Standard Key Handpieces



  Foredom No. 10 Handpiece with Quick Change - "Quick Disconnect"

Retail Price: $279.00
You save: $13.95  (5%)
Our Price: $265.05

Foredom No. 10 Handpiece with Quick Change - "Quick Disconnect"

Foredom No. 10 Handpiece with Quick Change - "Quick Disconnect"Quick Change are a subgroup of Collet Type handpieces that accommodate only a single collet size - 2.35mm (or 3/32"). Quick Change handpieces allow you to change out accessories (burs, bits, cutters, drills, etc.) with only a brief interruption in work and without the use of a chuck key or pin & wrench. The No. 10 is a Quick Change Handpiece featuring a slim grip and pre-lubricated ball bearings that do not require any lubrication. For use with only 3/32" (2.35mm) burs. A rotating lever action is all that is required to change accessories. Exclusively for use with 3/32" shank burs. 7-5/16" long, 21/32" dia., wt. 4.55 oz., ship wt. 5.5 oz. Member of the Foredom system of "Quick Disconnect" handpieces.
Model : H.10 Manufacturer : Foredom
  Foredom No. 10D Handpiece with Quick Change & Duplex Spring - "Quick Disconnect"

Retail Price: $304.00
You save: $15.20  (5%)
Our Price: $288.80

Foredom No. 10D Handpiece with Quick Change & Duplex Spring - "Quick Disconnect"

Foredom No. 10D Handpiece with Quick Change & Duplex Spring - "Quick Disconnect" Quick Change are a subgroup of Collet Type handpieces that accommodate only a single collet size - 2.35mm (or 3/32"). Quick Change handpieces allow you to change out accessories (burs, bits, cutters, drills, etc.) with only a brief interruption in work and without the use of a chuck key or pin & wrench.Same as the No. 10, with the addition of a Duplex Spring. For use only with 3/32" (2.35mm) burs. The spring provides extra flexibility to the handpiece. Duplex springs are subject to breakage. We recommend that only experienced users of flex shaft tools whose work demands the added flexibility consider purchasing this style handpiece. For most users, the "straight" handpiece is the preferrable solution. For use only with 3/32" (2.35mm) burs. 10-3/4" long, 21/32" dia., wt. 5.95 oz., ship wt. 7.5 oz. Member of the Foredom system of "Quick Disconnect" handpieces.
Model : H.10D Manufacturer : Foredom
  Foredom No. 15 Hammer Handpiece

Retail Price: $144.00
You save: $7.20  (5%)
Our Price: $136.80

Foredom No. 15 Hammer Handpiece

Fordom No. 15 Hammer Handpiece Handpiece with hammering rather than rotary action for use at low speed (0-5,000 rpm) by jewelers for stone setting and decorative work. Comes with an anvil point (HP10177). Hammer has 1/32" stroke and its impact can be adjusted from light to heavy. Optional points are available: Pave Point (R15PT) and Stylus with Carbide Tip (HP10212). 5-1/4" long, 1/4" dia. at tip, wt. 3.65 oz., ship wt. 4.9 oz. Member of the Foredom system of "Quick Disconnect" handpieces.
Model : 15 Manufacturer : Foredom
  Foredom No. 15D Handpiece with Duplex Spring - "Quick Disconnect"

Retail Price: $169.00
You save: $8.45  (5%)
Our Price: $160.55

Foredom No. 15D Handpiece with Duplex Spring - "Quick Disconnect"

Foredom No. 15D Handpiece with Duplex Spring - "Quick Disconnect"Same as the No. 15, with the addition of a Duplex Spring. The spring provides extra flexibility to the handpiece.Duplex springs are subject to breakage. We recommend that only experienced users of flex shaft tools whose work demands the added flexibility consider purchasing this style handpiece. For most users, the "straight" handpiece is the preferrable solution. 9-5/8" long, 1/4" dia. at tip, wt. 5.2 oz., ship wt. 7.15 oz. Member of the Foredom system of "Quick Disconnect" handpieces.
Model : H.15D Manufacturer : Foredom
  Foredom No. 18 Handpiece with Quick Change - "Quick Disconnect"

Retail Price: $150.00
You save: $7.50  (5%)
Our Price: $142.50

Foredom No. 18 Handpiece with Quick Change - "Quick Disconnect"

Foredom No. 18 Handpiece with Quick Change - "Quick Disconnect" Quick Change are a subgroup of Collet Type handpieces that accommodate only a single collet size - 2.35mm (or 3/32"). Quick Change handpieces allow you to change out accessories (burs, bits, cutters, drills, etc.) with only a brief interruption in work and without the use of a chuck key or pin & wrench.This handpiece is temporarily out of stock until mid-September. We apologize for any inconvenience this may cause. The No. 18 is a Quick Change Handpiece for use with only 3/32" (2.35mm) burs. A press lever action is all that is required to change accessories. It features a very slim grip and pre-lubricated ball bearings that do not require any lubrication. Exclusively for use with 3/32" shank burs. 7" long, 19/32" dia., wt. 3.65 oz., ship wt. 4.45 oz. Member of the Foredom system of "Quick Disconnect" handpieces. A new Allset attachment is available separately for this handpiece.
Model : H.18 Manufacturer : Foredom
  Foredom No. 18D Handpiece with Quick Change & Duplex Spring - "Quick Disconnect"

