Carbide Abrasive Burs



  King Arthur's Tools Carbide Abrasive Drum Burrr & Mandrel (1/4" Shank)

Retail Price: $34.99
You save: $10.00  (29%)
Our Price: $24.99

King Arthur's Tools Carbide Abrasive Drum Burrr & Mandrel (1/4" Shank)

King Arthur's Tools Carbide Abrasive Drum Burrr Mandrel Carbide abrasive burrs fit Die/Air/Flex Shaft Units with 1/4" collets. Achieve different effects using the abrasive burr accessories for texture details. Carbide Cleaning Tips for Galahad and Abrasive BurrsCarbide Galahads and Carbide Abrasive Burrs are easily cleaned with "Easy Off" oven cleaner and a wire brush.Over time and with repeated use, a section of the disc may eventually fill with wood, resin or the material you're working with. When this happens, the teeth become clogged. There are several methods to clean the teeth.Clogging caused by highly resinous or fibrous wood can be brushed out or burned off without damaging the teeth. Tungsten carbide has a melting point of 2800 degrees centigrade, so standard burn-off temperatures aren't going to affect it at all. Make sure you use Vise GripsTM or pliers to keep your hand from the heat when turning a propane torch on these discs and burrs. The shanks and heads transfer heat very rapidly. Use a bronze or brass wire brush to clean up any debris left after burning off the burrs.1. Use a small propane burner (like a camping burner) and apply to disc. Let sit until cool and use a brass or wire brush to remove loosened residue. You will not damage the disc. common sense dictates that you remove the disc from the angle grinder and place on a non-flammable surface prior to burning.2. Another preferred method is to apply paraffin to the disc first then burn as described above.3. Spray "Easy Off" oven cleaner (or similar) onto disc. you can apply directly to the disc while fitted to the disconnected angle grinder but beware, you'll probably also spray the safety guard. Better still, remove the disc, lay on newspaper then spray the oven cleaner. Let sit for about a half hour and remove residue with a brass or wire brush. Repeat as necessary. Foredom HB58 Brass Brush Perfect for cleaning carbide burs and accessories.
Model : 11008 Manufacturer : King Arthur's Tools
  King Arthur's Tools Carbide Abrasive Drum Burrr & Mandrel (6mm Shank)

Retail Price: $34.99
You save: $10.00  (29%)
Our Price: $24.99

King Arthur's Tools Carbide Abrasive Drum Burrr & Mandrel (6mm Shank)

King Arthur's Tools Carbide Abrasive Drum Burrr Mandrel Carbide abrasive burrs fit Die/Air/Flex Shaft Units with 6mm collets. Achieve different effects using the abrasive burr accessories for texture details. Carbide Cleaning Tips for Galahad and Abrasive BurrsCarbide Galahads and Carbide Abrasive Burrs are easily cleaned with "Easy Off" oven cleaner and a wire brush.Over time and with repeated use, a section of the disc may eventually fill with wood, resin or the material you're working with. When this happens, the teeth become clogged. There are several methods to clean the teeth.Clogging caused by highly resinous or fibrous wood can be brushed out or burned off without damaging the teeth. Tungsten carbide has a melting point of 2800 degrees centigrade, so standard burn-off temperatures aren't going to affect it at all. Make sure you use Vise GripsTM or pliers to keep your hand from the heat when turning a propane torch on these discs and burrs. The shanks and heads transfer heat very rapidly. Use a bronze or brass wire brush to clean up any debris left after burning off the burrs.1. Use a small propane burner (like a camping burner) and apply to disc. Let sit until cool and use a brass or wire brush to remove loosened residue. You will not damage the disc. common sense dictates that you remove the disc from the angle grinder and place on a non-flammable surface prior to burning.2. Another preferred method is to apply paraffin to the disc first then burn as described above.3. Spray "Easy Off" oven cleaner (or similar) onto disc. you can apply directly to the disc while fitted to the disconnected angle grinder but beware, you'll probably also spray the safety guard. Better still, remove the disc, lay on newspaper then spray the oven cleaner. Let sit for about a half hour and remove residue with a brass or wire brush. Repeat as necessary. Foredom HB58 Brass Brush Perfect for cleaning carbide burs and accessories.
Model : 11008-6MM Manufacturer : King Arthur's Tools
  King Arthur's Tools Carbide Abrasive Flame Burr (1/4" Shank)

Retail Price: $26.99
You save: $10.00  (37%)
Our Price: $16.99

King Arthur's Tools Carbide Abrasive Flame Burr (1/4" Shank)

