LX Series Low Speed



  Foredom LX Hang-Up Motor with EMX-1 Dial Control, 115 Volt

Retail Price: $315.00
You save: $31.50  (10%)
Our Price: $283.50

Foredom LX Hang-Up Motor with EMX-1 Dial Control, 115 Volt

Foredom M.LX Hang-Up Motor with C.EMX-1 Dial Control, 115 Volt. Hang-up motor with key tip shaft and protective sheath plus dial control in plastic housing. Here our high torque/low speed flex shaft model, the M.LX hang-up style motor, is teamed up with the C.EMX-1 table top dial speed control in plastic housing. M.LX Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LX Motors and Controls. M.LX motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.EMX-1 Speed Control Description: The C.EMX-1 looks the same as our standard table top control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.EMX-1 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EMX-1 also has a replaceable fuse that protects the electronics during power surges and work overloads. For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors5" long, 5-3 4" wide, 2-5 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.LX-EMX Manufacturer : Foredom
  Foredom LX Hang-Up Motor with SXR-1 Foot Control, 115 Volt

Retail Price: $315.00
You save: $31.50  (10%)
Our Price: $283.50

Foredom LX Hang-Up Motor with SXR-1 Foot Control, 115 Volt

Foredom M.LX Hang-Up Motor with C.SXR-1 Foot Control, 115 Volt. Hang-up motor with key tip shaft and protective sheath plus foot operated control in metal housing. Here our high torque/low speed flex shaft model, the M.LX hang-up style motor, is teamed up with the C.SXR-1 foot operated speed control in metal housing. M.LX Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LX Motors and Controls. M.LX motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.SXR-1 Speed Control Description: This foot operated speed control comes in a metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.TXR-1. The ergonomics allow precise and reliable speed control with your foot. The C.SXR-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a special plug that fits the motor's shielded plug.For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. It is interchangeable with Foredom's C.TXR-1 and C.EMX-1 controls.6-3/4" long, 4" wide, 2-3/8" high, ship wt-6 lbs./2.7 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.LX-SXR Manufacturer : Foredom
  Foredom LX Hang-Up Motor with TXR-1 Foot Control, 115 Volt

Retail Price: $285.00
You save: $28.50  (10%)
Our Price: $256.50

Foredom LX Hang-Up Motor with TXR-1 Foot Control, 115 Volt

Foredom M.LX Hang-Up Motor with C.TXR-1 Foot Control, 115 Volt. Hang-up motor with key tip shaft and protective sheath plus foot control in plastic housing. Here our high torque/low speed flex shaft model, the M.LX hang-up style motor, is teamed up with the C.TXR-1 foot operated speed control in plastic housing. M.LX Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LX Motors and Controls. M.LX motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.TXR-1 Speed Control Description: This foot operated speed control is made of heavy duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. It is interchangeable with Foredom's C.SXR-1 and C.EMX-1 controls. 7" long, 4-1 2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.LX-TXR Manufacturer : Foredom
  Foredom LXB Bench Motor with EMX-1 Dial Control, 115 Volt

Retail Price: $345.00
You save: $34.50  (10%)
Our Price: $310.50

Foredom LXB Bench Motor with EMX-1 Dial Control, 115 Volt

Foredom M.LXB Bench Motor with C.EMX-1 Dial Control, 115 Volt. Bench motor with key tip shaft and protective sheath plus dial control in plastic housing. Here a bench style version of Foredom's High Torque/Low Speed Series LX motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.EM-1 table top dial speed control in plastic housing. M.LXB Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LXB Motors and Controls. M.LXB motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.EMX-1 Speed Control Description: The C.EMX-1 looks the same as our standard table top control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.EMX-1 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EMX-1 also has a replaceable fuse that protects the electronics during power surges and work overloads. 5" long, 5-3 4" wide, 2-5 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.LXB-EMX Manufacturer : Foredom
  Foredom LXB Bench Motor with SXR-1 Foot Control, 115 Volt

Retail Price: $345.00
You save: $34.50  (10%)
Our Price: $310.50

Foredom LXB Bench Motor with SXR-1 Foot Control, 115 Volt

Foredom M.LXB Bench Motor with C.SXR-1 Foot Control, 115 Volt. Bench motor with key tip shaft and protective sheath plus foot operated control in metal housing. Here a bench style version of Foredom's High Torque/Low Speed Series LX motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.EM-1 table top dial speed control in plastic housing. M.LXB Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LXB Motors and Controls. M.LXB motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.SXR-1 Speed Control Description: This foot operated speed control comes in a metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.TXR-1. The ergonomics allow precise and reliable speed control with your foot. The C.SXR-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a special plug that fits the motor's shielded plug.For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. 6-3/4" long, 4" wide, 2-3/8" high, ship wt-6 lbs./2.7 kg.It is interchangeable with Foredom's C.TXR-1 and C.EMX-1 controls. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.LXB-SXR Manufacturer : Foredom
  Foredom LXB Bench Motor with TXR-1 Foot Control, 115 Volt

