Chisel (Reciprocating)



  Foredom No. 50 Chisel (Reciprocating) Handpiece - No Accessories

Foredom No. 50 Chisel (Reciprocating) Handpiece - No Accessories

Foredom's No. 50 chisel (reciprocating) handpiece gives a power assist to carving projects in all types of wood, plastic and plaster. Similar in appearance to the popular 44T, this handpiece has a contoured body design that features a rugged plastic barrel and tapered aluminum ends. This easy to maintain chisel handpiece is recommended for use with the 1/3 HP Series TX 1/6 HP Series SR motors, and attaches to any flex shaft machine with a standard key tip shaft (This would excluce the "Heavy Duty" units, such as TXH, SXH, or LXH). Check out our Foredom Motor Units category for more info. Note: The Chisel Handpiece must be used only in the forward motor direction. Optimum Speed Range- 3,000-10,000 rpm. Max. Operating Speed- 18,000 rpm. Handpiece specifications: 6" long, 1" in diameter, weight: 4.6 oz. The No. 50 does not come with any chisels. These accessories must be purchased separately, or buy a Kit for additional savings. See below for kit information. Maintenance: After every 200 hours of use you should clean and lubricate this handpiece. The old grease must be cleaned off of the interior cam chamber and replaced with new lubricant. Purchase additional tubes of Foredom Grease (Part No. MS10008 so your projects don't get delayed by maintenance. Follow the instructions that come with your handpiece or click on the link for step by step maintenance instructions: Foredom No. 50 Chisel (Reciprocating) Handpiece Maintenance Instructions Operating Tip: Using the new chisel handpiece with a dial speed control is easier than with a foot operated control. Table top dial controls are available separately and listed below. Dial Speed Controls (Sold Separately): Foredom Speed Control - EM Control for SR Series Foredom Speed Control - EMX Control for TX Series Consider ordering a kit containing the chisel handpiece and dial speed control (kit depends on motor -TX or SR- that you have). Kits including the No. 50, Speed Control, plus 11 chisels: Foredom No. 50 Chisel (Reciprocating) Handpiece - Plus 11 Chisels and an EM Speed Control (For SR Series) Foredom No. 50 Chisel (Reciprocating) Handpiece - Plus 11 Chisels and an EMX Speed Control (For TX LX Series) Already have a Speed Control? Or do you have a Foredom with a built-in Speed control?Certain Foredom bench mounted flex shafts also come with dial controls built into their bases (models SRM and TXM). Foredom No. 50 Chisel (Reciprocating) Handpiece - Plus 6 Piece Chisel Set 1 (AKHK550) Includes the Foredom No. 50 Handpiece with 6 chisels to get you started. Continue Building Your Chisel Collection with These Kits: Foredom - AK510 Chisel Set in Canvas Pouch 12 Piece Order Your Storage Pouch Seperately Foredom - AKHK550 Chisel Set 6 Piece Foredom - AKHK570 Chisel Set 6 Piece Foredom - AKHK560 Chisel Set 5 Piece Foredom - AKHK580 Chisel Set 5 Piece Or Order Your Chisels Individually: A-KC505 A-KC516 A-KC510 A-KC504 A-KC723 A-KC506 A-KC501 A-KC508 A-KC517 A-KC717 A-KC503 A-KC721 A-KC514 A-KC511 A-KC502 A-KC507 A-KC513 A-KC509 A-KC718 A-KC515 A-KC722 A-KC512 Foredom Reciprocating blades will work in some other reciprocators, including the Proxxon Motorized Power Carver SGM (Reciprocator), and Wecheer. For an overview of blade compatibility among various reciprocators, please visit our Reciprocating Tool Reference Chart. Did You Know that Flexcut RG Gouges Will Also Fit this Handpiece? Visit our Flexcut RG Series Gouges Category tor view these tools. Flexcut also offers handles, converting these gouges into hand tools for added versatility. Note: You are purchasing the Foredom No. 50 Handpiece ONLY on this Page. Used the links in the above description to help you navigate our site and take advantage of other kits and offers, and to find the right blades for you.
Model : H.50 Manufacturer : Foredom
  Foredom No. 50 Chisel (Reciprocating) Handpiece - Plus 11 Chisels and an EM Seed Control (For SR Series)

$168.95

Foredom No. 50 Chisel (Reciprocating) Handpiece - Plus 11 Chisels and an EM Seed Control (For SR Series)

