Flexcut Knives



  Flexcut JKN90 Detail Jack Folding Carving Knife

Retail Price: $47.94
You save: $9.99  (21%)
Our Price: $37.95

Flexcut JKN90 Detail Jack Folding Carving Knife

Flexcut JKN90 Detail Jack Folding Carving Knife. Brand New by Flexcut - Preorder today! Should be available by mid-October.The Flexcut JKN90 Detail Jack Folding Woodarving Knife can handle a variety of projects start to finish. Its single detail knife quickly removes wood from convex surfaces, while its fine point is perfect for detailing delicate areas. The Pistol-Grip handle design is crafted from aerospace-grace aluminum and is ergonomically designed to allow a strong grip for long periods of carving with minimal hand fatique.
Model : JKN90 Manufacturer : Flexcut
  Flexcut JKN91 Carvin' Jack (RIGHT HAND) - Folding Pocket Knife for Wood Carving

Retail Price: $175.14
You save: $36.49  (21%)
Our Price: $138.65

Flexcut JKN91 Carvin' Jack (RIGHT HAND) - Folding Pocket Knife for Wood Carving

Flexcut JKN91 Carvin' Jack (RIGHT HAND) Folding Pocket Knife for Wood Carving The handedness (right or left) of the knife should be chosen by how you carve, not necessarily by if you are left or right handed. Choose a right-handed knife if you are right handed and carve with the blade towards you. If you carve away from yourself, choose a left-handed knife. Left-handers should choose the inverse. Flexcut's folding multi-tools are designed for wood carvers and general woodworking. Their unique locking device allows for other than flat straight blades to be locked in place. Each knife comes with sharpening kit, instructions and leather sheath. Profiles include: 70? x 1/4 Scorp V-tool 3/8" Scorp #11 Sweep x 3/16" Gouge 7/8" Hook Knife 3/16" Chisel 1 3/8" Detail Knife
Model : JKN91 Manufacturer : Flexcut
  Flexcut JKN91L Carvin' Jack (LEFT HAND) - Folding Pocket Knife for Wood Carving

Retail Price: $175.14
You save: $36.49  (21%)
Our Price: $138.65

Flexcut JKN91L Carvin' Jack (LEFT HAND) - Folding Pocket Knife for Wood Carving

Flexcut JKN91L Carvin' Jack (LEFT HAND) Folding Pocket Knife for Wood Carving The handedness (right or left) of the knife should be chosen by how you carve, not necessarily by if you are left or right handed. Choose a right-handed knife if you are right handed and carve with the blade towards you. If you carve away from yourself, choose a left-handed knife. Left-handers should choose the inverse. Flexcut's folding multi-tools are designed for wood carvers and general woodworking. Their unique locking device allows for other than flat straight blades to be locked in place. Each knife comes with sharpening kit, instructions and leather sheath. Profiles include: 70 x 1/4 Scorp V-tool 3/8" Scorp #11 Sweep x 3/16" Gouge 7/8" Hook Knife 3/16" Chisel 1 3/8" Detail Knife
Model : JKN91L Manufacturer : Flexcut
  Flexcut JKN95 Tri-Jack Pro

Retail Price: $107.94
You save: $22.49  (21%)
Our Price: $85.45

Flexcut JKN95 Tri-Jack Pro

Flexcut JKN95 Tri-Jack Pro for wood carving. Brand New by Flexcut - Preorder today! Should be available by mid-October.The Flexcut JK95 Tri-Jack Pro for woodcarving is the newest multitool in Flexcut's Carvin' Jack series. As its name suggests, the Tri-Jack has three blades that lock in place - a roughing knife, a detail knife, and a mini-cutting knife. The roughing knife is great for modeling surfaces and creating texture, while the detail and cutting knifes let you easily make the finest cuts. The Pistol-Grip design minimizes hand fatigue and is made of aerospace-grade aluminum with a quarter cut cherry inlay. Makes a great gift!
Model : JKN95 Manufacturer : Flexcut
  Flexcut KN00 4 Piece Knife Roll - designed for Flexcut Knives

