R. L. Turning Accessories



  Candlestick Bit for Wood Turners - 12mm

Candlestick Bit for Wood Turners - 12mm

Candlestick Bit for Wood Turners - 12mm. Here is the quick and easy way to bore a hole for candlesticks. They are specially shaped to receive the base of a candle. Perfect for the woodturner or craftsman.
Model : 875-2012 Manufacturer : Robert Larson
  Candlestick Bit for Wood Turners - 15mm

Candlestick Bit for Wood Turners - 15mm

Candlestick Bit for Wood Turners - 15mm. Here is the quick and easy way to bore a hole for candlesticks. They are specially shaped to receive the base of a candle. Perfect for the woodturner or craftsman.
Model : 875-2015 Manufacturer : Robert Larson
  Candlestick Bit for Wood Turners - 23mm

Candlestick Bit for Wood Turners - 23mm

Candlestick Bit for Wood Turners - 23mm. Here is the quick and easy way to bore a hole for candlesticks. They are specially shaped to receive the base of a candle. Perfect for the woodturner or craftsman.
Model : 875-2023 Manufacturer : Robert Larson
  Candlestick Bit for Wood Turners - 28mm

Candlestick Bit for Wood Turners - 28mm

Candlestick Bit for Wood Turners - 28mm. Here is the quick and easy way to bore a hole for candlesticks. They are specially shaped to receive the base of a candle. Perfect for the woodturner or craftsman.
Model : 875-2028 Manufacturer : Robert Larson
  Center Finder/Marker for Wood Turning Pieces

Center Finder/Marker for Wood Turning Pieces

Center Finder/Marker for Wood Turning Pieces. Set square or cylinder work (up to 6 inches across) in the marker, tap it with a mallet, turn the wood ninety degrees and tap it again. The knife-edge blade scores the dead-center of teh wood.
Model : 860-1200 Manufacturer : Robert Larson
  Turner's Sizing Caliper - Max = 110mm Inside & 170mm Outside

Turner's Sizing Caliper - Max = 110mm Inside & 170mm Outside

Turner's Sizing Caliper - Max = 110mm Inside & 170mm Outside. These high quality French turner's calipers make gauging the thickness of a turned bowl easy and fast. Simply close the caliper on the piece being gauged and measure the thickness on the other end of the caliper.
Model : 850-2222 Manufacturer : Robert Larson
  Turner's Sizing Caliper - Max = 125mm Inside & 200mm Outside

Turner's Sizing Caliper - Max = 125mm Inside & 200mm Outside

Turner's Sizing Caliper - Max = 125mm Inside & 200mm Outside. These high quality French turner's calipers make gauging the thickness of a turned bowl easy and fast. Simply close the caliper on the piece being gauged and measure the thickness on the other end of the caliper.
Model : 850-2225 Manufacturer : Robert Larson
  Turner's Sizing Caliper - Max = 150mm Inside & 250mm Outside

Turner's Sizing Caliper - Max = 150mm Inside & 250mm Outside

Turner's Sizing Caliper - Max = 150mm Inside & 250mm Outside. These high quality French turner's calipers make gauging the thickness of a turned bowl easy and fast. Simply close the caliper on the piece being gauged and measure the thickness on the other end of the caliper.
Model : 850-2230 Manufacturer : Robert Larson
  Turner's Sizing Caliper - Max = 200mm Inside & 350mm Outside

Turner's Sizing Caliper - Max = 200mm Inside & 350mm Outside

Turner's Sizing Caliper - Max = 200mm Inside & 350mm Outside. These high quality French turner's calipers make gauging the thickness of a turned bowl easy and fast. Simply close the caliper on the piece being gauged and measure the thickness on the other end of the caliper.
Model : 850-2240 Manufacturer : Robert Larson
  Turner's Sizing Caliper - Max = 500mm Inside & 450mm Outside

Turner's Sizing Caliper - Max = 500mm Inside & 450mm Outside

Turner's Sizing Caliper - Max = 500mm Inside & 450mm Outside. These high quality French turner's calipers make gauging the thickness of a turned bowl easy and fast. Simply close the caliper on the piece being gauged and measure the thickness on the other end of the caliper.
Model : 850-2250 Manufacturer : Robert Larson