Retail Price: $315.00
You save: $31.50  (10%)
Our Price: $283.50

Foredom LXB Bench Motor with TXR-1 Foot Control, 115 Volt

Foredom M.LXB Bench Motor with C.TXR-1 Foot Control, 115 Volt. Bench motor with key tip shaft and protective sheath plus foot control in plastic housing. Here a bench style version of Foredom's High Torque/Low Speed Series LX motor comes mounted in a cast-iron base for easy placement anywhere on the workbench. It is teamed up with the C.EM-1 table top dial speed control in plastic housing. M.LXB Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LXB Motors and Controls. M.LXB motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.TXR-1 Speed Control Description: This foot operated speed control is made of heavy duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. It is interchangeable with Foredom's C.SXR-1 and C.EMX-1 controls. 7" long, 4-1 2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.LXB-TXR Manufacturer : Foredom
  Foredom LXM Bench Motor with Built-in Dial Control, 115 Volt

Retail Price: $320.00
You save: $32.00  (10%)
Our Price: $288.00

Foredom LXM Bench Motor with Built-in Dial Control, 115 Volt

Foredom M.LXM Bench Motor with Built-in Dial Control, 115 Volt. Bench motor with built-in dial speed control in cast iron base. Here a bench style version of Foredom's Low Speed/High Torque Series LX motor has an integrated dial speed control built into its cast-iron base for manual speed adjustment and easy placement anywhere on the workbench. M.LXM Motor Description: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.15 and H.15D Hammer Handpieces. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 25+ "quick disconnect" handpieces. Two year warranty on High Torque/Low Speed Series LXM Motors and Controls.M.LXM motors are available in 115 Volt and 230 Volt. Built-in Speed Control Description: The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.LXM Manufacturer : Foredom
  Foredom LXBH Bench Motor with Heavy Duty Shafting and EMX-1 Foot Control, 115 Volt

Retail Price: $370.00
You save: $37.00  (10%)
Our Price: $333.00

Foredom LXBH Bench Motor with Heavy Duty Shafting and EMX-1 Foot Control, 115 Volt

Foredom M.LXBH Bench Motor with Heavy Duty Shafting and C.EMX-1 Foot Control, 115 Volt. Bench motor with heavy duty square drive shaft and protective sheath plus dial control in plastic housing. Here a bench style version of Foredom's high torque/low speed flex shaft model, the M.LXBH motor comes mounted in a cast-iron base and equipped with a longer square drive shaft and heavy duty protective sheath. Bench style motors are designed for easy placement anywhere on the workbench. It is teamed up with the C.EMX-1 table top dial speed control in plastic housing. M.LXBH Motor Description: This heavy duty model has exactly the same motor specifications as the M.LXB. These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. Heavy duty Series LXBH flex shafts feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm and come equipped with a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's four square drive handpieces- the H.25H, H.30H, H.44HT and new H.28H. Two year warranty on High Torque/Low Speed Series LXBH Motors and Controls. M.LXBH motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.EMX-1 Speed Control Description: The C.EMX-1 looks the same as our standard table top control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series TX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.EMX-1 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit. The C.EMX-1 also has a replaceable fuse that protects the electronics during power surges and work overloads. 5" long, 5-3 4" wide, 2-5 8" high, ship wt- 2 lbs./1 kg. It is interchangeable with Foredom's C.TXR-1 and C.SRX-1 controls. Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's four square drive handpieces - the H.25H, H.30H, H.44HT and H.28H.
Model : M.LXBH-EMX Manufacturer : Foredom
  Foredom LXBH Bench Motor with Heavy Duty Shafting and SXR-1 Foot Control, 115 Volt

Retail Price: $370.00
You save: $37.00  (10%)
Our Price: $333.00

Foredom LXBH Bench Motor with Heavy Duty Shafting and SXR-1 Foot Control, 115 Volt