Retail Price: $175.00
You save: $8.75  (5%)
Our Price: $166.25

Foredom No. 18D Handpiece with Quick Change & Duplex Spring - "Quick Disconnect"

Foredom No. 18D Handpiece with Quick Change & Duplex Spring - "Quick Disconnect"Quick Change are a subgroup of Collet Type handpieces that accommodate only a single collet size - 2.35mm (or 3/32"). Quick Change handpieces allow you to change out accessories (burs, bits, cutters, drills, etc.) with only a brief interruption in work and without the use of a chuck key or pin & wrench.Same as the No. 18, with the addition of a Duplex Spring. The spring provides extra flexibility to the handpiece. For use only with 3/32" (2.35mm) burs. Duplex springs are subject to breakage. We recommend that only experienced users of flex shaft tools whose work demands the added flexibility consider purchasing this style handpiece. For most users, the "straight" handpiece is the preferrable solution. For use with only 3/32" (2.35mm) burs. 10-3/8" long, 19/32" dia., wt. 5.3 oz., ship wt. 8.15 oz. Member of the Foredom system of "Quick Disconnect" handpieces.
Model : H.18D Manufacturer : Foredom
  Foredom No. 20 Handpiece with Quick Change - "Quick Disconnect"

Retail Price: $92.00
You save: $4.60  (5%)
Our Price: $87.40

Foredom No. 20 Handpiece with Quick Change - "Quick Disconnect"

Foredom No. 20 Handpiece with Quick Change - "Quick Disconnect" No. 20 is a Quick Change Handpiece for use only with 3/32in (2.35mm) burs. A lever action on the the handpiece body is all that is required to change accessories. Quick Change are a subgroup of Collet Type handpieces that accommodate only a single collet size - 2.35mm (or 3/32"). Quick Change handpieces allow you to change out accessories (burs, bits, cutters, drills, etc.) with only a brief interruption in work and without the use of a chuck key or pin & wrench. It has a molded plastic front grip with tapered sides for easy and close handling, plus pre-lubricated ball bearings that do not require additional lubrication. Exclusively for use with 3/32" shank burs. 5-5/8" long, 1-1/8" dia. (center), 3/8" dia. (front taper), wt. 4 oz., ship wt. 4.75 oz. Member of the Foredom system of "Quick Disconnect" handpieces.
Model : H.20 Manufacturer : Foredom
  Foredom No. 20D Handpiece with Duplex Spring - "Quick Disconnect"

Retail Price: $117.00
You save: $5.85  (5%)
Our Price: $111.15

Foredom No. 20D Handpiece with Duplex Spring - "Quick Disconnect"

Foredom No. 20D Handpiece with Duplex Spring - "Quick Disconnect"Same as the No. 20, with the addition of a Duplex Spring. The spring provides extra flexibility to the handpiece.Duplex springs are subject to breakage. We recommend that only experienced users of flex shaft tools whose work demands the added flexibility consider purchasing this style handpiece. For most users, the "straight" handpiece is the preferrable solution. For use only with 3/32" (2.35mm) burs. 10-1/8" long, 1-1/8" dia (center), 3/8" dia. (front taper), wt. 5.4 oz., ship wt. 7.5 oz. Member of the Foredom system of "Quick Disconnect" handpieces.
Model : H.20D Manufacturer : Foredom
  Foredom No. 25 Continuous Production Handpiece for Heavy Duty Applications - "Quick Disconnect"

Retail Price: $165.00
You save: $8.25  (5%)
Our Price: $156.75

Foredom No. 25 Continuous Production Handpiece for Heavy Duty Applications - "Quick Disconnect"

Foredom No. 25 Continuous Production Handpiece for Heavy Duty Applications - "Quick Disconnect" Precision handpiece made for continuous production work. Comes with 1/8" (3.18mm)and 1/4" (6.35mm) collets, and pin and wrench for changing collets and accessories. Other fractional and metric collets are available separately and in Collet Set 103000. 5-3/8" long, 1-1/32" dia., wt. 7.15 oz., ship wt. 9.65 oz. Member of the Foredom system of "Quick Disconnect" handpieces.
Model : H.25 Manufacturer : Foredom
  Foredom No. 28 Handpiece - "Quick Disconnect"

Retail Price: $66.00
You save: $3.30  (5%)
Our Price: $62.70

Foredom No. 28 Handpiece - "Quick Disconnect"