Foredom No. 50 Chisel (Reciprocating) Handpiece - Plus 11 Chisels and an EM Seed Control (For SR Series). Kit EM-50 is for use with the 1/6 hp Series SR motor and other Foredom universal motors including the Series CC, S, and 1/8 HP SR models. Using the new chisel handpiece with the EM bench top dial speed control is easier than carving with a foot operated control. The EM control allows you to set and maintain a speed within the desired low end range of between 1,000 and 8,000 rpm. Kit EM-50 includes: EM dial speed control Foredom No. 50 Chisel (Reciprocating) Handpiece 11 chisels (A-KC509, A-KC510, A-KC503, A-KC504, A-KC505, A-KC506, A-KC511, A-KC501, A-KC502, A-KC508, and A-KC507. Note: Kit EM-50 is for use with the 1/6 HP Series SR and other universal Foredom motors. Please read the product description for the Foredom No. 50 Handpiece before purchasing (Includes a link to the Foredom No. 50 Maintenance Manual and info on other related products).
Model : K.EM-50 Manufacturer : Foredom
  Foredom No. 50 Chisel (Reciprocating) Handpiece - Plus 11 Chisels and an EMX Seed Control (For TX & LX Series)

$183.95

Foredom No. 50 Chisel (Reciprocating) Handpiece - Plus 11 Chisels and an EMX Seed Control (For TX & LX Series)

Foredom No. 50 Chisel (Reciprocating) Handpiece - Plus 11 Chisels and an EMX Seed Control (For TX & LX Series). Kit EMX-50 is for use with the Series TX permanent magnet motor . Using the new chisel handpiece with the EMX bench top dial speed control is easier than carving with a foot operated control. The EMX control allows you to set and maintain a speed within the desired low end range of between 1,000 and 8,000 rpm.Kit EMX-50 includes: EMX dial speed control Foredom No. 50 Chisel (Reciprocating) Handpiece 11 chisels (A-KC509, A-KC510, A-KC503, A-KC504, A-KC505, A-KC506, A-KC511, A-KC501, A-KC502, A-KC508, and A-KC507. Note: Kit EMX-50 is for use with the TX permanent magnet motor. Please read the product description for the Foredom No. 50 Handpiece before purchasing (Includes a link to the Foredom No. 50 Maintenance Manual and info on other related products).
Model : K.EMX-50 Manufacturer : Foredom
  Foredom No. 50 Chisel (Reciprocating) Handpiece - Plus 6 Piece Chisel (AKHK550) at One Low Price

Foredom No. 50 Chisel (Reciprocating) Handpiece - Plus 6 Piece Chisel (AKHK550) at One Low Price

Foredom's No. 50 chisel (reciprocating) handpiece gives a power assist to carving projects in all types of wood, plastic and plaster. Similar in appearance to the popular 44T, this handpiece has a contoured body design that features a rugged plastic barrel and tapered aluminum ends. This easy to maintain chisel handpiece is recommended for use with the 1/3 HP Series TX or 1/6 HP Series SR motors, and attaches to any flex shaft machine with a standard key tip shaft (This would excluce the "Heavy Duty" units, such as TXH, SXH, or LXH). Check out our Foredom Motor Units category for more info. NOTE: Please read the product description for the Foredom No. 50 Handpiece before purchasing (Includes a link to the Foredom No. 50 Maintenance Manual and info on other related products). The H.50C Kit combines the Foredom No. 50 Handpiece with the AKHK550 6 piece chisel set for additional savings. The H.50C Kit includes the following: Foredom No. 50 Handpiece A-KC503 A-KC504 A-KC505 A-KC506 A-KC509 A-KC51
Model : H.50C Manufacturer : Foredom
  Reciprocating Chisel -Set- by Foredom - AK510 Chisel Set in Canvas Pouch 12 Piece for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer)

Reciprocating Chisel -Set- by Foredom - AK510 Chisel Set in Canvas Pouch 12 Piece for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer)

Reciprocating Chisel -Set- by Foredom - AK510 Chisel Set in Canvas Pouch 12 Piece . Includes A-KC501, A-KC502, A-KC503, A-KC504, A-KC505, A-KC506, A-KC507, A-KC508, A-KC509, A-KC510, A-KC511, and A-KC515 chisels for use in Foredom's No. 50 Chisel Handpiece. Tools are consolidated in a Canvas Pouch A-KC500. These pre-sharpened, quality steel cutting blades are produced by Foredom, and are especially designed for the Foredom No. 50 Chisel (Reciprocating) Handpiece. These blades will work in some other reciprocators, including the Proxxon Motorized Power Carver SGM (Reciprocator), and Wecheer. For an overview of blade compatibility among various reciprocators, please visit our Reciprocating Tool Reference Chart. Don't forget, Flexcut RG Series reciprocating gouges, chisels, and cutters will also work in the Foredom No. 50 Handpiece.
Model : AK510 Manufacturer : Foredom
  Reciprocating Chisel -Set- by Foredom - AKHK550 Chisel Set 6 Piece for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer)

