motors.7" long, 4-1/2" wide, 2-3/8" high, ship wt-2 lbs./1 kg. It is interchangeable with Foredom's C.SXR-2 and C.EMX-2 controls. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.LX-TXR-2CP Manufacturer : Foredom
  Foredom LXB Bench Motor with EMX-2 Dial Control, 230 Volt

Retail Price: $345.00
You save: $34.50  (10%)
Our Price: $310.50

Foredom LXB Bench Motor with EMX-2 Dial Control, 230 Volt

Foredom M.LXB Bench Motor with C.EMX-2 Dial Control, 230 Volt. Bench motor with key tip shaft and protective sheath plus dial control in plastic housing. Here a bench style version of Foredom's High Torque/Low Speed Series LX motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.EMX-2 table top dial speed control in plastic housing. This is a 230 Volt motor-control combination. M.LXB Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LXB Motors and Controls. M.LXB motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors in 230 volt require the use of a TXR-2, SXR-2, or EMX-2 speed control. Damage will result if the motor is connected to any other speed control. C.EMX-2 Speed Control Description: The C.EMX-2 looks the same as our standard table top control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.EMX-2 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EMX-2 also has a replaceable fuse that protects the electronics during power surges and work overloads. For use with 230 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors5" long, 5-3 4" wide, 2-5 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.LXB-EMX-2CP Manufacturer : Foredom
  Foredom LXB Bench Motor with SXR-2 Foot Control, 230 Volt

Retail Price: $345.00
You save: $34.50  (10%)
Our Price: $310.50

Foredom LXB Bench Motor with SXR-2 Foot Control, 230 Volt

Foredom M.LXB Bench Motor with C.SXR-2 Foot Control, 230 Volt. Bench motor with key tip shaft and protective sheath plus foot control in metal housing. Here a bench style version of Foredom's High Torque/Low Speed Series LX motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.SXR-2 foot operated speed control in plastic housing. This is a 230 Volt motor-control combination. M.LXB Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LXB Motors and Controls. M.LXB motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors in 230 volt require the use of a TXR-2, SXR-2, or EMX-2 speed control. Damage will result if the motor is connected to any other speed control. C.SXR-2 Speed Control Description: This foot operated speed control comes in a metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.TX2. The ergonomics allow precise and reliable speed control with your foot. The C.SXR-2 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a special plug that fits the motor's shielded plug.For use with 230 Volt M.LX, M.LXB, M.LXH and M.LXBH motors. 6-3/4" long, 4" wide, 2-3/8" high, ship wt-6 lbs./2.7 kg.It is interchangeable with Foredom's C.TXR-2 and C.EMX-2 controls. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.LXB-SXR-2CP Manufacturer : Foredom
  Foredom LXB Bench Motor with TXR-2 Foot Control, 230 Volt

Retail Price: $315.00
You save: $31.50  (10%)
Our Price: $283.50

Foredom LXB Bench Motor with TXR-2 Foot Control, 230 Volt

Foredom M.LXB Bench Motor with C.TXR-2 Foot Control, 230 Volt. Bench motor with key tip shaft and protective sheath plus foot control in plastic housing. Here a bench style version of Foredom's High Torque/Low Speed Series LX motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.TXR-2 foot operated speed control in plastic housing. This is a 230 Volt motor-control combination. M.LXB Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LXB Motors and Controls. M.LXB motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors in 230 volt require the use of a TXR-2, SXR-2, or EMX-2 speed control. Damage will result if the motor is connected to any other speed control. C.TXR-2 Speed Control Description: The C.TXR-2 looks the same as our standard speed control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.TXR-2 is made of heavy-duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot. For use with 230 Volt M.LX, M.LXB, M.LXH and M.LXBH motors.7" long, 4-1/2" wide, 2-3/8" high, ship wt-2 lbs./1 kg. It is interchangeable with Foredom's C.SXR-2 and C.EMX-2 controls. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.LXB-TXR-2CP Manufacturer : Foredom
  Foredom LXM Bench Motor with Built-in Dial Control, 230 Volt

