Robert Larson Sets



  Set of 5 Miniature Turning Tools by Robert Larson

$106.95

Set of 5 Miniature Turning Tools by Robert Larson

Set of 5 Miniature Turning Tools by Robert Larson. If you enjoy doing smaller work, or take a great deal of time turning details on larger work, this will be an essential set of five tools. Includes 1/8 inch spindle gouge, 1/4 inch spindle gouge, 1.4 inch skew chisel, 2mm parting tool, and 1.4 inch round nose scraper. Robert Larson Turning Tool Sets are a great way to begin your turning tool collection. As you become more involved in turning, simply add tools from the wide range of available turning tool profiles and accessories. Robert Larson turning tools are manufactured to the highest quality. About these quality tools: The Blades: The most important issue in a well designed turning tool is the quality of the blade. All Robert Larson blades are manufactured to precise specifications. The steel is M2 molybdenum based high speed steel which is machined from the solid in most cases. A few tools are entirely forged into shape. Next the tool is heat treated, being hardened and tempered to sixty-two degrees on the Rockwell "C" scale. By no means is this the end of the manufacturing process, as the blades are next machine ground as well. The cutting edge is carefully ground, with this being followed by hand glazing and polishing of the tool surface. Polishing is linear to the blade length, unlike other manufacturers that leave circular polishing markings on the blade. In the case of fluted tools, polishing is accomplished with specially shaped abrasive impregnated rubber wheels. A thorough quality inspection is made on each and every tool before it is proudly marked HSS Steel (High Speed Steel). Made in Sheffield England. The Handles: While the blades may be the most important part of a woodturning tool, the handle can make a tremendous difference in the accuracy of your turning as well as how long you can turn before getting tired. Robert Larson turning tool handles were designed in consultation with a leading woodturning company (established over a century ago) to provide both a firm as well as comfortable grip that will let you do your best work for hours on end! The handle starts with a blank of quality ash wood which is shaped into a unique style with beaded grips. While other manufacturers will apply a lacquer finish to the handle, our handles have an oil finish which provides a firmer grip. A solid brass sleeve is mounted on the front of the handle to strengthen the fitting of the blade tank into the handle. Each tool has been given the best size handle for the job.
Model : 920-0300 Manufacturer : Robert Larson
  Set of Eight Robert Larson Turning Tools

$350.95

Set of Eight Robert Larson Turning Tools

Set of Eight Robert Larson Turning Tools. This set will allow you to undertake a variety of scraping and cutting operations. Includes 1/4 inch spindle gouge, 1/2 inch spindle gouge, 3/4 inch roughing out gouge, 1/2 inch skew chisel, 1 inch skew chisel, 1/4 inch parting tool, 3/4 inch round nose scraper, and 1 inch square nose scraper. Robert Larson Turning Tool Sets are a great way to begin your turning tool collection. As you become more involved in turning, simply add tools from the wide range of available turning tool profiles and accessories. Robert Larson turning tools are manufactured to the highest quality. About these quality tools: The Blades: The most important issue in a well designed turning tool is the quality of the blade. All Robert Larson blades are manufactured to precise specifications. The steel is M2 molybdenum based high speed steel which is machined from the solid in most cases. A few tools are entirely forged into shape. Next the tool is heat treated, being hardened and tempered to sixty-two degrees on the Rockwell "C" scale. By no means is this the end of the manufacturing process, as the blades are next machine ground as well. The cutting edge is carefully ground, with this being followed by hand glazing and polishing of the tool surface. Polishing is linear to the blade length, unlike other manufacturers that leave circular polishing markings on the blade. In the case of fluted tools, polishing is accomplished with specially shaped abrasive impregnated rubber wheels. A thorough quality inspection is made on each and every tool before it is proudly marked HSS Steel (High Speed Steel). Made in Sheffield England. The Handles: While the blades may be the most important part of a woodturning tool, the handle can make a tremendous difference in the accuracy of your turning as well as how long you can turn before getting tired. Robert Larson turning tool handles were designed in consultation with a leading woodturning company (established over a century ago) to provide both a firm as well as comfortable grip that will let you do your best work for hours on end! The handle starts with a blank of quality ash wood which is shaped into a unique style with beaded grips. While other manufacturers will apply a lacquer finish to the handle, our handles have an oil finish which provides a firmer grip. A solid brass sleeve is mounted on the front of the handle to strengthen the fitting of the blade tank into the handle. Each tool has been given the best size handle for the job.
Model : 920-0150 Manufacturer : Robert Larson
  Set of Five Robert Larson Turning Tools