Reciprocating Chisel -Set- by Foredom - AKHK550 Chisel Set 6 Piece for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer)

Reciprocating Chisel -Set- by Foredom - AKHK550 Chisel Set 6 Piece. Includes A-KC503, A-KC504, A-KC505, A-KC506, A-KC509, and A-KC510 chisels for use in Foredom's No. 50 Chisel Handpiece. These pre-sharpened, quality steel cutting blades are produced by Foredom, and are especially designed for the Foredom No. 50 Chisel (Reciprocating) Handpiece. These blades will work in some other reciprocators, including the Proxxon Motorized Power Carver SGM (Reciprocator), and Wecheer. For an overview of blade compatibility among various reciprocators, please visit our Reciprocating Tool Reference Chart. Don't forget, Flexcut RG Series reciprocating gouges, chisels, and cutters will also work in the Foredom No. 50 Handpiece.
Model : AKHK550 Manufacturer : Foredom
  Reciprocating Chisel -Set- by Foredom - AKHK560 Chisel Set 5 Piece for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer)

Reciprocating Chisel -Set- by Foredom - AKHK560 Chisel Set 5 Piece for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer)

Reciprocating Chisel -Set- by Foredom - AKHK560 Chisel Set 5 Piece. Includes A-KC501, A-KC502, A-KC507, A-KC508, and A-KC511 chisels for use in Foredom's No. 50 Chisel Handpiece. These pre-sharpened, quality steel cutting blades are produced by Foredom, and are especially designed for the Foredom No. 50 Chisel (Reciprocating) Handpiece. These blades will work in some other reciprocators, including the Proxxon Motorized Power Carver SGM (Reciprocator), and Wecheer. For an overview of blade compatibility among various reciprocators, please visit our Reciprocating Tool Reference Chart. Don't forget, Flexcut RG Series reciprocating gouges, chisels, and cutters will also work in the Foredom No. 50 Handpiece.
Model : AKHK560 Manufacturer : Foredom
  Reciprocating Chisel -Set- by Foredom - AKHK570 Chisel Set 6 Piece for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer)

Reciprocating Chisel -Set- by Foredom - AKHK570 Chisel Set 6 Piece for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer)

Reciprocating Chisel -Set- by Foredom - AKHK570 Chisel Set 6 Piece. Includes A-KC512, A-KC513, A-KC514, A-KC515, A-KC516, and A-KC517 chisels for use in Foredom's No. 50 Chisel Handpiece. These pre-sharpened, quality steel cutting blades are produced by Foredom, and are especially designed for the Foredom No. 50 Chisel (Reciprocating) Handpiece. These blades will work in some other reciprocators, including the Proxxon Motorized Power Carver SGM (Reciprocator), and Wecheer. For an overview of blade compatibility among various reciprocators, please visit our Reciprocating Tool Reference Chart. Don't forget, Flexcut RG Series reciprocating gouges, chisels, and cutters will also work in the Foredom No. 50 Handpiece.
Model : AKHK570 Manufacturer : Foredom
  Reciprocating Chisel -Set- by Foredom - AKHK580 Chisel Set 5 Piece for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer)

Reciprocating Chisel -Set- by Foredom - AKHK580 Chisel Set 5 Piece for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer)

Reciprocating Chisel -Set- by Foredom - AKHK580 Chisel Set 5 Piece. Includes A-KC717, A-KC718, A-KC721, A-KC722, and A-KC723, chisels for use in Foredom's No. 50 Chisel Handpiece. These pre-sharpened, quality steel cutting blades are produced by Foredom, and are especially designed for the Foredom No. 50 Chisel (Reciprocating) Handpiece. These blades will work in some other reciprocators, including the Proxxon Motorized Power Carver SGM (Reciprocator), and Wecheer. For an overview of blade compatibility among various reciprocators, please visit our Reciprocating Tool Reference Chart. Don't forget, Flexcut RG Series reciprocating gouges, chisels, and cutters will also work in the Foredom No. 50 Handpiece.
Model : AKHK580 Manufacturer : Foredom
  Reciprocating Chisel Pouch by Foredom - A-KC500 Canvas Pouch for Fordom chisels

