Igraine Flap Sanders



  Igraine Universal Fit Sander 5/8 inch (16mm) Center - Coarse by King Arthur's Tools

Igraine Universal Fit Sander 5/8 inch (16mm) Center - Coarse by King Arthur's Tools

Igraine Universal Fit Sander 5/8 inch (16mm) Center - Coarse by King Arthur's Tools.  Coarse 24 Grit Flap Disc Sander with 5/8"(16mm) center fits American grinders. An essetial part of the King Arthur's system. IGRAINE® Flap Disc Sanders by King Arthur's Tools are available in three grits. Use Lancelot® and Squire® for mass removal and rough shaping, then use Galahad® or Holey Galahad to smooth down the ridges, Igraine® flap discs for major surface area sanding and finishing, then complete the project with Guinevere® to obtain a super fine velvet touch finish. Apply your liquid or wax finishes after either Igraine® or Guinevere®, depending on your choice of surface grit finish.  Center Hole: Available in a variety of grits and profiles. These 4” (100 mm) diameter sanding discs fit most 4 1/2” (115 mm) angle grinders. Specifications: All models are available with either 5/8” (16mm) centers and some are available with 7/8” (22mm) centers.  Simplify things with the Universal Hex Nut for Galahad Style Accessories, which either size Galahad® accessories to be used by the same grinder.   Don't forget to compare with the "Holey®" Galahad® discs by King Arthur's tools that allow you to virtually SEE THROUG the tool!--Click Here for Holey® Galahad®
Model : 49924 Manufacturer : King Arthur's Tools
  Igraine Universal Fit Sander 5/8 inch (16mm) Center - Fine by King Arthur's Tools

Igraine Universal Fit Sander 5/8 inch (16mm) Center - Fine by King Arthur's Tools

Igraine Universal Fit Sander 5/8 inch (16mm) Center - Fine by King Arthur's Tools. Fine 80 Grit Flap Disc Sander with 5/8"(16mm) center fits American grinders. An essetial part of the King Arthur's system. IGRAINE Flap Disc Sanders by King Arthur's Tools are available in three grits. Use Lancelot and Squire for mass removal and rough shaping, then use Galahad or Holey Galahad to smooth down the ridges, Igraine flap discs for major surface area sanding and finishing, then complete the project with Guinevere to obtain a super fine velvet touch finish. Apply your liquid or wax finishes after either Igraine or Guinevere, depending on your choice of surface grit finish. Center Hole: Available in a variety of grits and profiles. These 4" (100 mm) diameter sanding discs fit most 4 1/2" (115 mm) angle grinders. Specifications: All models are available with either 5/8" (16mm) centers and some are available with 7/8" (22mm) centers. Simplify things with the Universal Hex Nut for Galahad Style Accessories, which either size Galahad accessories to be used by the same grinder. Don't forget to compare with the "Holey" Galahad discs by King Arthur's tools that allow you to virtually SEE THROUG the tool!--Click Here for Holey Galahad
Model : 49980 Manufacturer : King Arthur's Tools
  Igraine Universal Fit Sander 5/8 inch (16mm) Center - Medium by King Arthur's Tools

Igraine Universal Fit Sander 5/8 inch (16mm) Center - Medium by King Arthur's Tools

Igraine Universal Fit Sander 5/8 inch (16mm) Center - Medium by King Arthur's Tools.  Medium 60 Grit Flap Disc Sander with 5/8"(16mm) center fits American grinders.  An essetial part of the King Arthur's system. IGRAINE® Flap Disc Sanders by King Arthur's Tools are available in three grits. Use Lancelot® and Squire® for mass removal and rough shaping, then use Galahad® or Holey Galahad to smooth down the ridges, Igraine® flap discs for major surface area sanding and finishing, then complete the project with Guinevere® to obtain a super fine velvet touch finish. Apply your liquid or wax finishes after either Igraine® or Guinevere®, depending on your choice of surface grit finish.  Center Hole: Available in a variety of grits and profiles. These 4” (100 mm) diameter sanding discs fit most 4 1/2” (115 mm) angle grinders. Specifications: All models are available with either 5/8” (16mm) centers and some are available with 7/8” (22mm) centers.  Simplify things with the Universal Hex Nut for Galahad Style Accessories, which either size Galahad® accessories to be used by the same grinder.   Don't forget to compare with the "Holey®" Galahad® discs by King Arthur's tools that allow you to virtually SEE THROUG the tool!--Click Here for Holey® Galahad®
Model : 49960 Manufacturer : King Arthur's Tools
  Igraine Universal Fit Sander 7/8 inch (22mm) Center - Fine by King Arthur's Tools

Igraine Universal Fit Sander 7/8 inch (22mm) Center - Fine by King Arthur's Tools