Retail Price: $320.00
You save: $32.00  (10%)
Our Price: $288.00

Foredom LXM Bench Motor with Built-in Dial Control, 230 Volt

Foredom M.LXM Bench Motor with Built-in Dial Control, 230 Volt. Bench motor with built-in dial control in cast iron base and key tip shaft and protective sheath. Here a bench style version of Foredom's High Torque/Low Speed Series LX motor has an integrated dial speed control built into its cast-iron base for manual speed adjustment and easy placement anywhere on the workbench. This is a 230 Volt motor. M.LXM Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Built-in Speed Control Description: The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit. Two year warranty on High Torque/Low Speed Series LXM Motors and Controls. M.LXM motors are available in 115 Volt and 230 Volt. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.LXM-2CP Manufacturer : Foredom
  Foredom SR CE Hang-Up Motor with FCT-2CE Foot Control, 230 Volt

Retail Price: $275.00
You save: $27.50  (10%)
Our Price: $247.50

Foredom SR CE Hang-Up Motor with FCT-2CE Foot Control, 230 Volt

Foredom M.SR CE Hang-Up Motor with C.FCT-2CE Foot Control, 230 Volt. CE compliant motor-control combination. Hang-up motor with shaft and protective sheath plus foot control. Here our most popular flex shaft model, the M.SR hang-up style motor is teamed up with the C.FCT2CE foot operated speed control in plastic housing. This motor and speed combination is CE compliant and meets all electrical and safety requirements.. M.SR Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SR combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. It comes equipped with a motor bale for hanging, and our standard 39" long key-tip inner shaft and outer sheath for connecting to any of Foredom s 20+ "quick disconnect" handpieces.C.FCT-2CE Speed Control Description: This speed control features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. It provides smooth control throughout the entire speed range. CE compliant. Available with different power cord plug options, please select from the drop down menu above: UK plug with internal fuse (CP Option 21), Continental European with 2 prongs and grounding hole (CP Option 22), or Australian with 3 prongs (CP Option 26).7" long, 4-1 2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SRJ CE Motors and Controls. M.SR motors are available in both 115 Volt and 230 Volt.Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.SR-FCT2CE-CP Manufacturer : Foredom
  Foredom SR Hang-Up Motor with EMH-2 Foot Control, 230 Volt

Retail Price: $274.00
You save: $27.40  (10%)
Our Price: $246.60

Foredom SR Hang-Up Motor with EMH-2 Foot Control, 230 Volt

Foredom M.SR Hang-Up Motor with C.EMH-2 Foot Control, 230 Volt. Hang-up motor with key tip shaft and protective sheath plus plus dial control in plastic housing. Here our most popular flex shaft model, the M.SR hang-up style motor, is teamed up with the C.EMH-2 table top dial speed control in plastic housing. This is a 230 Volt motor-control combination. M.SR Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SR combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. It comes equipped with a motor bale for hanging, and our standard 39" long key-tip inner shaft and outer sheath for connecting to any of Foredom s 20+ interchangeable, quick disconnect handpieces. C.EMH-2 Speed Control Description: This table top speed control is constructed of heavy-duty plastic with durable solid state electronics. It has a dial control for precise speed settings, as well as good repeatability of previous settings. For use with 230 Volt Series M.SR, M.SRB, M.SRH and M.SRBH motors. It is interchangeable with Foredom's C.FCH-2 and C.SCH-2 controls. Can also be used with discontinued 230 volt Series H and HB motors. Comes with standard 3-prong US style plug unless specified. Please select your power cord preference from the drop down menu above: UK plug with internal fuse (CP Option 21), Continental European with 2 prongs and grounding hole (CP Option 22), or Australian with 3 prongs (CP Option 26). 5" long, 5-3/4" wide, 2-5/8" high, ship wt-2 lbs./1 kg. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls. M.SR motors are available in both 115 Volt and 230 Volt.Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.SR-EMH-2 Manufacturer : Foredom
  Foredom SR Hang-Up Motor with FCH-2 Foot Control, 230 Volt