A slender, comfortable design with tapered grip and pre-lubricated ball bearings that do not require lubrication. Comes with 3/32" and 1/8" collets, and pin and chuck wrench for changing collets and accessories. Other fractional and metric collets are available and in Collet Set 600. 5-1/4" long, 3/4" dia. (center), 1/2" dia. (taper), wt. 3 oz., ship wt. 4.35 oz. Member of the Foredom system of "Quick Disconnect" handpieces.
Model : H.28 Manufacturer : Foredom
  Foredom No. 30 Handpiece - "Quick Disconnect"

Retail Price: $70.00
You save: $3.50  (5%)
Our Price: $66.50

Foredom No. 30 Handpiece - "Quick Disconnect"

Foredom's most popular handpiece features a #0 geared 3-jaw Jacobs Chuck. It accepts any size accessory shank or drill bit up to 5/32". Prelubricated ball bearings require no maintenance. Comes with HPCK-0 chuck key. 5-3/16" long, 1" dia., wt. 5.85 oz., ship wt. 8.6 oz. Various bench top tools attach to this versatile handpiece, such as the Foredom drill press, handpiece holder, or the AllSet stone setting and milling kits. Member of the Foredom system of "Quick Disconnect" handpieces. For added comfort, consider also buy Foredom HPG-30 Handpiece Grip - Cushion Grip for No. 30 Hand. For added versatility, consider purchasing the
Model : H.30 Manufacturer : Foredom
  Foredom No. 43T Handpiece - "Quick Disconnect"

Retail Price: $66.00
You save: $3.30  (5%)
Our Price: $62.70

Foredom No. 43T Handpiece - "Quick Disconnect"

Foredom No. 43T Handpiece - "Quick Disconnect"Same as the popular 44T collet-style handpiece, except 1" shorter. Ideal for using larger accessories in difficult to reach and interior spaces. Accomodates accessories with up to 1/4" diameter shanks. Prelubricated ball bearings require no maintenance. Comes with 3/32", 1/8" and 1/4" collets, pin and wrench for changing collets and accessories. Other size collets are available separately or in Collet Set 440. 4-1/2" long, 1" dia. (center), 3/4" dia. (taper), wt. 4.9 oz., ship wt. 7.75 oz. Member of the Foredom system of "Quick Disconnect" handpieces.
Model : H.43T Manufacturer : Foredom
  Foredom No. 44T Handpiece - "Quick Disconnect"

Retail Price: $66.00
You save: $3.30  (5%)
Our Price: $62.70

Foredom No. 44T Handpiece - "Quick Disconnect"

Foredom No. 44T Handpiece - "Quick Disconnect"Collet type handpiece that accomodates accessories with up to 1/4" diameter shanks. Prelubricated ball bearings require no maintenance. Comes with 3/32", 1/8" and 1/4" collets, pin and wrench for changing collets and accessories. Other size collets are available separately or in Collet Set 440. 5-5/8" long, 1" dia. (center), 3/4" dia. (taper), wt. 5.88 oz., ship wt. 7.5 oz. Member of the Foredom system of "Quick Disconnect" handpieces.
Model : H.44T Manufacturer : Foredom
  Foredom No. 8 Handpiece - "Quick Disconnect"

Retail Price: $66.00
You save: $3.30  (5%)
Our Price: $62.70

Foredom No. 8 Handpiece - "Quick Disconnect"

Foredom No. 8 Handpiece - "Quick Disconnect"Slim collet handpiece for fine detail work. Prelubricated ball bearings require no maintenance. Chuck guard slides back when changing burs. Comes with 3/32" and 1/8" collets and chuck wrenches for changing collets and accessories. Other fractional and metric size collets are available separately or in Collet Set 600. 6-1/8" long, 5/8" dia., wt. 3.55 oz., ship wt. 5.15 oz. Member of the Foredom system of "Quick Disconnect" handpieces.
Model : H.8 Manufacturer : Foredom
  Foredom No. 8D Handpiece with Duplex Spring - "Quick Disconnect"

Retail Price: $110.00
You save: $5.50  (5%)
Our Price: $104.50

Foredom No. 8D Handpiece with Duplex Spring - "Quick Disconnect"

Foredom No. 8D Handpiece with Duplex Spring - "Quick Disconnect"Same as the No. 8, with the addition of a Duplex Spring. The spring provides extra flexibility to the handpiece. Duplex springs are subject to breakage. We recommend that only experienced users of flex shaft tools whose work demands the added flexibility consider purchasing this style handpiece. For most users, the "straight" handpiece is the preferrable solution. 9-3/8" long, 5/8" dia., wt. 5.2 oz., ship wt. 7.45 oz. Member of the Foredom system of "Quick Disconnect" handpieces.
Model : H.8D Manufacturer : Foredom