Igraine Universal Fit Sander 7/8 inch (22mm) Center - Fine by King Arthur's Tools. Fine 80 Grit Flap Disc Sander with 7/8"(22mm) center. The new 4" x 7/8" (100mm x 22mm) flap disc sanders are exclusive worldwide only to King Arthur s Tools and will conveniently fit all angle grinders from 4-1/2" 115mm to 125mm with a standard 7/8" (22mm) arbor. Both are tightened using the respective 5/8" or 14mm thread Universal Nut. IGRAINE Flap Disc Sanders by King Arthur's Tools are available in three grits. Use Lancelot and Squire for mass removal and rough shaping, then use Galahad or Holey Galahad to smooth down the ridges, Igraine flap discs for major surface area sanding and finishing, then complete the project with Guinevere to obtain a super fine velvet touch finish. Apply your liquid or wax finishes after either Igraine or Guinevere , depending on your choice of surface grit finish. Center Hole: Available in a variety of grits and profiles. These 4" (100 mm) diameter sanding discs fit most 4 1/2" (115 mm) angle grinders. Specifications: All models are available with either 5/8" (16mm) centers and some are available with 7/8" (22mm) centers. Simplify things with the Universal Hex Nut for Galahad Style Accessories, which either size Galahad accessories to be used by the same grinder. Don't forget to compare with the "Holey " Galahad discs by King Arthur's tools that allow you to virtually SEE THROUG the tool!--Click Here for Holey Galahad
Model : 40980 Manufacturer : King Arthur's Tools
  Igraine Universal Fit Sander 7/8 inch (22mm) Center - Medium by King Arthur's Tools

Igraine Universal Fit Sander 7/8 inch (22mm) Center - Medium by King Arthur's Tools

Igraine Universal Fit Sander 7/8 inch (22mm) Center - Medium by King Arthur's Tools. Medium 60 Grit Flap Disc Sander with 7/8"(22mm) center. The new 4" x 7/8" (100mm x 22mm) flap disc sanders are exclusive worldwide only to King Arthur s Tools and will conveniently fit all angle grinders from 4-1/2" 115mm to 125mm with a standard 7/8" (22mm) arbor. Both are tightened using the respective 5/8" or 14mm thread Universal Nut. IGRAINE Flap Disc Sanders by King Arthur's Tools are available in three grits. Use Lancelot and Squire for mass removal and rough shaping, then use Galahad or Holey Galahad to smooth down the ridges, Igraine flap discs for major surface area sanding and finishing, then complete the project with Guinevere to obtain a super fine velvet touch finish. Apply your liquid or wax finishes after either Igraine or Guinevere , depending on your choice of surface grit finish. Center Hole: Available in a variety of grits and profiles. These 4" (100 mm) diameter sanding discs fit most 4 1/2" (115 mm) angle grinders. Specifications: All models are available with either 5/8" (16mm) centers and some are available with 7/8" (22mm) centers. Simplify things with the Universal Hex Nut for Galahad Style Accessories, which either size Galahad accessories to be used by the same grinder. Don't forget to compare with the "Holey " Galahad discs by King Arthur's tools that allow you to virtually SEE THROUG the tool!--Click Here for Holey Galahad
Model : 40960 Manufacturer : King Arthur's Tools
  Igraine Universal Fit Sander 7/8 inch (22mm) Sander - Coarse by King Arthur's Tools

Igraine Universal Fit Sander 7/8 inch (22mm) Sander - Coarse by King Arthur's Tools

Igraine Universal Fit Sander 7/8 inch (22mm) Sander - Coarse by King Arthur's Tools. Coarse 24 Grit Flap Disc Sander with 7/8"(22mm) center. The new 4" x 7/8" (100mm x 22mm) flap disc sanders are exclusive worldwide only to King Arthur s Tools and will conveniently fit all angle grinders from 4-1/2" 115mm to 125mm with a standard 7/8" (22mm) arbor. Both are tightened using the respective 5/8" or 14mm thread Universal Nut. IGRAINE Flap Disc Sanders by King Arthur's Tools are available in three grits. Use Lancelot and Squire for mass removal and rough shaping, then use Galahad or Holey Galahad to smooth down the ridges, Igraine flap discs for major surface area sanding and finishing, then complete the project with Guinevere to obtain a super fine velvet touch finish. Apply your liquid or wax finishes after either Igraine or Guinevere , depending on your choice of surface grit finish. Center Hole: Available in a variety of grits and profiles. These 4" (100 mm) diameter sanding discs fit most 4 1/2" (115 mm) angle grinders. Specifications: All models are available with either 5/8" (16mm) centers and some are available with 7/8" (22mm) centers. Simplify things with the Universal Hex Nut for Galahad Style Accessories, which either size Galahad accessories to be used by the same grinder. Don't forget to compare with the "Holey " Galahad discs by King Arthur's tools that allow you to virtually SEE THROUG the tool!--Click Here for Holey Galahad
Model : 40924 Manufacturer : King Arthur's Tools