$199.95

Set of Five Robert Larson Turning Tools

Set of Five Robert Larson Turning Tools. Great set for the beginning wood turner. Add more tools as your skill and needs grow. Includes 3/8 inch spindle gouge, 3/4 inch roughing out gouge, 1/2 inch skew chisel, 1/4 inch parting tool, and 1/2 inch round nose scraper. Robert Larson Turning Tool Sets are a great way to begin your turning tool collection. As you become more involved in turning, simply add tools from the wide range of available turning tool profiles and accessories. Robert Larson turning tools are manufactured to the highest quality. About these quality tools: The Blades: The most important issue in a well designed turning tool is the quality of the blade. All Robert Larson blades are manufactured to precise specifications. The steel is M2 molybdenum based high speed steel which is machined from the solid in most cases. A few tools are entirely forged into shape. Next the tool is heat treated, being hardened and tempered to sixty-two degrees on the Rockwell "C" scale. By no means is this the end of the manufacturing process, as the blades are next machine ground as well. The cutting edge is carefully ground, with this being followed by hand glazing and polishing of the tool surface. Polishing is linear to the blade length, unlike other manufacturers that leave circular polishing markings on the blade. In the case of fluted tools, polishing is accomplished with specially shaped abrasive impregnated rubber wheels. A thorough quality inspection is made on each and every tool before it is proudly marked HSS Steel (High Speed Steel). Made in Sheffield England. The Handles: While the blades may be the most important part of a woodturning tool, the handle can make a tremendous difference in the accuracy of your turning as well as how long you can turn before getting tired. Robert Larson turning tool handles were designed in consultation with a leading woodturning company (established over a century ago) to provide both a firm as well as comfortable grip that will let you do your best work for hours on end! The handle starts with a blank of quality ash wood which is shaped into a unique style with beaded grips. While other manufacturers will apply a lacquer finish to the handle, our handles have an oil finish which provides a firmer grip. A solid brass sleeve is mounted on the front of the handle to strengthen the fitting of the blade tank into the handle. Each tool has been given the best size handle for the job.
Model : 920-0100 Manufacturer : Robert Larson
  Set of Three Micro Spindle Turning Tools by Robert Larson

Set of Three Micro Spindle Turning Tools by Robert Larson

Set of Three Micro Spindle Tools by Robert Larson. Here is a set of three micro spindle tools. Set contains 1/8 inch, 3/32 inch, and 3/16 inch tools, all mounted on six inch handles. Robert Larson Turning Tool Sets are a great way to begin your turning tool collection. As you become more involved in turning, simply add tools from the wide range of available turning tool profiles and accessories. Robert Larson turning tools are manufactured to the highest quality. About these quality tools: The Blades: The most important issue in a well designed turning tool is the quality of the blade. All Robert Larson blades are manufactured to precise specifications. The steel is M2 molybdenum based high speed steel which is machined from the solid in most cases. A few tools are entirely forged into shape. Next the tool is heat treated, being hardened and tempered to sixty-two degrees on the Rockwell "C" scale. By no means is this the end of the manufacturing process, as the blades are next machine ground as well. The cutting edge is carefully ground, with this being followed by hand glazing and polishing of the tool surface. Polishing is linear to the blade length, unlike other manufacturers that leave circular polishing markings on the blade. In the case of fluted tools, polishing is accomplished with specially shaped abrasive impregnated rubber wheels. A thorough quality inspection is made on each and every tool before it is proudly marked HSS Steel (High Speed Steel). Made in Sheffield England. The Handles: While the blades may be the most important part of a woodturning tool, the handle can make a tremendous difference in the accuracy of your turning as well as how long you can turn before getting tired. Robert Larson turning tool handles were designed in consultation with a leading woodturning company (established over a century ago) to provide both a firm as well as comfortable grip that will let you do your best work for hours on end! The handle starts with a blank of quality ash wood which is shaped into a unique style with beaded grips. While other manufacturers will apply a lacquer finish to the handle, our handles have an oil finish which provides a firmer grip. A solid brass sleeve is mounted on the front of the handle to strengthen the fitting of the blade tank into the handle. Each tool has been given the best size handle for the job.
Model : 920-0350 Manufacturer : Robert Larson
  Set of Three Mid-Size Turning Tools by Robert Larson