Retail Price: $12.30
You save: $2.56  (21%)
Our Price: $9.74

Flexcut KN00 4 Piece Knife Roll - designed for Flexcut Knives

Flexcut KN00 4 Piece Knife Roll - designed for Flexcut Knives. This tool roll will accept up to 4 Flexcut knives to protect the edges.Each carving knive is constructed with an ash handle and a high carbon steel blade. The high carbon blade holds an edge extremely well and is easily maintained by simple stropping. Each blade is honed, polished and ready to go. The mini-knives have a smaller, faceted handle designed for multiple gripping styles.
Model : KN00 Manufacturer : Flexcut
  Flexcut KN11 Skew Knife

Retail Price: $20.70
You save: $4.31  (21%)
Our Price: $16.39

Flexcut KN11 Skew Knife

Skew carving knife is used for taking more vertical cuts where room is limited for a conventional whittling stroke. Each carving knive is constructed with an ash handle and a high carbon steel blade. The high carbon blade holds an edge extremely well and is easily maintained by simple stropping. Each blade is honed, polished and ready to go.
Model : KN11 Manufacturer : Flexcut
  Flexcut KN115 Chip Carving Set

Retail Price: $68.34
You save: $14.24  (21%)
Our Price: $54.10

Flexcut KN115 Chip Carving Set

Flexcut KN115 Chip Carving Set. Flexcut's Chip Carving Set features thier Chip Carving Knife, Mini-Chip Knife and Skew Knife. Everything you need to create the intricate geometric or freestyle patterns that are the hallmark of the craft. Lettering is also very much part of the art form. So carving the name of somebody special on the boxes, address blocks, wall plaques and other objects you make, turns them into very personal keepsakes that can be cherished and even handed down generation to generation.
Model : KN115 Manufacturer : Flexcut
  Flexcut KN15 Chip Carving Knife

Retail Price: $24.42
You save: $5.09  (21%)
Our Price: $19.33

Flexcut KN15 Chip Carving Knife

This is Flexcut's traditional chip carving knife. It is honed, polished and ready to carve.Each carving knive is constructed with an ash handle and a high carbon steel blade. The high carbon blade holds an edge extremely well and is easily maintained by simple stropping. Each blade is honed, polished and ready to go.
Model : KN15 Manufacturer : Flexcut
  Flexcut KN150 Right-Handed Scorp Set

Retail Price: $116.22
You save: $24.21  (21%)
Our Price: $92.01

Flexcut KN150 Right-Handed Scorp Set

Flexcut KN150 Right-Handed Scorp Set These knives are essentially right-angled gouges designed for carving areas where the full length of a conventional gouge will not fit. Knife carvers will find them useful for hollowing deep or narrow cavities. The handedness (right or left) of the knife should be chosen by how you carve, not necessarily by if you are left or right handed. Choose a right-handed knife if you are right handed and carve with the blade towards you. If you carve away from yourself, choose a left-handed knife. Left-handers should choose the inverse. Our new Scorp set puts all of our profiles into one handy tool roll. As an added bonus each set includes a specially shaped strop to help maintain the edge of these unusually shaped tools. (Flexcut Gold Polishing Compou needed for strop sharpening NOT included) Right-handed carvers - choose a right-handed tool to cut towards you - choose a left-handed tool to cut away from For the Items Included in this Set
Model : KN150 Manufacturer : Flexcut
  Flexcut KN16 5" Draw Knife w/sheath

Retail Price: $55.14
You save: $11.49  (21%)
Our Price: $43.65

Flexcut KN16 5" Draw Knife w/sheath

Flexcut KN16 5" Draw Knife w/sheath. Flexcut's flexible draw knife has 5 inches of workable edge, designed to flex around contours where large amounts of stock need to be removed quickly. The tool can be flexed to accommodate concave or convex surfaces. Cuts can be made that conform more closely to the finished shape, taking less time to sand or scrape. The curved edge gives a skew-like cutting action for a low resistance cut. This tool works great for carving chair legs, hollowing chair bottoms or quickly roughing-out decoys.
Model : KN16 Manufacturer : Flexcut
  Flexcut KN17 1" Mini Draw Knife

