Attachments



  Foredom 4561 Tapered Spindle Adapter, Right Side

Retail Price: $2.10
You save: $0.21  (10%)
Our Price: $1.89

Foredom 4561 Tapered Spindle Adapter, Right Side

Foredom A-4561 Tapered Spindle Adapter, Right Side. Use to mount buffs and wheels up to 4" with 3/8" arbor holes onto the right hand side of the BL Lathe. Also for 2" and 3" Scotch-Brite Radial Bristle Discs. Max. Speed Rating: 10,000 RPM. Made in USA.This special adapter was designed and manufactured specifically for using 3M 2" and 3" Radial Bristle Discs on the BL Lathe to buff, clean, and polish work pieces at variable speed up to 7,000 RPM. This adapter mounts on the right hand side of the lathe while the A-4562 Adapter is made for use on the left side. 3M advocates the use of Foredom's BL Lathe with their larger diameter discs. Maximum and recommended speeds depend on the type and size of accessory, as well as the mandrel in use. The ratings we publish for our mandrels are based on an 1" overhang with an accessory that weighs under 1 gram, and is smaller than 1/2" in diameter. As a general rule, smaller accessories and mandrels can be used at higher speeds than larger accessories and mandrels. It is a good idea to follow the recommendations that come with both the accessory and the mandrel you are using.
Model : A-4561 Manufacturer : Foredom
  Foredom 4562 Tapered Spindle Adapter, Left Side

Retail Price: $2.10
You save: $0.21  (10%)
Our Price: $1.89

Foredom 4562 Tapered Spindle Adapter, Left Side

Foredom A-4562 Tapered Spindle Adapter, Left Side. Use to mount buffs and wheels up to 4" with 3/8" arbor holes onto the left hand side of the BL Lathe. Also for 2" and 3" Scotch-Brite Radial Bristle Discs. Max. Speed Rating: 10,000 RPM. Made in USA.This special adapter was designed and manufactured specifically for using 3M 2" and 3" Radial Bristle Discs on the BL Lathe to buff, clean, and polish work pieces at variable speed up to 7,000 RPM. This adapter mounts on the left hand side of the lathe while the A-4561 Adapter is made for use on the right side. 3M advocates the use of Foredom's BL Lathe with their larger diameter discs. Maximum and recommended speeds depend on the type and size of accessory, as well as the mandrel in use. The ratings we publish for our mandrels are based on an 1" overhang with an accessory that weighs under 1 gram, and is smaller than 1/2" in diameter. As a general rule, smaller accessories and mandrels can be used at higher speeds than larger accessories and mandrels. It is a good idea to follow the recommendations that come with both the accessory and the mandrel you are using.
Model : A-4562 Manufacturer : Foredom
  Foredom 4568 FX Wheel Adapter

Retail Price: $5.30
You save: $0.53  (10%)
Our Price: $4.77

Foredom 4568 FX Wheel Adapter

Foredom A-4568 FX Wheel Adapter. Use to mount FX and other Wheels with 1" arbor holes onto either side of the BL Lathe.
Model : A-4568 Manufacturer : Foredom
  Foredom CH4 Collet Holder, Right Side

Retail Price: $30.00
You save: $3.00  (10%)
Our Price: $27.00

Foredom CH4 Collet Holder, Right Side

Foredom A-CHA-4 Collet Holder, Right Side. Comes with three collets for holding 1/4", 1/8" and 3/32" shank accessories. Use on right side of older model BL lathes (prior to 2002) and Nos. 1 5 High Speed Bench Grinders.
Model : A-CHA-4 Manufacturer : Foredom
  Foredom CH5 Collet Holder, Right Side

Retail Price: $30.00
You save: $3.00  (10%)
Our Price: $27.00

Foredom CH5 Collet Holder, Right Side

Foredom A-CHA-5 Collet Holder, Right Side. Comes with three collets for holding accessories with 1/4", 1/8", and 3/32" shanks. Use on right side of current model BL Lathe. Current models of BL Lathes refers to models built in 2002 and later.
Model : A-CHA-5 Manufacturer : Foredom
  Foredom JC1 Chuck Arbor, Right Side

Retail Price: $47.00
You save: $4.70  (10%)
Our Price: $42.30

Foredom JC1 Chuck Arbor, Right Side

Foredom A-JCA-1 Chuck Arbor, Right Side. Adjusts to hold accessories with shanks from 0-5/32". Comes with chuck key. Use on right hand side of older model BL Lathes (prior to 2002) and Nos. 1 5 High Speed Bench Grinders.
Model : A-JCA-1 Manufacturer : Foredom
  Foredom JC2 Chuck Arbor, Right Side