Set of Three Mid-Size Turning Tools by Robert Larson

Set of Three Mid-Size Turning Tools by Robert Larson. Three of the most popular mid-sized turning tools. Great for those getting started with lathe wood turning. Includes the versatile 3/8 inch Bowl Gouge, the very useful 1/2 inch Oval Skew and the essential 1/8 inch Parting Tool. All have 6 inch handles. Robert Larson Turning Tool Sets are a great way to begin your turning tool collection. As you become more involved in turning, simply add tools from the wide range of available turning tool profiles and accessories. Robert Larson turning tools are manufactured to the highest quality. About these quality tools: The Blades: The most important issue in a well designed turning tool is the quality of the blade. All Robert Larson blades are manufactured to precise specifications. The steel is M2 molybdenum based high speed steel which is machined from the solid in most cases. A few tools are entirely forged into shape. Next the tool is heat treated, being hardened and tempered to sixty-two degrees on the Rockwell "C" scale. By no means is this the end of the manufacturing process, as the blades are next machine ground as well. The cutting edge is carefully ground, with this being followed by hand glazing and polishing of the tool surface. Polishing is linear to the blade length, unlike other manufacturers that leave circular polishing markings on the blade. In the case of fluted tools, polishing is accomplished with specially shaped abrasive impregnated rubber wheels. A thorough quality inspection is made on each and every tool before it is proudly marked HSS Steel (High Speed Steel). Made in Sheffield England. The Handles: While the blades may be the most important part of a woodturning tool, the handle can make a tremendous difference in the accuracy of your turning as well as how long you can turn before getting tired. Robert Larson turning tool handles were designed in consultation with a leading woodturning company (established over a century ago) to provide both a firm as well as comfortable grip that will let you do your best work for hours on end! The handle starts with a blank of quality ash wood which is shaped into a unique style with beaded grips. While other manufacturers will apply a lacquer finish to the handle, our handles have an oil finish which provides a firmer grip. A solid brass sleeve is mounted on the front of the handle to strengthen the fitting of the blade tank into the handle. Each tool has been given the best size handle for the job.
Model : 920-0400 Manufacturer : Robert Larson
  Set of Three Spindle Turning Tools by Robert Larson

Set of Three Spindle Turning Tools by Robert Larson

Set of Three Spindle Tools by Robert Larson. Spindle tools are possibly the most commonly used and useful tools available to the woodturner. This set of three tools contains 1/4 inch, 3/8 inch, and 1/2 inch full-size spindle tools. Robert Larson Turning Tool Sets are a great way to begin your turning tool collection. As you become more involved in turning, simply add tools from the wide range of available turning tool profiles and accessories. Robert Larson turning tools are manufactured to the highest quality. About these quality tools: The Blades: The most important issue in a well designed turning tool is the quality of the blade. All Robert Larson blades are manufactured to precise specifications. The steel is M2 molybdenum based high speed steel which is machined from the solid in most cases. A few tools are entirely forged into shape. Next the tool is heat treated, being hardened and tempered to sixty-two degrees on the Rockwell "C" scale. By no means is this the end of the manufacturing process, as the blades are next machine ground as well. The cutting edge is carefully ground, with this being followed by hand glazing and polishing of the tool surface. Polishing is linear to the blade length, unlike other manufacturers that leave circular polishing markings on the blade. In the case of fluted tools, polishing is accomplished with specially shaped abrasive impregnated rubber wheels. A thorough quality inspection is made on each and every tool before it is proudly marked HSS Steel (High Speed Steel). Made in Sheffield England. The Handles: While the blades may be the most important part of a woodturning tool, the handle can make a tremendous difference in the accuracy of your turning as well as how long you can turn before getting tired. Robert Larson turning tool handles were designed in consultation with a leading woodturning company (established over a century ago) to provide both a firm as well as comfortable grip that will let you do your best work for hours on end! The handle starts with a blank of quality ash wood which is shaped into a unique style with beaded grips. While other manufacturers will apply a lacquer finish to the handle, our handles have an oil finish which provides a firmer grip. A solid brass sleeve is mounted on the front of the handle to strengthen the fitting of the blade tank into the handle. Each tool has been given the best size handle for the job.
Model : 920-0375 Manufacturer : Robert Larson