Retail Price: $34.26
You save: $7.14  (21%)
Our Price: $27.12

Flexcut KN17 1" Mini Draw Knife

This miniature draw knife is designed for hard-to-reach areas, where a pulling action is more conducive to efficient stock removal. The flexible shank allows the cutting angle to be changed easily for contoured cuts.
Model : KN17 Manufacturer : Flexcut
  Flexcut KN19 Mini Pelican Knife

Retail Price: $30.54
You save: $6.36  (21%)
Our Price: $24.18

Flexcut KN19 Mini Pelican Knife

Flexcut's mini-pelican knives offers the same features as its larger bother (KN18) only with a 7/8" ultra thin blade for the lowest resistance when fine cutting is required. The smaller handle is faceted with multiple control points to allow them to be held in a variety of comfortable positions. Each carving knive is constructed with an ash handle and a high carbon steel blade. The high carbon blade holds an edge extremely well and is easily maintained by simple stropping. Each blade is honed, polished and ready to go. Get this knife in the Value Saving Flexcut KN100 Knife Set
Model : KN19 Manufacturer : Flexcut
  Flexcut KN20 Mini Chip Knife

Retail Price: $28.14
You save: $5.86  (21%)
Our Price: $22.28

Flexcut KN20 Mini Chip Knife

The mini-chip carving knife has a 5/8" ultra thin blade, making unwanted chipping in delicate cuts less likely. The smaller handle is faceted with multiple control points to allow them to be held in a variety of comfortable positions. Each carving knive is constructed with an ash handle and a high carbon steel blade. The high carbon blade holds an edge extremely well and is easily maintained by simple stropping. Each blade is honed, polished and ready to go.
Model : KN20 Manufacturer : Flexcut
  Flexcut KN21 Right-Handed Scorp Knife 1/8" (3mm)

Retail Price: $31.74
You save: $6.61  (21%)
Our Price: $25.13

Flexcut KN21 Right-Handed Scorp Knife 1/8" (3mm)

Flexcut KN21 Right-Handed Scorp - 1/8"(3mm). Right-handed carvers - choose a right-handed tool to cut towards you - choose a left-handed tool to cut away from you. Scorp knives are essentially right-angled gouges designed for carving areas where the full length of a conventional gouge will not fit. Knife carvers will find them useful for hollowing deep or narrow cavities. The handedness (right or left) of the knife should be choosen by how you carve, not necessarily by if you are left or right handed. Choose a right-handed knive if you are right handed and carve with the blade towards you. If you carve away from yourself, choose a left-handed knife. Left-handers should choose the inverse. Get all 4 Right-Handed Scorp knives at one low price, PLUS a free tool roll and sharpening stop with the Flexcut KN150 Right-Handed Scorp Set
Model : KN21 Manufacturer : Flexcut
  Flexcut KN22 Right-Handed Scorp 3/16" (5mm)

Retail Price: $31.74
You save: $6.61  (21%)
Our Price: $25.13

Flexcut KN22 Right-Handed Scorp 3/16" (5mm)

Flexcut KN22 Right-Handed Scorp 3/16" (5mm). Right-handed carvers - choose a right-handed tool to cut towards you - choose a left-handed tool to cut away from you. Scorp knives are essentially right-angled gouges designed for carving areas where the full length of a conventional gouge will not fit. Knife carvers will find them useful for hollowing deep or narrow cavities. The handedness (right or left) of the knife should be choosen by how you carve, not necessarily by if you are left or right handed. Choose a right-handed knive if you are right handed and carve with the blade towards you. If you carve away from yourself, choose a left-handed knife. Left-handers should choose the inverse. Get all 4 Right-Handed Scorp knives at one low price, PLUS a free tool roll and sharpening stop with the Flexcut KN150 Right-Handed Scorp Set
Model : KN22 Manufacturer : Flexcut
  Flexcut KN23 Right-Handed Scorp 5/16" (8mm)