Retail Price: $240.00
You save: $24.00  (10%)
Our Price: $216.00

Foredom SR Hang-Up Motor with FCH-2 Foot Control, 230 Volt

Foredom M.SR Hang-Up Motor with C.FCH-2 Foot Control, 230 Volt. Hang-up motor with key tip shaft and protective sheath plus foot control in plastic housing. Here our most popular flex shaft model, the M.SR hang-up style motor, is teamed up with the C.FCH-2 foot operated speed control in plastic housing. This is a 230 Volt motor-control combination. M.SR Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SR combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. It comes equipped with a motor bale for hanging, and our standard 39" long key-tip inner shaft and outer sheath for connecting to any of Foredom s 20+ interchangeable, quick disconnect handpieces. C.FCH-2 Speed Control Description: The reliable C.FCH-2 is a 230 volt version of Foredom s most popular speed control. It features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. It provides smooth control throughout the entire speed range. Comes with standard 3-prong US style plug unless specified. Please select your power cord preference from the drop down menu above: UK plug with internal fuse (CP Option 21), Continental European with 2 prongs and grounding hole (CP Option 22), or Australian with 3 prongs (CP Option 26). 7" long, 4-1 2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls. M.SR motors are available in both 115 Volt and 230 Volt.Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.SR-FCH-2 Manufacturer : Foredom
  Foredom SR Hang-Up Motor with SCH-2 Foot Control, 230 Volt

Retail Price: $274.00
You save: $27.40  (10%)
Our Price: $246.60

Foredom SR Hang-Up Motor with SCH-2 Foot Control, 230 Volt

Foredom M.SR Hang-Up Motor with C.SCH-2 Foot Control, 230 Volt. Hang-up motor with key tip shaft and protective sheath plus foot control in metal housing. Here our most popular flex shaft model, the M.SR hang-up style motor, is teamed up with the C.SCH-2 foot operated speed control in metal housing. This is a 230 Volt motor-control combination. M.SR Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SR combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. It comes equipped with a motor bale for hanging, and our standard 39" long key-tip inner shaft and outer sheath for connecting to any of Foredom s 20+ interchangeable, quick disconnect handpieces. C.FCH-2 Speed Control Description: The C.SCH-2 comes in a metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.FCH-2. The ergonomics allow precise and reliable speed control with your foot. For use with 230 Volt Series SR, SRB, SRH and SRBH motors. It is interchangeable with Foredom's C.FCH-2 and C.EMH-2 controls. Can also be used with discontinued 230 volt Series H and HB motors. Comes with standard 3-prong US style plug unless specified. Please select your power cord preference from the drop down menu above: UK plug with internal fuse (CP Option 21), Continental European with 2 prongs and grounding hole (CP Option 22), or Australian with 3 prongs (CP Option 26). 6-3/4" long, 4" wide, 2-3/8" high, ship wt-6 lbs./2.7 kg. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls. M.SR motors are available in both 115 Volt and 230 Volt.Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.SR-SCH-2 Manufacturer : Foredom
  Foredom SRB Bench Motor with EMH-2 Dial Control, 230 Volt

Retail Price: $304.00
You save: $30.40  (10%)
Our Price: $273.60

Foredom SRB Bench Motor with EMH-2 Dial Control, 230 Volt

Foredom M.SRB Bench Motor with C.EMH-2 Dial Control, 230 Volt. Bench motor with key tip shaft and protective sheath plus dial control in plastic housing. Here a bench style version of Foredom's 1/6 HP Series SR motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.EMH-2 table top dial speed control in plastic housing. This is a 230 Volt motor-control combination. M.SRB Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SRB combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. It comes equipped with our standard 39" long key-tip inner shaft and outer sheath for connecting to any of Foredom s 20+ interchangeable, quick disconnect handpieces. C.EMH-2 Speed Control Description: This table top speed control is constructed of heavy duty plastic with durable solid state electronics. It has a dial control for precise speed settings, as well as good repeatability of previous settings. For use with 230 Volt Series SR, SRB, SRH and SRBH motors. 5" long, 5-3/4" wide, 2-5/8" high, ship wt-2 lbs./1 kg. It is interchangeable with Foredom's C.FCH-2 and C.SCH-2 controls. Can also be used with discontinued 230 volt Series H and HB motors. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls. M.SRB motors are available in both 115 Volt and 230 Volt.Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.SRB-EMH-2CP Manufacturer : Foredom
  Foredom SRB Bench Motor with FCH-2 Foot Control, 230 Volt

Retail Price: $270.00
You save: $27.00  (10%)
Our Price: $243.00

Foredom SRB Bench Motor with FCH-2 Foot Control, 230 Volt

Foredom M.SRB Bench Motor with C.FCH-2 Foot Control, 230 Volt. Bench motor with key tip shaft and protective sheath plus foot control in plastic housing. Here a bench style version of Foredom's 1/6 HP Series SR motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.FCH-2 foot operated speed control in plastic housing. This is a 230 Volt motor. M.SRB Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SRB combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. It comes equipped with our standard 39" long key-tip inner shaft and outer sheath for connecting to any of Foredom s 20+ interchangeable, quick disconnect handpieces. C.FCH-2 Speed Control Description: The reliable C.FCH-2 is a 230 volt version of Foredom s most popular speed control. It features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. It provides smooth control throughout the entire speed range. 7" long, 4-1 2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls. M.SRB motors are available in both 115 Volt and 230 Volt.Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.SRB-FCH-2 Manufacturer : Foredom
  Foredom SRB Bench Motor with SCH-2 Foot Control, 230 Volt