King Arthur's Tools Carbide Abrasive Flame Burr. Carbide abrasive burrs fit Die/Air/Flex Shaft Units with 1/4" collets. Achieve different effects using the abrasive burr accessories for texture details. Carbide Cleaning Tips for Galahad and Abrasive BurrsCarbide Galahads and Carbide Abrasive Burrs are easily cleaned with "Easy Off" oven cleaner and a wire brush.Over time and with repeated use, a section of the disc may eventually fill with wood, resin or the material you're working with. When this happens, the teeth become clogged. There are several methods to clean the teeth.Clogging caused by highly resinous or fibrous wood can be brushed out or burned off without damaging the teeth. Tungsten carbide has a melting point of 2800 degrees centigrade, so standard burn-off temperatures aren't going to affect it at all. Make sure you use Vise GripsTM or pliers to keep your hand from the heat when turning a propane torch on these discs and burrs. The shanks and heads transfer heat very rapidly. Use a bronze or brass wire brush to clean up any debris left after burning off the burrs.1. Use a small propane burner (like a camping burner) and apply to disc. Let sit until cool and use a brass or wire brush to remove loosened residue. You will not damage the disc. common sense dictates that you remove the disc from the angle grinder and place on a non-flammable surface prior to burning.2. Another preferred method is to apply paraffin to the disc first then burn as described above.3. Spray "Easy Off" oven cleaner (or similar) onto disc. you can apply directly to the disc while fitted to the disconnected angle grinder but beware, you'll probably also spray the safety guard. Better still, remove the disc, lay on newspaper then spray the oven cleaner. Let sit for about a half hour and remove residue with a brass or wire brush. Repeat as necessary. Foredom HB58 Brass Brush Perfect for cleaning carbide burs and accessories.
Model : 11006 Manufacturer : King Arthur's Tools
  King Arthur's Tools Carbide Abrasive Flame Burr (6mm Shank)

Retail Price: $26.99
You save: $10.00  (37%)
Our Price: $16.99

King Arthur's Tools Carbide Abrasive Flame Burr (6mm Shank)

King Arthur's Tools Carbide Abrasive Flame Burr. Carbide abrasive burrs fit Die/Air/Flex Shaft Units with 6mm collets. Achieve different effects using the abrasive burr accessories for texture details. Carbide Cleaning Tips for Galahad and Abrasive BurrsCarbide Galahads and Carbide Abrasive Burrs are easily cleaned with "Easy Off" oven cleaner and a wire brush.Over time and with repeated use, a section of the disc may eventually fill with wood, resin or the material you're working with. When this happens, the teeth become clogged. There are several methods to clean the teeth.Clogging caused by highly resinous or fibrous wood can be brushed out or burned off without damaging the teeth. Tungsten carbide has a melting point of 2800 degrees centigrade, so standard burn-off temperatures aren't going to affect it at all. Make sure you use Vise GripsTM or pliers to keep your hand from the heat when turning a propane torch on these discs and burrs. The shanks and heads transfer heat very rapidly. Use a bronze or brass wire brush to clean up any debris left after burning off the burrs.1. Use a small propane burner (like a camping burner) and apply to disc. Let sit until cool and use a brass or wire brush to remove loosened residue. You will not damage the disc. common sense dictates that you remove the disc from the angle grinder and place on a non-flammable surface prior to burning.2. Another preferred method is to apply paraffin to the disc first then burn as described above.3. Spray "Easy Off" oven cleaner (or similar) onto disc. you can apply directly to the disc while fitted to the disconnected angle grinder but beware, you'll probably also spray the safety guard. Better still, remove the disc, lay on newspaper then spray the oven cleaner. Let sit for about a half hour and remove residue with a brass or wire brush. Repeat as necessary. Foredom HB58 Brass Brush Perfect for cleaning carbide burs and accessories.
Model : 11006-6MM Manufacturer : King Arthur's Tools
  King Arthur's Tools Carbide Abrasive Sphere Burr (1/4" Shank)

Retail Price: $34.99
You save: $10.00  (29%)
Our Price: $24.99

King Arthur's Tools Carbide Abrasive Sphere Burr (1/4" Shank)

King Arthur's Tools Carbide Abrasive Sphere Burr. Carbide abrasive burrs fit Die/Air/Flex Shaft Units with 1/4" collets. Achieve different effects using the abrasive burr accessories for texture details. Carbide Cleaning Tips for Galahad and Abrasive BurrsCarbide Galahads and Carbide Abrasive Burrs are easily cleaned with "Easy Off" oven cleaner and a wire brush.Over time and with repeated use, a section of the disc may eventually fill with wood, resin or the material you're working with. When this happens, the teeth become clogged. There are several methods to clean the teeth.Clogging caused by highly resinous or fibrous wood can be brushed out or burned off without damaging the teeth. Tungsten carbide has a melting point of 2800 degrees centigrade, so standard burn-off temperatures aren't going to affect it at all. Make sure you use Vise GripsTM or pliers to keep your hand from the heat when turning a propane torch on these discs and burrs. The shanks and heads transfer heat very rapidly. Use a bronze or brass wire brush to clean up any debris left after burning off the burrs.1. Use a small propane burner (like a camping burner) and apply to disc. Let sit until cool and use a brass or wire brush to remove loosened residue. You will not damage the disc. common sense dictates that you remove the disc from the angle grinder and place on a non-flammable surface prior to burning.2. Another preferred method is to apply paraffin to the disc first then burn as described above.3. Spray "Easy Off" oven cleaner (or similar) onto disc. you can apply directly to the disc while fitted to the disconnected angle grinder but beware, you'll probably also spray the safety guard. Better still, remove the disc, lay on newspaper then spray the oven cleaner. Let sit for about a half hour and remove residue with a brass or wire brush. Repeat as necessary. Foredom HB58 Brass Brush Perfect for cleaning carbide burs and accessories.
Model : 11007 Manufacturer : King Arthur's Tools
  King Arthur's Tools Carbide Abrasive Sphere Burr (6mm Shank)