Reciprocating Chisel Pouch by Foredom - A-KC500 Canvas Pouch for Fordom chisels

Reciprocating Chisel Pouch by Foredom - A-KC500 Canvas Pouch for Fordom chisels . Canvas Pouch with slots for holding 12 Foredom chisels. Has silk screened Foredom logo in deep blue on front panel. Measures 9-3/4" x 7" open and folds to 4-3/4" x 3-1/2". Closes with covered Velcro strap.
Model : A-KC500 Manufacturer : Foredom
  Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - #11 x 3.5mm - #11 Sweep A-KC505

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - #11 x 3.5mm - #11 Sweep A-KC505

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - #11 x 3.5mm - #11 Sweep A-KC505. Overall length (from cutting edge to end of tang)- 75mm Tang length- 18mm This pre-sharpened, quality steel cutting blade is produced by Foredom, and are especially designed for the Foredom No. 50 Chisel (Reciprocating) Handpiece. These blades will work in some other reciprocators, including the Proxxon Motorized Power Carver SGM (Reciprocator), and Wecheer. For an overview of blade compatibility among various reciprocators, please visit our Reciprocating Tool Reference Chart. Don't forget, Flexcut RG Series reciprocating gouges, chisels, and cutters will also work in the Foredom No. 50 Handpiece.
Model : A-KC505 Manufacturer : Foredom
  Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - #9 x 14mm - #9 Sweep A-KC723

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - #9 x 14mm - #9 Sweep A-KC723

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - #9 x 14mm - #9 Sweep A-KC723. Overall length (from cutting edge to end of tang)- 75mm Tang length- 18mm This pre-sharpened, quality steel cutting blade is produced by Foredom, and are especially designed for the Foredom No. 50 Chisel (Reciprocating) Handpiece. These blades will work in some other reciprocators, including the Proxxon Motorized Power Carver SGM (Reciprocator), and Wecheer. For an overview of blade compatibility among various reciprocators, please visit our Reciprocating Tool Reference Chart. Don't forget, Flexcut RG Series reciprocating gouges, chisels, and cutters will also work in the Foredom No. 50 Handpiece.
Model : A-KC723 Manufacturer : Foredom
  Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - #9 x 6mm - #9 Sweep A-KC517

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - #9 x 6mm - #9 Sweep A-KC517

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - #9 x 6mm - #9 Sweep A-KC517. Overall length (from cutting edge to end of tang)- 75mm Tang length- 18mm This pre-sharpened, quality steel cutting blade is produced by Foredom, and are especially designed for the Foredom No. 50 Chisel (Reciprocating) Handpiece. These blades will work in some other reciprocators, including the Proxxon Motorized Power Carver SGM (Reciprocator), and Wecheer. For an overview of blade compatibility among various reciprocators, please visit our Reciprocating Tool Reference Chart. Don't forget, Flexcut RG Series reciprocating gouges, chisels, and cutters will also work in the Foredom No. 50 Handpiece.
Model : A-KC517 Manufacturer : Foredom
  Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - #9 x 9mm - #9 Sweep A-KC514

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - #9 x 9mm - #9 Sweep A-KC514

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - #9 x 9mm - #9 Sweep A-KC514. Overall length (from cutting edge to end of tang)- 75mm Tang length- 18mm This pre-sharpened, quality steel cutting blade is produced by Foredom, and are especially designed for the Foredom No. 50 Chisel (Reciprocating) Handpiece. These blades will work in some other reciprocators, including the Proxxon Motorized Power Carver SGM (Reciprocator), and Wecheer. For an overview of blade compatibility among various reciprocators, please visit our Reciprocating Tool Reference Chart. Don't forget, Flexcut RG Series reciprocating gouges, chisels, and cutters will also work in the Foredom No. 50 Handpiece.
Model : A-KC514 Manufacturer : Foredom
  Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - 110 degree x 11mm Parting Tool A-KC513

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - 110 degree x 11mm Parting Tool A-KC513

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - 110 degree x 11mm Parting Tool A-KC513. Overall length (from cutting edge to end of tang)- 75mm Tang length- 18mm This pre-sharpened, quality steel cutting blade is produced by Foredom, and are especially designed for the Foredom No. 50 Chisel (Reciprocating) Handpiece. These blades will work in some other reciprocators, including the Proxxon Motorized Power Carver SGM (Reciprocator), and Wecheer. For an overview of blade compatibility among various reciprocators, please visit our Reciprocating Tool Reference Chart. Don't forget, Flexcut RG Series reciprocating gouges, chisels, and cutters will also work in the Foredom No. 50 Handpiece.
Model : A-KC513 Manufacturer : Foredom
  Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - 110 degree x 16mm Parting Tool A-KC722

