Series LX Motor Kits



  Foredom 2240 Stone Setting Kit, Quick Change, 115 Volt

Retail Price: $451.00
You save: $67.65  (15%)
Our Price: $383.35

Foredom 2240 Stone Setting Kit, Quick Change, 115 Volt

Foredom K.2240 Stone Setting Kit, Quick Change, 115 Volt. Includes M.LX hang-up motor. C.TXR foot operated control, H.18 handpiece, 13pc accessory assortment, more. PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications. Quick Change Stone Setting Kit K.2240 has a Total Retail Value of $447. Motor and Speed Control carry a 2 Year Warranty. Components:1. Series LX Motor: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.18, H.15 and H.15D Quick Change and Hammer Handpieces for stone setting. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 20+ "interchangeable" handpieces.Two year warranty on High Torque/Low Speed Series LX Motors and Controls.M.LX motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a C.TXR, C.SXR, or C.EMX speed control. Damage will result if the motor is connected to any other speed control. 2. C.TXR Speed Control: The C.TXR looks the same as our standard foot operated control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX and TX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.TXR features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. 7" long, 4-1/2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg.3. H.18 Quick Change Handpiece: The H.18 is for use with only 2.35mm (3/32") shank burs. A press lever action is all that is required to change accessories. It features a very slim grip and pre-lubricated ball bearings that do not require any lubrication. 7" long, 19/32" dia., wt. 3.65 oz., ship wt. 4.45 oz. Member of the Foredom system of "Interchangeable Handpieces". 4. AK90 Accessory Kit: 13 pc. assortment of step drills and steel engraving burs in small round bur holder.5. Flexible shaft grease and ATAT-1 Accessory tray.
Model : K.2240 Manufacturer : Foredom
  Foredom 2245 Deluxe Stone Setting Kit, 2 Handpieces, 115 Volt

Retail Price: $586.00
You save: $87.90  (15%)
Our Price: $498.10

Foredom 2245 Deluxe Stone Setting Kit, 2 Handpieces, 115 Volt

Foredom K.2245 Deluxe Stone Setting Kit, 2 Handpieces, 115 Volt. Includes M.LX hang-up motor. C.TXR foot operated control, H.18 and H.15 handpieces, 13pc accessory kit, more. PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications. Deluxe Stone Setting Kit with 2 Handpieces K.2245 has a Total Retail Value of $655. Motor and Speed Control carry a 2 Year Warranty. Components:1. Series LX Motor: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.18, H.15 and H.15D Quick Change and Hammer Handpieces for stone setting. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 20+ "interchangeable" handpieces.Two year warranty on High Torque/Low Speed Series LX Motors and Controls.M.LX motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a C.TXR, C.SXR, or C.EMX speed control. Damage will result if the motor is connected to any other speed control. 2. C.TXR Speed Control: The C.TXR looks the same as our standard foot operated control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX and TX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.TXR features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. 7" long, 4-1/2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg.3. H.18 Quick Change Handpiece: The H.18 is for use with only 2.35mm (3/32") shank burs. A press lever action is all that is required to change accessories. It features a very slim grip and pre-lubricated ball bearings that do not require any lubrication. 7" long, 19/32" dia., wt. 3.65 oz., ship wt. 4.45 oz. Member of the Foredom system of "Interchangeable Handpieces".4. H.15 Hammer Handpiece: The H.15 Handpiece has a hammering rather than rotary action for use at low speed (0-5,000 rpm) by jewelers for stone setting and decorative work. Comes with an anvil point (HP10177). It requires periodic lubrication. Hammer has 1/32" stroke and its impact can be adjusted from light to heavy by turning the silver knurled adjusting ring. Optional points are available: 6 different shaped Anvil Points (HP10171, HP10172, HP10173, HP10175, HP10176 and HP10179); Pave Point (R15PT), and Stylus with Carbide Tip (HP10212). 6-1/4" long, 1/4" dia. at tip, wt. 3.65 oz., ship wt. 4.85 oz. Member of the Foredom system of "Interchangeable Handpieces". 5. AK90 Accessory Kit: 13 pc. assortment of step drills and steel engraving burs in small round bur holder.6. Flexible shaft grease and ATAT-1 Accessory tray.
Model : K.2245 Manufacturer : Foredom
  Foredom 2250 Hammer Stone Setting Kit, 115 Volt