Retail Price: $295.00
You save: $59.00  (20%)
Our Price: $236.00

Foredom SRB Bench Motor with SCH-2 Foot Control, 230 Volt

Foredom M.SRB Bench Motor with C.SCH-2 Foot Control, 230 Volt. Bench motor with key tip shaft and protective sheath plus foot control in metal housing. Here a bench style version of Foredom's 1/6 HP Series SR motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.SCH-2 foot operated speed control in metal housing. This is a 230 Volt motor. M.SRB Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SRB combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. It comes equipped with our standard 39" long key tip inner shaft and outer sheath for connecting to any of Foredom s 20+ interchangeable, quick disconnect handpieces. Speed Control Description: The C.SCH-2 comes in a metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.FCH-2. The ergonomics allow precise and reliable speed control with your foot. For use with 230 Volt Series SR, SRB, SRH and SRBH motors. 6-3/4" long, 4" wide, 2-3/8" high, ship wt-6 lbs./2.7 kg. It is interchangeable with Foredom's C.FCH-2 and C.EMH-2 controls. Can also be used with discontinued 230 volt Series H and HB motors. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls. M.SRB motors are available in both 115 Volt and 230 Volt.Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.SRB-SCH-2 Manufacturer : Foredom
  Foredom SRH CE Hang-Up Motor with FCT-2CE Foot Control, 230 Volt

Retail Price: $300.00
You save: $30.00  (10%)
Our Price: $270.00

Foredom SRH CE Hang-Up Motor with FCT-2CE Foot Control, 230 Volt

Foredom M.SRH CE Hang-Up Motor with C.FCT-2CE Foot Control, 230 Volt. CE compliant motor-control combination. Hang-up motor with heavy duty shaft and protective sheath plus foot control. Here our most popular flex shaft model, the M.SR hang-up style motor, comes equipped with a heavy duty square drive shaft and protective sheath for use ONLY with Foredom's 3 square drive handpieces. It is teamed up with the C.FCT2CE foot operated speed control in plastic housing. This motor and speed combination is CE compliant and meets all electrical and safety requirements. M.SRH CE Motor Description: This heavy duty model has exactly the same motor specifications as the M.SR. Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. It combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. This model comes equipped with a motor bale for hanging, and a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's four square drive handpieces- the H.25H, H.30H, H.44HT and H.28H. Heavy duty flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones. C.FCT-2CE Speed Control Description: This speed control features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. It provides smooth control throughout the entire speed range. CE compliant. Available with different power cord plug options, please select from the drop down menu above: UK plug with internal fuse (CP Option 21), Continental European with 2 prongs and grounding hole (CP Option 22), or Australian with 3 prongs (CP Option 26).7" long, 4-1 2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SRH CE Motors and Controls. M.SRH CE motors are available in both 115 Volt and 230 Volt.Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's four square drive handpieces - the H.25H, H.30H, H.44HT and H.28H. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.SRH-FCT2CE-CP Manufacturer : Foredom
  Foredom SRH Hang-Up Motor with Heavy Duty Shafting and FCH-2 Foot Control, 230 Volt

Retail Price: $265.00
You save: $26.50  (10%)
Our Price: $238.50

Foredom SRH Hang-Up Motor with Heavy Duty Shafting and FCH-2 Foot Control, 230 Volt