Retail Price: $34.99
You save: $10.00  (29%)
Our Price: $24.99

King Arthur's Tools Carbide Abrasive Sphere Burr (6mm Shank)

King Arthur's Tools Carbide Abrasive Sphere Burr. Carbide abrasive burrs fit Die/Air/Flex Shaft Units with 6mm collets. Achieve different effects using the abrasive burr accessories for texture details. Carbide Cleaning Tips for Galahad and Abrasive BurrsCarbide Galahads and Carbide Abrasive Burrs are easily cleaned with "Easy Off" oven cleaner and a wire brush.Over time and with repeated use, a section of the disc may eventually fill with wood, resin or the material you're working with. When this happens, the teeth become clogged. There are several methods to clean the teeth.Clogging caused by highly resinous or fibrous wood can be brushed out or burned off without damaging the teeth. Tungsten carbide has a melting point of 2800 degrees centigrade, so standard burn-off temperatures aren't going to affect it at all. Make sure you use Vise GripsTM or pliers to keep your hand from the heat when turning a propane torch on these discs and burrs. The shanks and heads transfer heat very rapidly. Use a bronze or brass wire brush to clean up any debris left after burning off the burrs.1. Use a small propane burner (like a camping burner) and apply to disc. Let sit until cool and use a brass or wire brush to remove loosened residue. You will not damage the disc. common sense dictates that you remove the disc from the angle grinder and place on a non-flammable surface prior to burning.2. Another preferred method is to apply paraffin to the disc first then burn as described above.3. Spray "Easy Off" oven cleaner (or similar) onto disc. you can apply directly to the disc while fitted to the disconnected angle grinder but beware, you'll probably also spray the safety guard. Better still, remove the disc, lay on newspaper then spray the oven cleaner. Let sit for about a half hour and remove residue with a brass or wire brush. Repeat as necessary. Foredom HB58 Brass Brush Perfect for cleaning carbide burs and accessories.
Model : 11007-6MM Manufacturer : King Arthur's Tools
  King Arthur's Tools Drum Replacement for 2" Drum Burr (For 14" or 6mm Shank Drum Holder)

Retail Price: $28.99
You save: $10.00  (34%)
Our Price: $18.99

King Arthur's Tools Drum Replacement for 2" Drum Burr (For 14" or 6mm Shank Drum Holder)

King Arthur's Tools Drum Replacement for 2" Drum Burr Carbide abrasive burrs fit Die/Air/Flex Shaft Units with 1/4" collets. Achieve different effects using the abrasive burr accessories for texture details. Carbide Cleaning Tips for Galahad and Abrasive BurrsCarbide Galahads and Carbide Abrasive Burrs are easily cleaned with "Easy Off" oven cleaner and a wire brush.Over time and with repeated use, a section of the disc may eventually fill with wood, resin or the material you're working with. When this happens, the teeth become clogged. There are several methods to clean the teeth.Clogging caused by highly resinous or fibrous wood can be brushed out or burned off without damaging the teeth. Tungsten carbide has a melting point of 2800 degrees centigrade, so standard burn-off temperatures aren't going to affect it at all. Make sure you use Vise GripsTM or pliers to keep your hand from the heat when turning a propane torch on these discs and burrs. The shanks and heads transfer heat very rapidly. Use a bronze or brass wire brush to clean up any debris left after burning off the burrs.1. Use a small propane burner (like a camping burner) and apply to disc. Let sit until cool and use a brass or wire brush to remove loosened residue. You will not damage the disc. common sense dictates that you remove the disc from the angle grinder and place on a non-flammable surface prior to burning.2. Another preferred method is to apply paraffin to the disc first then burn as described above.3. Spray "Easy Off" oven cleaner (or similar) onto disc. you can apply directly to the disc while fitted to the disconnected angle grinder but beware, you'll probably also spray the safety guard. Better still, remove the disc, lay on newspaper then spray the oven cleaner. Let sit for about a half hour and remove residue with a brass or wire brush. Repeat as necessary. Foredom HB58 Brass Brush Perfect for cleaning carbide burs and accessories.
Model : 11014 Manufacturer : King Arthur's Tools