Retail Price: $430.00
You save: $64.50  (15%)
Our Price: $365.50

Foredom 2250 Hammer Stone Setting Kit, 115 Volt

Foredom K.2250 Hammer Stone Setting Kit, 115 Volt. Includes M.LX hang-up motor. C.TXR foot operated control, H.15 handpiece with anvil and pave points, and carbide stylus. PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications. Hammer Stone Setting Kit K.2250 has a Total Retail Value of $486. Motor and Speed Control carry a 2 Year Warranty. Components:1. Series LX Motor: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.18, H.15 and H.15D Quick Change and Hammer Handpieces for stone setting. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 19 "interchangeable" handpieces.Two year warranty on High Torque/Low Speed Series LX Motors and Controls.M.LX motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a C.TXR, C.SXR, or C.EMX speed control. Damage will result if the motor is connected to any other speed control. 2. C.TXR Speed Control: The C.TXR looks the same as our standard foot operated control but it has special electronics that converts AC current from an electrical outlet to DC current, the type required by Series LX and TX motors. This control also has a different style plug that is made to fit the motor's shielded-type plug. The C.TXR features solid state circuitry in a heavy duty plastic housing with an extra wide footprint, low profile, and non-skid pads on the bottom. 7" long, 4-1/2" wide, 2-3 8" high, ship wt- 2 lbs./1 kg.3. H.15 Hammer Handpiece: The H.15 Handpiece has a hammering rather than rotary action for use at low speed (0-5,000 rpm) by jewelers for stone setting and decorative work. Comes with an anvil point (HP10177), Pave Point (R15PT), and Stylus with Carbide Tip (HP10212). It requires periodic lubrication. Hammer has 1/32" stroke and its impact can be adjusted from light to heavy by turning the silver knurled adjusting ring. Optional points are available: 6 different shaped Anvil Points (HP10171, HP10172, HP10173, HP10175, HP10176 and HP10179). 6-1/4" long, 1/4" dia. at tip, wt. 3.65 oz., ship wt. 4.85 oz. Member of the Foredom system of "Interchangeable Handpieces". 4. Flexible shaft grease
Model : K.2250 Manufacturer : Foredom
  Foredom 2252 Chisel Carving Kit, 115 Volt

Retail Price: $434.00
You save: $65.10  (15%)
Our Price: $368.90

Foredom 2252 Chisel Carving Kit, 115 Volt

Foredom K.2252 Chisel Carving Kit, 115 Volt. Includes M.LX hang-up motor. C.EMX dial control, H.50 handpiece, 17 chisels, more. PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications. Chisel Carving Kit K.2252 has a Total Retail Value of $482. Motor and Speed Control carry a 2 Year Warranty. Components:1. Series LX Motor: These permanent magnet motors are specifically designed for high torque/low speed applications, offering more power for jobs like stone setting, wax modeling, and pearl drilling. M.LX, M.LXM, and M.LXB ball bearing motors feature full power and torque from start up and throughout the entire speed range up to 5,000 rpm. They are ideal for use with Foredom s drill presses. They also are well matched with the H.18, H.15 and H.15D Quick Change and Hammer Handpieces for stone setting. It comes equipped with a motor bale for hanging, and our standard 39" long key tip inner shaft and special/more flexible neoprene outer protective sheath for connecting to any of Foredom s 20+ "interchangeable" handpieces.Two year warranty on High Torque/Low Speed Series LX Motors and Controls.M.LX motors are available in 115 Volt and 230 Volt. Foredom s permanent magnet motors require the use of a C.TXR, C.SXR, or C.EMX speed control. Damage will result if the motor is connected to any other speed control. 2. C.EMX Speed Control: This table top speed control is constructed of heavy duty plastic with durable solid state electronics. It has a dial control for precise speed settings, as well as good repeatability of previous settings. The C.EMX-1 has special electronics that converts AC current from an electrical outlet to DC current- the type required by the motor. It also has a special plug that fits the motor's shielded plug.For use with 115 Volt M.TX, M.TXB, M.TXH, M.LX, M.LXB, M.LXH and M.LXBH motors. 5" long, 5-3/4" wide, 2-5/8" high, ship wt-2 lbs./1 kg. It is interchangeable with Foredom's C.TXR-1 and C.SXR-1 controls.3. H.50 Chisel Handpiece: Foredom's chisel handpiece gives a power assist to carving projects in all types of wood, plastic, and plaster. This handpiece has a contoured body design that features a rugged plastic barrel and tapered aluminum ends. The easy to maintain chisel handpiece is recommended for use at low speed with Series TX and LX motors and in forward rotation only with Series SR motors. Handpiece attaches to any flex shaft machine with a standard key tip shaft. The Chisel Handpiece must be used only in the forward motor direction. Recommended Speed:Optimum Speed Range- 3,000-10,000 rpm.Max. Operating Speed- 18,000 rpm. Handpiece specifications: 6" long, 1" in diameter, weight: 4.6 oz., ship wt: 6.65 oz. Maintenance: After every 200 hours of use you should clean and lubricate this handpiece. The old grease must be cleaned off of the interior cam chamber and replaced with new lubricant. If you do not have Foredom Grease (Part No. MS10008), it is available in our web store under Supplies and Parts - Lubrication- All Lubricants. Follow the instructions that came with your handpiece or click on the link for step by step maintenance instructions. Operating Tip: Using the chisel handpiece with a dial speed control is easier than with a foot operated control. Table top dial controls are available separately and named below. Consider ordering a kit containing the chisel handpiece and dial speed control (kit depends on motor -M.TX M.LX or M.SR- that you have). Certain Foredom bench mounted flex shafts also come with dial controls built into their bases (models M.LXM, M.TXMand M.SRM). 4. 6pc Chisel SetAKHK550 with A-KC503, A-KC504, A-KC505, A-KC506, A-KC509, and A-KC510 chisels, 5pc Chisel Set AKHK560 with A-KC501, A-KC502, A-KC507, A-KC508, and A-KC511 chisels and 6pc Chisel Set AKHK570 with A-KC512, A-KC513, A-KC514, A-KC515, A-KC516, and A-KC517 chisels.6. Flexible shaft grease and ATAT-1 Accessory tray.
Model : K.2252 Manufacturer : Foredom