Foredom M.LXBH Bench Motor with Heavy Duty Shafting and C.SXR-1 Foot Control, 115 Volt. Bench motor with heavy duty square drive shaft and protective sheath plus foot control in metal housing. Here a bench style version of Foredom's high torque/low speed flex shaft model, the M.LXBH motor comes mounted in a cast-iron base and equipped with a longer square drive shaft and heavy duty protective sheath. Bench style motors are designed for easy placement anywhere on the workbench. It is teamed up with the C.SXR-1 foot operated speed control in metal housing. M.LXBH Motor Description: This heavy duty model has exactly the same motor specifications as the M.LXB. These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. Heavy duty Series LXBH flex shafts feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm and come equipped with a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's four square drive handpieces- the H.25H, H.30H, H.44HT and new H.28H. Two year warranty on High Torque/Low Speed Series LXBH Motors and Controls. M.LXBH motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.SXR-1-1 Speed Control Description: This foot operated speed control comes in a metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.TXR-1. The ergonomics allow precise and reliable speed control with your foot. The C.SXR-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a special plug that fits the motor's shielded plug.For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. 6-3/4" long, 4" wide, 2-3/8" high, ship wt-6 lbs./2.7 kg.It is interchangeable with Foredom's C.TXR-1 and C.EMX-1 controls. Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's four square drive handpieces - the H.25H, H.30H, H.44HT and H.28H.
Model : M.LXBH-SXR Manufacturer : Foredom
  Foredom LXBH Bench Motor with Heavy Duty Shafting and TXR-1 Foot Control, 115 Volt

Retail Price: $340.00
You save: $34.00  (10%)
Our Price: $306.00

Foredom LXBH Bench Motor with Heavy Duty Shafting and TXR-1 Foot Control, 115 Volt

Foredom M.LXBH Bench Motor with Heavy Duty Shafting and C.TXR-1 Foot Control, 115 Volt. Bench motor with heavy duty square drive shaft and protective sheath plus foot control in plastic housing. Here a bench style version of Foredom's high torque/low speed flex shaft model, the M.LXBH motor comes mounted in a cast-iron base and equipped with a longer square drive shaft and heavy duty protective sheath. Bench style motors are designed for easy placement anywhere on the workbench. It is teamed up with the C.TXR-1 foot operated speed control in plastic housing. M.LXBH Motor Description: This heavy duty model has exactly the same motor specifications as the M.LXB. These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. Heavy duty Series LXBH flex shafts feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm and come equipped with a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's three square drive handpieces- the H.25H, H.30H and H.44HT. Two year warranty on High Torque/Low Speed Series LXBH Motors and Controls. M.LXBH motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.TXR-1 Speed Control Description: This foot operated speed control is made of heavy duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. It is interchangeable with Foredom's C.SXR-1 and C.EMX-1 controls. 7" long, 4-1 2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's three square drive handpieces - the H.25H, H.30H and H.44HT.
Model : M.LXBH-TXR Manufacturer : Foredom
  Foredom LXH Hang-Up Motor with Heavy Duty Shafting and SXR-1 Foot Control, 115 Volt

Retail Price: $340.00
You save: $34.00  (10%)
Our Price: $306.00

Foredom LXH Hang-Up Motor with Heavy Duty Shafting and SXR-1 Foot Control, 115 Volt

Foredom M.LXH Hang-Up Motor with Heavy Duty Shafting and C.SXR-1 Foot Control, 115 Volt. Hang-up motor with heavy duty square drive shaft and protective sheath plus foot control in metal housing. Here our high torque/low speed flex shaft model, the M.LX hang-up style motor, is equipped with a longer square drive shaft and heavy duty protective sheath. It is teamed up with the C.SXR-1 foot operated speed control in metal housing. M.LXH Motor Description: This heavy duty model has exactly the same motor specifications as the M.LX. These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. Heavy duty Series LXH flex shafts feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm and come equipped with a motor bale for hanging, and a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's three square drive handpieces- the H.25H, H.30H and H.44HT. Two year warranty on High Torque/Low Speed Series LXH Motors and Controls. M.LXH motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.SXR-1 Speed Control Description: This foot operated speed control comes in a metal housing and the extra weight provides added stability and control. It features the same durable, solid state electronics as the C.TXR-1. The ergonomics allow precise and reliable speed control with your foot. The C.SXR-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a special plug that fits the motor's shielded plug.For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. 6-3/4" long, 4" wide, 2-3/8" high, ship wt-6 lbs./2.7 kg.It is interchangeable with Foredom's C.TXR-1 and C.EMX-1 controls. Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's three square drive handpieces - the H.25H, H.30H and H.44HT. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.LXH-SXR Manufacturer : Foredom
  Foredom LXH Hang-Up Motor with Heavy Duty Shafting and TXR-1 Foot Control, 115 Volt

Retail Price: $310.00
You save: $31.00  (10%)
Our Price: $279.00

Foredom LXH Hang-Up Motor with Heavy Duty Shafting and TXR-1 Foot Control, 115 Volt