Foredom M.SRH Hang-Up Motor with Heavy Duty Shafting and C.FCH-2 Foot Control, 230 Volt. Hang-up motor with heavy duty square drive shafting plus foot control in plastic housing. Here our most popular flex shaft model, the M.SR hang-up style motor, is equipped with a longer square drive shaft and heavy duty protective sheath. It is teamed up with the C.FCH-2 foot operated speed control in plastic housing. This is a 230 Volt motor-control combination. M.SRH Motor Description: This heavy duty model has exactly the same motor specifications as the M.SR. Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. It combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. This model comes equipped with a motor bale for hanging, and a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's four square drive handpieces- the H.25H, H.30H, H.44HT and new H.28H. Heavy duty flex shafts are the ultimate power tools for deburring, buffing, grinding, polishing and metal finishing of any kind with larger rotary accessories. They are great for large scale woodcarving and sculpting applications with carbide or steel burs and larger mounted grinding stones.C.FCH-2 Speed Control Description: The reliable C.FCH-2 is a 230 volt version of Foredom s most popular speed control. It features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. It provides smooth control throughout the entire speed range. Comes with standard 3-prong US style plug unless specified. Please select your power cord preference from the drop down menu above: UK plug with internal fuse (CP Option 21), Continental European with 2 prongs and grounding hole (CP Option 22), Australian with 3 prongs (CP Option 26), or No Plug (CP Option20). 7" long, 4-1 2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls. M.SRH motors are available in both 115 Volt and 230 Volt.Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's four square drive handpieces - the H.25H, H.30H, H.44HT and H.28H. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.SRH-FCH-2CP Manufacturer : Foredom
  Foredom SRJ CE Hang-Up Motor with Slip Joint Shaft and FCT-2CE Foot Control, 230 Volt

Retail Price: $275.00
You save: $27.50  (10%)
Our Price: $247.50

Foredom SRJ CE Hang-Up Motor with Slip Joint Shaft and FCT-2CE Foot Control, 230 Volt

Foredom M.SRJ CE Hang-Up Motor with C.FCT-2CE Foot Control, 230 Volt. CE compliant motor-control combination. Hang-up motor with European slip joint shaft and protective sheath plus foot control. Here our most popular flex shaft model, the M.SR hang-up style motor, comes equipped with a European slip joint shaft and sheath for use with slip joint handpieces. It is teamed up with the C.FCT2CE foot operated speed control in plastic housing. This motor and speed combination is CE compliant and meets all electrical and safety requirements.. M.SRJ CE Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SR CE combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. It comes equipped with a motor bale for hanging, and a 36-7/8" long slip joint inner shaft and outer sheath for connecting to slip joint style handpieces. Foredom s 25+ "quick disconnect" handpieces CANNOT connect to this style shaft.C.FCT-2CE Speed Control Description: This speed control features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. It provides smooth control throughout the entire speed range. CE compliant. Available with different power cord plug options, please select from the drop down menu above: UK plug with internal fuse (CP Option 21), Continental European with 2 prongs and grounding hole (CP Option 22), or Australian with 3 prongs (CP Option 26).7" long, 4-1 2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SRJ CE Motors and Controls. M.SRJ motors are available in both 115 Volt and 230 Volt.Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.SRJ-FCT2CE-CP Manufacturer : Foredom
  Foredom SRM Bench Motor with Built-in Dial Control, 230 Volt

Retail Price: $304.00
You save: $30.40  (10%)
Our Price: $273.60

Foredom SRM Bench Motor with Built-in Dial Control, 230 Volt

Foredom M.SRM Bench Motor with Built-in Dial Control, 230 Volt. Bench motor with built-in dial control in cast iron base and key tip shaft and protective sheath. Here a bench style version of Foredom's 1/6 HP Series SR motor has an integrated dial speed control built into its cast-iron base for manual speed adjustment and easy placement anywhere on the workbench. This is a 230 Volt Motor. M.SRM Motor Description: Foredom's 1/6 HP, universal, flexible shaft machine runs in forward and reverse rotation at speeds up to 18,000 RPM. The M.SRM combines the most important features our customers expect-power, reversibility, reliability, and versatility- all into one motor. It comes equipped with our standard 39" long key tip inner shaft and outer sheath for connecting to any of Foredom s 20+ interchangeable, quick disconnect handpieces. Built-in Speed Control Description: The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit. Motor Details:The 1/6 hp, ball bearing Series SR has 33% more power than our older 1/8 hp motors, and 66% more than our original 1/10 hp models. The added power helps to reduce stalling or slowing down under normal workloads. Advantages of Running in Reverse:Left handed users have more control of the cutting toolReverse helps to keep dust and other debris flying away from right handed users Alternating motor direction helps to extend the life of certain abrasives Reverse helps with accomplishing symmetrical grinding and carving techniques Reverse makes it easier to back out stuck drill bitsAlternating motor direction makes it easier and faster to polish metals Two-Year Warranty on 1/6HP Series SR Motors and Controls. M.SRM motors are available in both 115 Volt and 230 Volt.Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.SRM-2CP Manufacturer : Foredom