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - 110 degree x 16mm Parting Tool A-KC722

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - 110 degree x 16mm Parting Tool A-KC722. Overall length (from cutting edge to end of tang)- 75mm Tang length- 18mm This pre-sharpened, quality steel cutting blade is produced by Foredom, and are especially designed for the Foredom No. 50 Chisel (Reciprocating) Handpiece. These blades will work in some other reciprocators, including the Proxxon Motorized Power Carver SGM (Reciprocator), and Wecheer. For an overview of blade compatibility among various reciprocators, please visit our Reciprocating Tool Reference Chart. Don't forget, Flexcut RG Series reciprocating gouges, chisels, and cutters will also work in the Foredom No. 50 Handpiece.
Model : A-KC722 Manufacturer : Foredom
  Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - 110 degree x 7mm Parting Tool A-KC516

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - 110 degree x 7mm Parting Tool A-KC516

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - 110 degree x 7mm Parting Tool A-KC516. Overall length (from cutting edge to end of tang)- 75mm Tang length- 18mm This pre-sharpened, quality steel cutting blade is produced by Foredom, and are especially designed for the Foredom No. 50 Chisel (Reciprocating) Handpiece. These blades will work in some other reciprocators, including the Proxxon Motorized Power Carver SGM (Reciprocator), and Wecheer. For an overview of blade compatibility among various reciprocators, please visit our Reciprocating Tool Reference Chart. Don't forget, Flexcut RG Series reciprocating gouges, chisels, and cutters will also work in the Foredom No. 50 Handpiece.
Model : A-KC516 Manufacturer : Foredom
  Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - 70 degree x 5.5mm Parting Tool A-KC506

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - 70 degree x 5.5mm Parting Tool A-KC506

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - 70 degree x 5.5mm Parting Tool A-KC506. Overall length (from cutting edge to end of tang)- 75mm Tang length- 18mm This pre-sharpened, quality steel cutting blade is produced by Foredom, and are especially designed for the Foredom No. 50 Chisel (Reciprocating) Handpiece. These blades will work in some other reciprocators, including the Proxxon Motorized Power Carver SGM (Reciprocator), and Wecheer. For an overview of blade compatibility among various reciprocators, please visit our Reciprocating Tool Reference Chart. Don't forget, Flexcut RG Series reciprocating gouges, chisels, and cutters will also work in the Foredom No. 50 Handpiece.
Model : A-KC506 Manufacturer : Foredom
  Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - 75 degree x 12mm Parting Tool A-KC717

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - 75 degree x 12mm Parting Tool A-KC717

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - 75 degree x 12mm Parting Tool A-KC717. Overall length (from cutting edge to end of tang)- 75mm Tang length- 18mm This pre-sharpened, quality steel cutting blade is produced by Foredom, and are especially designed for the Foredom No. 50 Chisel (Reciprocating) Handpiece. These blades will work in some other reciprocators, including the Proxxon Motorized Power Carver SGM (Reciprocator), and Wecheer. For an overview of blade compatibility among various reciprocators, please visit our Reciprocating Tool Reference Chart. Don't forget, Flexcut RG Series reciprocating gouges, chisels, and cutters will also work in the Foredom No. 50 Handpiece.
Model : A-KC717 Manufacturer : Foredom
  Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - #1 x 14.5mm - #1 Sweep Single Bevel A-KC511

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - #1 x 14.5mm - #1 Sweep Single Bevel A-KC511

Reciprocating Power Chisel for Foredom No. 50 Handpiece (Also, Proxxon & WeCheer) - #1 x 14.5mm - #1 Sweep Single Bevel A-KC511. Overall length (from cutting edge to end of tang)- 55mm Tang length- 18mm This pre-sharpened, quality steel cutting blade is produced by Foredom, and are especially designed for the Foredom No. 50 Chisel (Reciprocating) Handpiece. These blades will work in some other reciprocators, including the Proxxon Motorized Power Carver SGM (Reciprocator), and Wecheer. For an overview of blade compatibility among various reciprocators, please visit our Reciprocating Tool Reference Chart. Don't forget, Flexcut RG Series reciprocating gouges, chisels, and cutters will also work in the Foredom No. 50 Handpiece.
Model : A-KC511 Manufacturer : Foredom