Retail Price: $31.74
You save: $6.61  (21%)
Our Price: $25.13

Flexcut KN23 Right-Handed Scorp 5/16" (8mm)

Flexcut KN23 Right-Handed Scorp 5/16" (8mm). Right-handed carvers - choose a right-handed tool to cut towards you - choose a left-handed tool to cut away from you. Scorp knives are essentially right-angled gouges designed for carving areas where the full length of a conventional gouge will not fit. Knife carvers will find them useful for hollowing deep or narrow cavities. The handedness (right or left) of the knife should be choosen by how you carve, not necessarily by if you are left or right handed. Choose a right-handed knive if you are right handed and carve with the blade towards you. If you carve away from yourself, choose a left-handed knife. Left-handers should choose the inverse. Get all 4 Right-Handed Scorp knives at one low price, PLUS a free tool roll and sharpening stop with the Flexcut KN150 Right-Handed Scorp Set
Model : KN23 Manufacturer : Flexcut
  Flexcut KN250 Deluxe Knife Set - 18 Piece

Retail Price: $455.94
You save: $94.99  (21%)
Our Price: $360.95

Flexcut KN250 Deluxe Knife Set - 18 Piece

Flexcut KN250 Deluxe Knife Set - 18 Piece. Our Deluxe Knife Set features the most extensive collection of fixed blade carving knives in the industry to give carvers a wide range of capabilities in one economical package. This set includes 18 razor-sharp carving knives designed for roughing to very detailed carving projects. Knives included: KN11 Skew Knife, KN12 Cutting Knife, KN13 Detail Knife, KN14 Roughing Knife, KN15 Chip Carving Knife, KN18 Pelican Knife, KN19 Mini-Pelican Knife, KN20 Mini-Chip Knife, KN26 Right-Handed Hook Knife, KN27 Mini-Detail Knife, KN28 Upsweep Knife, KN31 Mini-Detail Skew Knife, KN32 Detail Skew Knife, KN33 Hooked Push Knife, KN34 Skewed Detail Knife, KN35 Fine Detail Knife, KN36 Radius Knife, KN37 Hooked Skew Knife.
Model : KN250 Manufacturer : Flexcut
  Flexcut KN26 Hook Knife Right-Handed

Retail Price: $34.26
You save: $7.14  (21%)
Our Price: $27.12

Flexcut KN26 Hook Knife Right-Handed

The hook knive blade is curved, similar to a gouge for working in hollows with ease and fast stock removal. The handedness (right or left) is designated by pulling the tool toward you. Each carving knive is constructed with an ash handle and a high carbon steel blade. The high carbon blade holds an edge extremely well and is easily maintained by simple stropping. Each blade is honed, polished and ready to go.
Model : KN26 Manufacturer : Flexcut
  Flexcut KN300 Whittler's Kit

Retail Price: $53.94
You save: $11.24  (21%)
Our Price: $42.70

Flexcut KN300 Whittler's Kit

Flexcut KN300 Whittler's Kit. Whether you whittle professionally or just for fun, Flexcut's whittling knives will give you better results. These flexible knives are made with edge-holding steel for smoother cutting. Each kit includes a KN13 Detail Knife, KN27 Mini-Detail Knife and a bar of Flexcut Gold polishing compound.
Model : KN300 Manufacturer : Flexcut
  Flexcut KN31 Detail Skew Knife

Retail Price: $32.34
You save: $6.74  (21%)
Our Price: $25.60

Flexcut KN31 Detail Skew Knife

Flexcut KN31 Detail Skew Knife for wood carving. Brand New by Flexcut - Preorder today! Should be available by mid-October.This unique carving knife is contructed with an Ash handle and a high carbon steel blade. The high carbon blade holds an edge extremely well and it easily maintained by simple stropping. Each blade is honed, polished and ready to go. Made in the USA,
Model : KN31 Manufacturer : Flexcut