Retail Price: $47.00
You save: $4.70  (10%)
Our Price: $42.30

Foredom JC2 Chuck Arbor, Right Side

Foredom A-JCA-2 Chuck Arbor, Right Side. Adjusts to hold accessories with shanks from 0-5/32". Comes with chuck key. Use on right side of current model BL Lathes. Current models of BL Lathes refers to models built in 2002 and later.
Model : A-JCA-2 Manufacturer : Foredom
  Foredom TM3 Tapered Spindle, Left Side for Older Models

Retail Price: $10.50
You save: $1.05  (10%)
Our Price: $9.45

Foredom TM3 Tapered Spindle, Left Side for Older Models

Foredom A-TM3 Tapered Spindle, Left Side for Older Models. Tapered Spindle for left side of older model BL lathes (prior to 2002) and Nos. 1 5 High Speed Bench Grinders. Older model BL Lathes built 2002 and before have 1/4" motor shafts. Current models have 5/15" motor shafts.
Model : A-TM3 Manufacturer : Foredom
  Foredom TM4 Tapered Spindle,Right Side for Older Models

Retail Price: $10.50
You save: $1.05  (10%)
Our Price: $9.45

Foredom TM4 Tapered Spindle,Right Side for Older Models

Foredom A-TM4 Tapered Spindle,Right Side for Older Models. Tapered Spindle for right side of older model BL lathes (prior to 2002) and Nos. 1 5 High Speed Bench Grinders. Older model BL Lathes built 2002 and before have 1/4" motor shafts. Current models have 5/15" motor shafts.
Model : A-TM4 Manufacturer : Foredom
  Foredom TM5 Tapered Spindle, Left Side

Retail Price: $10.50
You save: $1.05  (10%)
Our Price: $9.45

Foredom TM5 Tapered Spindle, Left Side

Foredom A-TM5 Tapered Spindle, Left Side. Tapered Spindle for left hand side of current models of BL lathes with 5/16" motor shafts. Current models of BL Lathes refers to models built in 2002 and later.
Model : A-TM5 Manufacturer : Foredom
  Foredom TM6 Tapered Spindle, Right Side

Retail Price: $10.50
You save: $1.05  (10%)
Our Price: $9.45

Foredom TM6 Tapered Spindle, Right Side

Foredom A-TM6 Tapered Spindle, Right Side. Tapered Spindle for right hand side of current models of BL lathes with 5/16" motor shaft. Current models of BL Lathes refers to models built in 2002 and later.
Model : A-TM6 Manufacturer : Foredom
  Foredom WM-3 Wheel Mandrel, Left Side

Retail Price: $16.00
You save: $1.60  (10%)
Our Price: $14.40

Foredom WM-3 Wheel Mandrel, Left Side

Foredom A-WM-3 Wheel Mandrel, Left Side. For use on left side of older model BL lathes (prior to 2002) and Nos 1 5 High Speed Bench Grinders. Holds accessories with 1/4" center holes. Wheel Mandrel holds rubber bonded abrasive wheels, grinding stones, sanding drums, brushes and other accessories with 1/4" center mounting holes up to 3/4" thick.
Model : A-WM-3 Manufacturer : Foredom
  Foredom WM-4 Wheel Mandrel, Right Side

Retail Price: $16.00
You save: $1.60  (10%)
Our Price: $14.40

Foredom WM-4 Wheel Mandrel, Right Side

Foredom A-WM-4 Wheel Mandrel, Right Side. For use on right side of older model BL lathes (prior to 2002) and Nos. 1 5 High Speed Bench Grinders. Holds accessories with 1/4" center holes. Wheel Mandrel holds rubber bonded abrasive wheels, grinding stones, sanding drums, brushes and other accessories with 1/4" center mounting holes up to 3/4" thick.
Model : A-WM-4 Manufacturer : Foredom
  Foredom WM-5 Wheel Mandrel, Left Side

Retail Price: $16.00
You save: $1.60  (10%)
Our Price: $14.40

Foredom WM-5 Wheel Mandrel, Left Side

Foredom A-WM-5 Wheel Mandrel, Left Side. For use on left side of current model BL lathes. Holds accessories with 1/4" center holes. Current models of BL Lathes refers to models built in 2002 and later. Wheel Mandrel holds rubber bonded abrasive wheels, grinding stones, sanding drums, brushes and other accessories with 1/4" center mounting holes up to 3/4" thick.
Model : A-WM-5 Manufacturer : Foredom
  Foredom WM-6 Wheel Mandrel, Right Side

Retail Price: $16.00
You save: $1.60  (10%)
Our Price: $14.40

Foredom WM-6 Wheel Mandrel, Right Side

Foredom A-WM-6 Wheel Mandrel, Right Side. For use on right side of current model BL lathes. Holds accessories with 1/4" center holes. Current models of BL Lathes refers to models built in 2002 and later. Wheel Mandrel holds rubber bonded abrasive wheels, grinding stones, sanding drums, brushes and other accessories with 1/4" center mounting holes up to 3/4" thick.
Model : A-WM-6 Manufacturer : Foredom