Foredom M.LXH Hang-Up Motor with Heavy Duty Shafting and C.TXR-1 Foot Control, 115 Volt. Hang-up motor with heavy duty square drive shaft and protective sheath plus foot control in plastic housing. Here our high torque/low speed flex shaft model, the M.LX hang-up style motor, is equipped with a longer square drive shaft and heavy duty protective sheath. It is teamed up with the C.TXR-1 foot operated speed control in plastic housing. M.LXH Motor Description: This heavy duty model has exactly the same motor specifications as the M.LX. These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. Heavy duty Series LXH flex shafts feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm and come equipped with a motor bale for hanging, and a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's three square drive handpieces- the H.25H, H.30H and H.44HT. Two year warranty on High Torque/Low Speed Series LXH Motors and Controls. M.LXH motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.TXR-1 Speed Control Description: This foot operated speed control is made of heavy duty plastic with durable solid state electronics. The ergonomics allow precise and reliable speed control with your foot. For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. It is interchangeable with Foredom's C.SXR-1 and C.EMX-1 controls. 7" long, 4-1 2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg. Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's three square drive handpieces - the H.25H, H.30H and H.44HT. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.LXH-TXR Manufacturer : Foredom
  Foredom LXH Hang-Up Motor with Heavy Duty Sheath & Sheath and EMX-1 Foot Control, 115 Volt

Retail Price: $340.00
You save: $34.00  (10%)
Our Price: $306.00

Foredom LXH Hang-Up Motor with Heavy Duty Sheath & Sheath and EMX-1 Foot Control, 115 Volt

Foredom M.LXH Hang-Up Motor with Heavy Duty Sheath Sheath and C.EMX-1 Foot Control, 115 Volt. Hang-up motor with heavy duty square drive shaft and protective sheath plus dial control in plastic housing. Here our high torque/low speed flex shaft model, the M.LX hang-up style motor, is equipped with a longer square drive shaft and heavy duty protective sheath. It is teamed up with the C.EMX-1 table top dial speed control in plastic housing. M.LXH Motor Description: This heavy duty model has exactly the same motor specifications as the M.LX. These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. Heavy duty Series LXH flex shafts feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm and come equipped with a motor bale for hanging, and a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's three square drive handpieces- the H.25H, H.30H and H.44HT. Two year warranty on High Torque/Low Speed Series LXH Motors and Controls. M.LXH motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a TXR-1, SXR-1, or EMX-1 speed control. Damage will result if the motor is connected to any other speed control. C.EMX-1 Speed Control Description: The C.EMX-1 looks the same as our standard table top control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.EMX-1 is a solid state control in a plastic housing that can be positioned anywhere on a work surface. The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again by marking the setting on the dial. The C.EMX-1 also has a replaceable fuse that protects the electronics during power surges and work overloads. 5" long, 5-3 4" wide, 2-5 8" high, ship wt- 2 lbs./1 kg. It is interchangeable with the X.TXR-1 and C.SXR-1. Handpieces are available separately and required to operate your flex shaft machine. This motor-speed control combination will only work with Foredom's three square drive handpieces - the H.25H, H.30H and H.44HT. Hang-Up style motors require the use of a motor hanger (available separately) to secure the tool above the work bench. See Related Products below.
Model : M.LXH-EMX Manufacturer : Foredom
  Foredom LXMH Bench Motor with Heavy Duty Shaft & Sheath and Built-in Dial Control, 115 Volt

Retail Price: $345.00
You save: $34.50  (10%)
Our Price: $310.50

Foredom LXMH Bench Motor with Heavy Duty Shaft & Sheath and Built-in Dial Control, 115 Volt

Foredom M.LXMH Bench Motor with Heavy Duty Shaft Sheath and Built-in Dial Control, 115 Volt. Bench motor with heavy duty square drive shaft and protective sheath and built-in dial control in cast iron base. Here a bench style version of Foredom's high torque/low speed flex shaft Series LXH motor has an integrated dial speed control built into its cast-iron base for manual speed adjustment and easy placement anywhere on the workbench. It comes equipped with a longer square drive shaft and heavy duty protective sheath. M.LXMH Motor Description: This heavy duty model has exactly the same motor specifications as the M.LXM. These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. Heavy duty Series LXH flex shafts feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm and come equipped with a motor bale for hanging, and a 63" long, square drive shaft and heavy duty protective sheath in place of the standard key-tip shaft and sheath. Heavy duty shafts and sheaths can ONLY work with Foredom's three square drive handpieces- the H.25H, H.30H and H.44HT. Two year warranty on High Torque/Low Speed Series LXMH Motors and Controls. M.LXMH motors are available in 115 Volt and 230 Volt.Built-in Speed Control Description: The hand dial is used to adjust and set speed. This manual style control allows you to maintain and return to a desired speed, time and again, by using the motor on/off switch rather than the speed control to power up the unit. Handpieces are available separately and required to operate your flex shaft machine. Please review our extensive line for the handpiece that suits your application. The Foredom flex shaft system is designed to allow interchangeability of most handpieces.
Model : M.LXMH Manufacturer : Foredom